From: "Heiko Stübner" <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
To: Olof Johansson <olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org>
Cc: Grant Likely
<grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org,
Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
"linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org"
<linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org>
Subject: [PATCH v6 0/3] arm: add basic support for Rockchip Cortex-A9 SoCs
Date: Fri, 21 Jun 2013 01:29:54 +0200 [thread overview]
Message-ID: <201306210129.54629.heiko@sntech.de> (raw)
Sixth version of basic Rockchip A9 support.
This time again using the regular gate clocks as the driver got accepted into
the clock tree.
Changes since v5:
- reintroduce the use of the gate clocks
Changes since v4:
- remove ifdef around l2x0 init
- only use dummy clocks
Changes since v3:
- split out standalone dw_mmc patches (submitted to linux-mmc)
- Remove divider and mux clocks and use fixed rate clocks instead until
divider and mux clocks have got their generic dt bindings
- Make the gate clock use CLK_OF_DECLARE and document the bindings
Changes since v2:
- use common (pending review) HIWORD_MASK clock flag from Haojian Zhuang and me
- pinctrl driver is already in the pinctrl tree
- add core-periph clock that supplies the twd
- split "mmc: dw_mmc-pltfm: add Rockchip variant" into move and feature parts
as suggested by Andy Shevchenko
Changes since v1:
- addressed Linus Walleij's comments to the pinctrl driver, including the
move to generic pinconfig (hopefully I did catch all)
- renamed the clocks to use the SoC name of the initial user
as suggested by Olof Johansson
- fixed the uart address, found by Arnd Bergmann
- address Arnd's comments on the board file (use of_clk_init and friends,
remove map_io, use real soc names)
- removed Makefile.boot as suggested by Thomas Petazzoni
no dependencies
Heiko Stuebner (3):
arm: Add basic clocks for Rockchip rk3066a SoCs
arm: add debug uarts for rockchip rk29xx and rk3xxx series
arm: add basic support for Rockchip RK3066a boards
arch/arm/Kconfig | 2 +
arch/arm/Kconfig.debug | 34 +++
arch/arm/Makefile | 1 +
arch/arm/boot/dts/rk3066a-clocks.dtsi | 299 +++++++++++++++++++++++++
arch/arm/boot/dts/rk3066a.dtsi | 390 +++++++++++++++++++++++++++++++++
arch/arm/include/debug/rockchip.S | 42 ++++
arch/arm/mach-rockchip/Kconfig | 16 ++
arch/arm/mach-rockchip/Makefile | 1 +
arch/arm/mach-rockchip/rockchip.c | 52 +++++
9 files changed, 837 insertions(+)
create mode 100644 arch/arm/boot/dts/rk3066a-clocks.dtsi
create mode 100644 arch/arm/boot/dts/rk3066a.dtsi
create mode 100644 arch/arm/include/debug/rockchip.S
create mode 100644 arch/arm/mach-rockchip/Kconfig
create mode 100644 arch/arm/mach-rockchip/Makefile
create mode 100644 arch/arm/mach-rockchip/rockchip.c
--
1.7.10.4
next reply other threads:[~2013-06-20 23:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-06-20 23:29 Heiko Stübner [this message]
[not found] ` <201306210129.54629.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-06-20 23:30 ` [PATCH v6 1/3] arm: Add basic clocks for Rockchip rk3066a SoCs Heiko Stübner
[not found] ` <201306210130.33033.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-06-21 1:22 ` Mike Turquette
2013-06-20 23:31 ` [PATCH v6 2/3] arm: add debug uarts for rockchip rk29xx and rk3xxx series Heiko Stübner
[not found] ` <201306210131.11224.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-06-21 7:30 ` Olof Johansson
2013-06-20 23:31 ` [PATCH v6 3/3] arm: add basic support for Rockchip RK3066a boards Heiko Stübner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201306210129.54629.heiko@sntech.de \
--to=heiko-4mtyjxux2i+zqb+pc5nmwq@public.gmane.org \
--cc=devicetree-discuss-uLR06cmDAlY/bJ5BZ2RsiQ@public.gmane.org \
--cc=grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
--cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
--cc=olof-nZhT3qVonbNeoWH0uzbU5w@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).