From mboxrd@z Thu Jan 1 00:00:00 1970 From: Steffen Trumtrar Subject: Re: [PATCH v4] regulator: pfuze100: add pfuze100 regulator driver Date: Wed, 24 Jul 2013 12:18:59 +0200 Message-ID: <20130724101859.GF4332@pengutronix.de> References: <1374398247-11384-1-git-send-email-b38343@freescale.com> <20130724083041.GC4332@pengutronix.de> <20130724100717.GA7786@Robin-OptiPlex-780> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <20130724100717.GA7786@Robin-OptiPlex-780> Sender: linux-doc-owner@vger.kernel.org To: Robin Gong Cc: broonie@kernel.org, shawn.guo@linaro.org, grant.likely@linaro.org, rob.herring@calxeda.com, rob@landley.net, lgirdwood@gmail.com, devicetree-discuss@lists.ozlabs.org, linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Wed, Jul 24, 2013 at 06:07:18PM +0800, Robin Gong wrote: > On Wed, Jul 24, 2013 at 10:30:41AM +0200, Steffen Trumtrar wrote: > > Hi! > > > > I tested your patch and had to change two things to actually make it > > work. See below... > > > > On Sun, Jul 21, 2013 at 05:17:27PM +0800, Robin Gong wrote: > > > Add pfuze100 regulator driver. > > > > > > Signed-off-by: Robin Gong > > > > (...) > > > > > --- > > > > > diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c > > > new file mode 100644 > > > index 0000000..fd259ef > > > --- /dev/null > > > +++ b/drivers/regulator/pfuze100-regulator.c > > > @@ -0,0 +1,462 @@ > > > > (...) > > > > > +static struct regulator_ops pfuze100_ldo_regulator_ops = { > > > + .enable = regulator_enable_regmap, > > > + .disable = regulator_disable_regmap, > > > + .is_enabled = regulator_is_enabled_regmap, > > > + .list_voltage = regulator_list_voltage_linear, > > > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > > > + .get_voltage_sel = regulator_get_voltage_sel_regmap, > > > +}; > > > + > > > +static struct regulator_ops pfuze100_fixed_regulator_ops = { > > > + .list_voltage = regulator_list_voltage_linear, > > > +}; > > > > > > This needs: > > > > diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c > > index 07d5a54..d0d67b4 100644 > > --- a/drivers/regulator/pfuze100-regulator.c > > +++ b/drivers/regulator/pfuze100-regulator.c > > @@ -133,6 +133,7 @@ static struct regulator_ops pfuze100_ldo_regulator_ops = { > > > > static struct regulator_ops pfuze100_fixed_regulator_ops = { > > .list_voltage = regulator_list_voltage_linear, > > + .set_voltage_sel = regulator_set_voltage_sel_regmap, > > }; > > > > static struct regulator_ops pfuze100_sw_regulator_ops = { > > > > > > Otherwise the fixed_regulator VDDR isn't registered and the driver then unloads > > completely. This is at least the case for v3.10. I haven't had the chance to test > > it on v3.11-rcX. If the _regulator_do_set_voltage logic changes, then scratch this. > > > Thanks firstly for you test with the patch. I have test it on v3.10 just now, > and can't reproduce what you saw that VDDR regulator can't be registered > successfully. I don't think fixed regulator need . Okay. I rechecked and I was doing it wrong. I had the min/max voltage propreties in the DT and missed the "regulator-boot-on;" property. Works fine now. Thanks, Steffen -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |