From: "Heiko Stübner" <heiko@sntech.de>
To: John Stultz <john.stultz@linaro.org>
Cc: Thomas Gleixner <tglx@linutronix.de>,
Jamie Iles <jamie@jamieiles.com>,
Dinh Nguyen <dinguyen@altera.com>,
Grant Likely <grant.likely@linaro.org>,
linux-arm-kernel@lists.infradead.org,
Rob Herring <rob.herring@calxeda.com>,
devicetree-discuss@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Arnd Bergmann <arnd@arndb.de>,
Olof Johansson <olof@lixom.net>,
Ulrich Prinz <ulrich.prinz@googlemail.com>
Subject: [PATCH 9/9] clocksource: dw_apb_timer: special variant for rockchip rk3188 timers
Date: Sat, 6 Jul 2013 00:56:29 +0200 [thread overview]
Message-ID: <201307060056.29370.heiko@sntech.de> (raw)
In-Reply-To: <201307060051.09716.heiko@sntech.de>
The rk3188 uses a variant of the timer containing two registers for load_count
and current_values.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
.../bindings/arm/rockchip/rk3188-timer.txt | 20 ++++++++++++++++++++
drivers/clocksource/dw_apb_timer_of.c | 6 ++++++
2 files changed, 26 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/rockchip/rk3188-timer.txt
diff --git a/Documentation/devicetree/bindings/arm/rockchip/rk3188-timer.txt b/Documentation/devicetree/bindings/arm/rockchip/rk3188-timer.txt
new file mode 100644
index 0000000..ccbb389
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/rockchip/rk3188-timer.txt
@@ -0,0 +1,20 @@
+Rockchip rk3188 timer:
+----------------------
+
+The rk3188 SoCs contain a slightly modified dw-apb-timer.
+
+Required node properties:
+- compatible value : = "rockchip,rk3188-dw-apb-timer-osc";
+
+For the other properties see the generic documentation in
+../../rtc/dw-apb.txt
+
+Example:
+
+ timer3: timer@ffe00000 {
+ compatible = "rockchip,rk3188-dw-apb-timer-osc";
+ interrupts = <0 170 4>;
+ reg = <0xffe00000 0x1000>;
+ clocks = <&timer_clk>, <&timer_pclk>;
+ clock-names = "timer", "pclk";
+ };
diff --git a/drivers/clocksource/dw_apb_timer_of.c b/drivers/clocksource/dw_apb_timer_of.c
index 4bcc1c1..7824796 100644
--- a/drivers/clocksource/dw_apb_timer_of.c
+++ b/drivers/clocksource/dw_apb_timer_of.c
@@ -38,6 +38,11 @@ static void timer_get_base_and_rate(struct device_node *np,
*quirks = 0;
+ if (of_device_is_compatible(np, "rockchip,rk3188-dw-apb-timer-osc"))
+ *quirks |= APBTMR_QUIRK_64BIT_COUNTER | APBTMR_QUIRK_NO_EOI |
+ APBTMR_QUIRK_INVERSE_INTMASK |
+ APBTMR_QUIRK_INVERSE_PERIODIC;
+
/*
* Not all implementations use a periphal clock, so don't panic
* if it's not present
@@ -165,3 +170,4 @@ static void __init dw_apb_timer_init(struct device_node *timer)
}
CLOCKSOURCE_OF_DECLARE(pc3x2_timer, "picochip,pc3x2-timer", dw_apb_timer_init);
CLOCKSOURCE_OF_DECLARE(apb_timer, "snps,dw-apb-timer-osc", dw_apb_timer_init);
+CLOCKSOURCE_OF_DECLARE(rk3188_timer, "rockchip,rk3188-dw-apb-timer-osc", dw_apb_timer_init);
--
1.7.10.4
next prev parent reply other threads:[~2013-07-05 22:56 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-07-05 22:51 [PATCH 0/9] clocksource: dw_apb_timer: support for timer variant used in rk3188 SoCs Heiko Stübner
2013-07-05 22:51 ` [PATCH 1/9] clocksource: dw_apb_timer: infrastructure to handle quirks Heiko Stübner
2013-07-05 22:52 ` [PATCH 2/9] clocksource: dw_apb_timer: flexible register addresses Heiko Stübner
2013-07-05 22:53 ` [PATCH 3/9] clocksource: dw_apb_timer: quirk for variants with 64bit counter Heiko Stübner
[not found] ` <201307060053.10182.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-07-05 23:45 ` Thomas Gleixner
2013-07-06 20:19 ` Ulrich Prinz
2013-07-05 22:53 ` [PATCH 4/9] clocksource: dw_apb_timer: use the eoi callback to clear pending interrupts Heiko Stübner
2013-07-05 22:59 ` Heiko Stübner
2013-07-05 22:54 ` [PATCH 5/9] clocksource: dw_apb_timer: quirk for variants without EOI register Heiko Stübner
[not found] ` <201307060054.07784.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-07-05 22:58 ` Heiko Stübner
2013-07-05 23:49 ` Thomas Gleixner
2013-07-05 22:54 ` [PATCH 6/9] clocksource: dw_apb_timer: quirk for inverted int mask Heiko Stübner
2013-07-05 22:58 ` Heiko Stübner
[not found] ` <201307060054.35996.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-07-05 23:51 ` Thomas Gleixner
[not found] ` <201307060051.09716.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-07-05 22:55 ` [PATCH 7/9] clocksource: dw_apb_timer: quirk for inverted timer mode setting Heiko Stübner
2013-07-05 22:56 ` [PATCH 8/9] clocksource: dw_apb_timer_of: add quirk handling Heiko Stübner
2013-07-05 22:56 ` Heiko Stübner [this message]
[not found] ` <201307060056.29370.heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
2013-07-06 0:12 ` [PATCH 9/9] clocksource: dw_apb_timer: special variant for rockchip rk3188 timers Thomas Gleixner
2013-07-06 20:28 ` Ulrich Prinz
[not found] ` <51D87E04.3060704-gM/Ye1E23mwN+BqQ9rBEUg@public.gmane.org>
2013-07-06 21:00 ` Thomas Gleixner
2013-07-11 22:44 ` Ulrich Prinz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=201307060056.29370.heiko@sntech.de \
--to=heiko@sntech.de \
--cc=arnd@arndb.de \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=dinguyen@altera.com \
--cc=grant.likely@linaro.org \
--cc=jamie@jamieiles.com \
--cc=john.stultz@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olof@lixom.net \
--cc=rob.herring@calxeda.com \
--cc=tglx@linutronix.de \
--cc=ulrich.prinz@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).