* [PATCH V2 1/5] regmap: add helper macro to set min/max range of register
2013-09-20 12:30 [PATCH V2 0/5] Add AMS AS3722 mfd, GPIO, regulator and RTC driver Laxman Dewangan
@ 2013-09-20 12:30 ` Laxman Dewangan
2013-09-20 16:56 ` Mark Brown
2013-09-20 12:30 ` [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC Laxman Dewangan
` (3 subsequent siblings)
4 siblings, 1 reply; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-20 12:30 UTC (permalink / raw)
To: lee.jones, sameo, broonie, linus.walleij, akpm
Cc: devicetree, linux-doc, linux-kernel, linux-gpio, rtc-linux,
rob.herring, mark.rutland, pawel.moll, swarren, rob,
ijc+devicetree, grant.likely, Laxman Dewangan
Add helper macro to set the min and max value of the register range.
This is useful when initialising the register ranges of the device like
static const struct regmap_range readable_ranges[] = {
regmap_reg_range(DEVICE_REG0, DEVICE_REG10),
};
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
---
As per Mark's comment on V1 series, adding the macro in header in place
of defining in driver.
This should go on same tree as 2/5.
include/linux/regmap.h | 2 ++
1 files changed, 2 insertions(+), 0 deletions(-)
diff --git a/include/linux/regmap.h b/include/linux/regmap.h
index 4c8c20a..047e8dc 100644
--- a/include/linux/regmap.h
+++ b/include/linux/regmap.h
@@ -70,6 +70,8 @@ struct regmap_range {
unsigned int range_max;
};
+#define regmap_reg_range(low, high) { .range_min = low, .range_max = high, }
+
/*
* A table of ranges including some yes ranges and some no ranges.
* If a register belongs to a no_range, the corresponding check function
--
1.7.1.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH V2 1/5] regmap: add helper macro to set min/max range of register
2013-09-20 12:30 ` [PATCH V2 1/5] regmap: add helper macro to set min/max range of register Laxman Dewangan
@ 2013-09-20 16:56 ` Mark Brown
0 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-09-20 16:56 UTC (permalink / raw)
To: Laxman Dewangan
Cc: lee.jones, sameo, linus.walleij, akpm, devicetree, linux-doc,
linux-kernel, linux-gpio, rtc-linux, rob.herring, mark.rutland,
pawel.moll, swarren, rob, ijc+devicetree, grant.likely
[-- Attachment #1: Type: text/plain, Size: 402 bytes --]
On Fri, Sep 20, 2013 at 06:00:10PM +0530, Laxman Dewangan wrote:
> Add helper macro to set the min and max value of the register range.
>
> This is useful when initialising the register ranges of the device like
Applied on a branch, thanks - please feel free to pull
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap.git regmap-range-macro
in for anything that depends on it.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC
2013-09-20 12:30 [PATCH V2 0/5] Add AMS AS3722 mfd, GPIO, regulator and RTC driver Laxman Dewangan
2013-09-20 12:30 ` [PATCH V2 1/5] regmap: add helper macro to set min/max range of register Laxman Dewangan
@ 2013-09-20 12:30 ` Laxman Dewangan
2013-09-20 12:39 ` Lee Jones
2013-09-20 12:30 ` [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver Laxman Dewangan
` (2 subsequent siblings)
4 siblings, 1 reply; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-20 12:30 UTC (permalink / raw)
To: lee.jones, sameo, broonie, linus.walleij, akpm
Cc: devicetree, linux-doc, linux-kernel, linux-gpio, rtc-linux,
rob.herring, mark.rutland, pawel.moll, swarren, rob,
ijc+devicetree, grant.likely, Laxman Dewangan, Florian Lobmaier
The AMS AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
controller, 11 LDOs, RTC, automatic battery, temperature and
over-current monitoring, 8 GPIOs, ADC and wathdog.
Add mfd core driver for the AS3722 to support core functionality.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
---
Changes from V1:
- Remove compatible string from DT for subnode.
- Nit cleanups in driver and use module_i2c_driver
Documentation/devicetree/bindings/mfd/as3722.txt | 47 +++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/as3722.c | 448 ++++++++++++++++++++++
include/linux/mfd/as3722.h | 423 ++++++++++++++++++++
5 files changed, 931 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/as3722.txt
create mode 100644 drivers/mfd/as3722.c
create mode 100644 include/linux/mfd/as3722.h
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
new file mode 100644
index 0000000..618e5be
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt
@@ -0,0 +1,47 @@
+* AMS AS3722 Power management IC.
+
+Required properties:
+-------------------
+- compatible : Must be "ams,as3722".
+- reg: I2C device address.
+- interrupt-controller : AS3722 has its own internal IRQs
+- #interrupt-cells : should be set to 2 for IRQ number and flags
+ The first cell is the IRQ number.
+ The second cell is the flags, encoded as the trigger masks from
+ Documentation/devicetree/bindings/interrupts.txt, using
+ the #defines found in dt-bindings/irq.
+- interrupt-parent : The parent interrupt controller.
+
+Optional properties:
+-------------------
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Number of GPIO cells. Refer
+ Documentation/devicetree/bindings/gpio/gpio.txt
+
+Example:
+--------
+ams3722 {
+ compatible = "ams,as3722";
+ reg = <0x48>
+
+ interrupt-parent = <&intc>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio {
+ /*
+ * GPIO related properties
+ * Refer document bindings/gpio/gpio-as3722.txt
+ */
+ };
+
+ regulators {
+ /*
+ * Regulator related properties
+ * Refer document bindings/regulator/as3722-regulator.txt
+ */
+ };
+};
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 914c3d1..694d226 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -27,6 +27,18 @@ config MFD_AS3711
help
Support for the AS3711 PMIC from AMS
+config MFD_AS3722
+ bool "AMS AS3722 Power Management IC"
+ select MFD_CORE
+ select REGMAP_I2C
+ select REGMAP_IRQ
+ depends on I2C && OF
+ help
+ The AMS AS3722 is a compact system PMU suitable for mobile phones,
+ tablet etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
+ controller, 11 LDOs, RTC, automatic battery, temperature and
+ over current monitoring, GPIOs, ADC, watchdog.
+
config PMIC_ADP5520
bool "Analog Devices ADP5520/01 MFD PMIC Core Support"
depends on I2C=y
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 15b905c..d8c2ba1 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -162,3 +162,4 @@ obj-$(CONFIG_MFD_LM3533) += lm3533-core.o lm3533-ctrlbank.o
obj-$(CONFIG_VEXPRESS_CONFIG) += vexpress-config.o vexpress-sysreg.o
obj-$(CONFIG_MFD_RETU) += retu-mfd.o
obj-$(CONFIG_MFD_AS3711) += as3711.o
+obj-$(CONFIG_MFD_AS3722) += as3722.o
diff --git a/drivers/mfd/as3722.c b/drivers/mfd/as3722.c
new file mode 100644
index 0000000..460f59c
--- /dev/null
+++ b/drivers/mfd/as3722.c
@@ -0,0 +1,448 @@
+/*
+ * Core driver for AMS AS3722 PMICs
+ *
+ * Copyright (C) 2013 ams AG
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define AS3722_DEVICE_ID 0x0C
+
+static const struct resource as3722_rtc_resource[] = {
+ {
+ .name = "as3722-rtc-alarm",
+ .start = AS3722_IRQ_RTC_ALARM,
+ .end = AS3722_IRQ_RTC_ALARM,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static const struct resource as3722_adc_resource[] = {
+ {
+ .name = "as3722-adc",
+ .start = AS3722_IRQ_ADC,
+ .end = AS3722_IRQ_ADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell as3722_devs[] = {
+ {
+ .name = "as3722-gpio",
+ },
+ {
+ .name = "as3722-regulator",
+ },
+ {
+ .name = "as3722-rtc",
+ .num_resources = ARRAY_SIZE(as3722_rtc_resource),
+ .resources = as3722_rtc_resource,
+ },
+ {
+ .name = "as3722-adc",
+ .num_resources = ARRAY_SIZE(as3722_adc_resource),
+ .resources = as3722_adc_resource,
+ },
+ {
+ .name = "as3722-power-off",
+ },
+};
+
+static const struct regmap_irq as3722_irqs[] = {
+ /* INT1 IRQs */
+ [AS3722_IRQ_LID] = {
+ .mask = AS3722_INTERRUPT_MASK1_LID,
+ },
+ [AS3722_IRQ_ACOK] = {
+ .mask = AS3722_INTERRUPT_MASK1_ACOK,
+ },
+ [AS3722_IRQ_ENABLE1] = {
+ .mask = AS3722_INTERRUPT_MASK1_ENABLE1,
+ },
+ [AS3722_IRQ_OCCUR_ALARM_SD0] = {
+ .mask = AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0,
+ },
+ [AS3722_IRQ_ONKEY_LONG_PRESS] = {
+ .mask = AS3722_INTERRUPT_MASK1_ONKEY_LONG,
+ },
+ [AS3722_IRQ_ONKEY] = {
+ .mask = AS3722_INTERRUPT_MASK1_ONKEY,
+ },
+ [AS3722_IRQ_OVTMP] = {
+ .mask = AS3722_INTERRUPT_MASK1_OVTMP,
+ },
+ [AS3722_IRQ_LOWBAT] = {
+ .mask = AS3722_INTERRUPT_MASK1_LOWBAT,
+ },
+
+ /* INT2 IRQs */
+ [AS3722_IRQ_SD0_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD0_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD1_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD1_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD2_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD2345_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_PWM1_OV_PROT] = {
+ .mask = AS3722_INTERRUPT_MASK2_PWM1_OV_PROT,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_PWM2_OV_PROT] = {
+ .mask = AS3722_INTERRUPT_MASK2_PWM2_OV_PROT,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_ENABLE2] = {
+ .mask = AS3722_INTERRUPT_MASK2_ENABLE2,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_SD6_LV] = {
+ .mask = AS3722_INTERRUPT_MASK2_SD6_LV,
+ .reg_offset = 1,
+ },
+ [AS3722_IRQ_RTC_REP] = {
+ .mask = AS3722_INTERRUPT_MASK2_RTC_REP,
+ .reg_offset = 1,
+ },
+
+ /* INT3 IRQs */
+ [AS3722_IRQ_RTC_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK3_RTC_ALARM,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO1] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO1,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO2] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO2,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO3] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO3,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO4] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO4,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_GPIO5] = {
+ .mask = AS3722_INTERRUPT_MASK3_GPIO5,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_WATCHDOG] = {
+ .mask = AS3722_INTERRUPT_MASK3_WATCHDOG,
+ .reg_offset = 2,
+ },
+ [AS3722_IRQ_ENABLE3] = {
+ .mask = AS3722_INTERRUPT_MASK3_ENABLE3,
+ .reg_offset = 2,
+ },
+
+ /* INT4 IRQs */
+ [AS3722_IRQ_TEMP_SD0_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD1_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD2_SHUTDOWN] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD0_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD1_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_TEMP_SD6_ALARM] = {
+ .mask = AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_OCCUR_ALARM_SD6] = {
+ .mask = AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6,
+ .reg_offset = 3,
+ },
+ [AS3722_IRQ_ADC] = {
+ .mask = AS3722_INTERRUPT_MASK4_ADC,
+ .reg_offset = 3,
+ },
+};
+
+static const struct regmap_irq_chip as3722_irq_chip = {
+ .name = "as3722",
+ .irqs = as3722_irqs,
+ .num_irqs = ARRAY_SIZE(as3722_irqs),
+ .num_regs = 4,
+ .status_base = AS3722_INTERRUPT_STATUS1_REG,
+ .mask_base = AS3722_INTERRUPT_MASK1_REG,
+};
+
+static int as3722_check_device_id(struct as3722 *as3722)
+{
+ u32 val;
+ int ret;
+
+ /* Check that this is actually a AS3722 */
+ ret = as3722_read(as3722, AS3722_ASIC_ID1_REG, &val);
+ if (ret < 0) {
+ dev_err(as3722->dev, "ASIC_ID1 read failed: %d\n", ret);
+ return ret;
+ }
+
+ if (val != AS3722_DEVICE_ID) {
+ dev_err(as3722->dev, "Device is not AS3722, ID is 0x%x\n", val);
+ return -ENODEV;
+ }
+
+ ret = as3722_read(as3722, AS3722_ASIC_ID2_REG, &val);
+ if (ret < 0) {
+ dev_err(as3722->dev, "ASIC_ID2 read failed: %d\n", ret);
+ return ret;
+ }
+
+ dev_info(as3722->dev, "AS3722 with revision 0x%x found\n", val);
+ return 0;
+}
+
+static int as3722_configure_pullups(struct as3722 *as3722)
+{
+ int ret;
+ u32 val = 0;
+
+ if (as3722->en_intern_int_pullup)
+ val |= AS3722_INT_PULL_UP;
+ if (as3722->en_intern_i2c_pullup)
+ val |= AS3722_I2C_PULL_UP;
+
+ ret = as3722_update_bits(as3722, AS3722_IOVOLTAGE_REG,
+ AS3722_INT_PULL_UP | AS3722_I2C_PULL_UP, val);
+ if (ret < 0)
+ dev_err(as3722->dev, "IOVOLTAGE_REG update failed: %d\n", ret);
+ return ret;
+}
+
+static const struct regmap_range as3722_readable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
+ regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
+ regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_REG_SEQU_MOD3_REG),
+ regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
+ regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
+ regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
+ AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
+ regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
+ regmap_reg_range(AS3722_RTC_ACCESS_REG, AS3722_RTC_ACCESS_REG),
+ regmap_reg_range(AS3722_RTC_STATUS_REG, AS3722_TEMP_STATUS_REG),
+ regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC_CONFIGURATION_REG),
+ regmap_reg_range(AS3722_ASIC_ID1_REG, AS3722_ASIC_ID2_REG),
+ regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+};
+
+static const struct regmap_access_table as3722_readable_table = {
+ .yes_ranges = as3722_readable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(as3722_readable_ranges),
+};
+
+static const struct regmap_range as3722_writable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_SD6_VOLTAGE_REG),
+ regmap_reg_range(AS3722_GPIO0_CONTROL_REG, AS3722_LDO7_VOLTAGE_REG),
+ regmap_reg_range(AS3722_LDO9_VOLTAGE_REG, AS3722_GPIO_SIGNAL_OUT_REG),
+ regmap_reg_range(AS3722_REG_SEQU_MOD1_REG, AS3722_REG_SEQU_MOD3_REG),
+ regmap_reg_range(AS3722_SD_PHSW_CTRL_REG, AS3722_PWM_CONTROL_H_REG),
+ regmap_reg_range(AS3722_WATCHDOG_TIMER_REG, AS3722_WATCHDOG_TIMER_REG),
+ regmap_reg_range(AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG,
+ AS3722_BATTERY_VOLTAGE_MONITOR2_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_PWM_VCONTROL4_REG),
+ regmap_reg_range(AS3722_BB_CHARGER_REG, AS3722_SRAM_REG),
+ regmap_reg_range(AS3722_INTERRUPT_MASK1_REG, AS3722_TEMP_STATUS_REG),
+ regmap_reg_range(AS3722_ADC0_CONTROL_REG, AS3722_ADC1_CONTROL_REG),
+ regmap_reg_range(AS3722_ADC1_THRESHOLD_HI_MSB_REG,
+ AS3722_ADC_CONFIGURATION_REG),
+ regmap_reg_range(AS3722_LOCK_REG, AS3722_LOCK_REG),
+};
+
+static const struct regmap_access_table as3722_writable_table = {
+ .yes_ranges = as3722_writable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(as3722_writable_ranges),
+};
+
+static const struct regmap_range as3722_cacheable_ranges[] = {
+ regmap_reg_range(AS3722_SD0_VOLTAGE_REG, AS3722_LDO11_VOLTAGE_REG),
+ regmap_reg_range(AS3722_SD_CONTROL_REG, AS3722_LDOCONTROL1_REG),
+};
+
+static const struct regmap_access_table as3722_volatile_table = {
+ .no_ranges = as3722_cacheable_ranges,
+ .n_no_ranges = ARRAY_SIZE(as3722_cacheable_ranges),
+};
+
+const struct regmap_config as3722_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = AS3722_MAX_REGISTER,
+ .cache_type = REGCACHE_RBTREE,
+ .rd_table = &as3722_readable_table,
+ .wr_table = &as3722_writable_table,
+ .volatile_table = &as3722_volatile_table,
+};
+
+static int as3722_i2c_of_probe(struct i2c_client *i2c,
+ struct as3722 *as3722)
+{
+ struct device_node *np = i2c->dev.of_node;
+ struct irq_data *irq_data;
+
+ if (!np) {
+ dev_err(&i2c->dev, "Device is not having of_node\n");
+ return -EINVAL;
+ }
+
+ irq_data = irq_get_irq_data(i2c->irq);
+ if (!irq_data) {
+ dev_err(&i2c->dev, "Invalid IRQ: %d\n", i2c->irq);
+ return -EINVAL;
+ }
+
+ as3722->en_intern_int_pullup = of_property_read_bool(np,
+ "ams,enable-internal-int-pullup");
+ as3722->en_intern_i2c_pullup = of_property_read_bool(np,
+ "ams,enable-internal-i2c-pullup");
+ as3722->irq_flags = irqd_get_trigger_type(irq_data);
+ dev_dbg(&i2c->dev, "Irq flag is 0x%08lx\n", as3722->irq_flags);
+ return 0;
+}
+
+static int as3722_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id)
+{
+ struct as3722 *as3722;
+ unsigned long irq_flags;
+ int ret;
+
+ as3722 = devm_kzalloc(&i2c->dev, sizeof(struct as3722), GFP_KERNEL);
+ if (!as3722)
+ return -ENOMEM;
+
+ as3722->dev = &i2c->dev;
+ as3722->chip_irq = i2c->irq;
+ i2c_set_clientdata(i2c, as3722);
+
+ ret = as3722_i2c_of_probe(i2c, as3722);
+ if (ret < 0)
+ return ret;
+
+ as3722->regmap = devm_regmap_init_i2c(i2c, &as3722_regmap_config);
+ if (IS_ERR(as3722->regmap)) {
+ ret = PTR_ERR(as3722->regmap);
+ dev_err(&i2c->dev, "regmap_init failed with err: %d\n", ret);
+ return ret;
+ }
+
+ ret = as3722_check_device_id(as3722);
+ if (ret < 0)
+ return ret;
+
+ irq_flags = as3722->irq_flags | IRQF_ONESHOT;
+ ret = regmap_add_irq_chip(as3722->regmap, as3722->chip_irq,
+ irq_flags, -1, &as3722_irq_chip,
+ &as3722->irq_data);
+ if (ret < 0) {
+ dev_err(as3722->dev, "regmap_add_irq failed: %d\n", ret);
+ return ret;
+ }
+
+ ret = as3722_configure_pullups(as3722);
+ if (ret < 0)
+ goto scrub;
+
+ ret = mfd_add_devices(&i2c->dev, -1, as3722_devs,
+ ARRAY_SIZE(as3722_devs), NULL, 0,
+ regmap_irq_get_domain(as3722->irq_data));
+ if (ret) {
+ dev_err(as3722->dev, "mfd_add_devices() failed: %d\n", ret);
+ goto scrub;
+ }
+
+ dev_dbg(as3722->dev, "AS3722 core driver initialized successfully\n");
+ return 0;
+scrub:
+ regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
+ return ret;
+}
+
+static int as3722_i2c_remove(struct i2c_client *i2c)
+{
+ struct as3722 *as3722 = i2c_get_clientdata(i2c);
+
+ mfd_remove_devices(as3722->dev);
+ regmap_del_irq_chip(as3722->chip_irq, as3722->irq_data);
+ return 0;
+}
+
+static const struct of_device_id as3722_of_match[] = {
+ { .compatible = "ams,as3722", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, as3722_of_match);
+
+static const struct i2c_device_id as3722_i2c_id[] = {
+ { "as3722", 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, as3722_i2c_id);
+
+static struct i2c_driver as3722_i2c_driver = {
+ .driver = {
+ .name = "as3722",
+ .owner = THIS_MODULE,
+ .of_match_table = as3722_of_match,
+ },
+ .probe = as3722_i2c_probe,
+ .remove = as3722_i2c_remove,
+ .id_table = as3722_i2c_id,
+};
+
+module_i2c_driver(as3722_i2c_driver);
+
+MODULE_DESCRIPTION("I2C support for AS3722 PMICs");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/mfd/as3722.h b/include/linux/mfd/as3722.h
new file mode 100644
index 0000000..16bf8a0
--- /dev/null
+++ b/include/linux/mfd/as3722.h
@@ -0,0 +1,423 @@
+/*
+ * as3722 definitions
+ *
+ * Copyright (C) 2013 ams
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#ifndef __LINUX_MFD_AS3722_H__
+#define __LINUX_MFD_AS3722_H__
+
+#include <linux/regmap.h>
+
+/* AS3722 registers */
+#define AS3722_SD0_VOLTAGE_REG 0x00
+#define AS3722_SD1_VOLTAGE_REG 0x01
+#define AS3722_SD2_VOLTAGE_REG 0x02
+#define AS3722_SD3_VOLTAGE_REG 0x03
+#define AS3722_SD4_VOLTAGE_REG 0x04
+#define AS3722_SD5_VOLTAGE_REG 0x05
+#define AS3722_SD6_VOLTAGE_REG 0x06
+#define AS3722_GPIO0_CONTROL_REG 0x08
+#define AS3722_GPIO1_CONTROL_REG 0x09
+#define AS3722_GPIO2_CONTROL_REG 0x0A
+#define AS3722_GPIO3_CONTROL_REG 0x0B
+#define AS3722_GPIO4_CONTROL_REG 0x0C
+#define AS3722_GPIO5_CONTROL_REG 0x0D
+#define AS3722_GPIO6_CONTROL_REG 0x0E
+#define AS3722_GPIO7_CONTROL_REG 0x0F
+#define AS3722_LDO0_VOLTAGE_REG 0x10
+#define AS3722_LDO1_VOLTAGE_REG 0x11
+#define AS3722_LDO2_VOLTAGE_REG 0x12
+#define AS3722_LDO3_VOLTAGE_REG 0x13
+#define AS3722_LDO4_VOLTAGE_REG 0x14
+#define AS3722_LDO5_VOLTAGE_REG 0x15
+#define AS3722_LDO6_VOLTAGE_REG 0x16
+#define AS3722_LDO7_VOLTAGE_REG 0x17
+#define AS3722_LDO9_VOLTAGE_REG 0x19
+#define AS3722_LDO10_VOLTAGE_REG 0x1A
+#define AS3722_LDO11_VOLTAGE_REG 0x1B
+#define AS3722_GPIO_DEB1_REG 0x1E
+#define AS3722_GPIO_DEB2_REG 0x1F
+#define AS3722_GPIO_SIGNAL_OUT_REG 0x20
+#define AS3722_GPIO_SIGNAL_IN_REG 0x21
+#define AS3722_REG_SEQU_MOD1_REG 0x22
+#define AS3722_REG_SEQU_MOD2_REG 0x23
+#define AS3722_REG_SEQU_MOD3_REG 0x24
+#define AS3722_SD_PHSW_CTRL_REG 0x27
+#define AS3722_SD_PHSW_STATUS 0x28
+#define AS3722_SD0_CONTROL_REG 0x29
+#define AS3722_SD1_CONTROL_REG 0x2A
+#define AS3722_SDmph_CONTROL_REG 0x2B
+#define AS3722_SD23_CONTROL_REG 0x2C
+#define AS3722_SD4_CONTROL_REG 0x2D
+#define AS3722_SD5_CONTROL_REG 0x2E
+#define AS3722_SD6_CONTROL_REG 0x2F
+#define AS3722_SD_DVM_REG 0x30
+#define AS3722_RESET_REASON_REG 0x31
+#define AS3722_BATTERY_VOLTAGE_MONITOR_REG 0x32
+#define AS3722_STARTUP_CONTROL_REG 0x33
+#define AS3722_RESET_TIMER_REG 0x34
+#define AS3722_REFERENCE_CONTROL_REG 0x35
+#define AS3722_RESET_CONTROL_REG 0x36
+#define AS3722_OVER_TEMP_CONTROL_REG 0x37
+#define AS3722_WATCHDOG_CONTROL_REG 0x38
+#define AS3722_REG_STANDBY_MOD1_REG 0x39
+#define AS3722_REG_STANDBY_MOD2_REG 0x3A
+#define AS3722_REG_STANDBY_MOD3_REG 0x3B
+#define AS3722_ENABLE_CTRL1_REG 0x3C
+#define AS3722_ENABLE_CTRL2_REG 0x3D
+#define AS3722_ENABLE_CTRL3_REG 0x3E
+#define AS3722_ENABLE_CTRL4_REG 0x3F
+#define AS3722_ENABLE_CTRL5_REG 0x40
+#define AS3722_PWM_CONTROL_L_REG 0x41
+#define AS3722_PWM_CONTROL_H_REG 0x42
+#define AS3722_WATCHDOG_TIMER_REG 0x46
+#define AS3722_WATCHDOG_SOFTWARE_SIGNAL_REG 0x48
+#define AS3722_IOVOLTAGE_REG 0x49
+#define AS3722_BATTERY_VOLTAGE_MONITOR2_REG 0x4A
+#define AS3722_SD_CONTROL_REG 0x4D
+#define AS3722_LDOCONTROL0_REG 0x4E
+#define AS3722_LDOCONTROL1_REG 0x4F
+#define AS3722_SD0_PROTECT_REG 0x50
+#define AS3722_SD6_PROTECT_REG 0x51
+#define AS3722_PWM_VCONTROL1_REG 0x52
+#define AS3722_PWM_VCONTROL2_REG 0x53
+#define AS3722_PWM_VCONTROL3_REG 0x54
+#define AS3722_PWM_VCONTROL4_REG 0x55
+#define AS3722_BB_CHARGER_REG 0x57
+#define AS3722_CTRL_SEQU1_REG 0x58
+#define AS3722_CTRL_SEQU2_REG 0x59
+#define AS3722_OVCURRENT_REG 0x5A
+#define AS3722_OVCURRENT_DEB_REG 0x5B
+#define AS3722_SDLV_DEB_REG 0x5C
+#define AS3722_OC_PG_CTRL_REG 0x5D
+#define AS3722_OC_PG_CTRL2_REG 0x5E
+#define AS3722_CTRL_STATUS 0x5F
+#define AS3722_RTC_CONTROL_REG 0x60
+#define AS3722_RTC_SECOND_REG 0x61
+#define AS3722_RTC_MINUTE_REG 0x62
+#define AS3722_RTC_HOUR_REG 0x63
+#define AS3722_RTC_DAY_REG 0x64
+#define AS3722_RTC_MONTH_REG 0x65
+#define AS3722_RTC_YEAR_REG 0x66
+#define AS3722_RTC_ALARM_SECOND_REG 0x67
+#define AS3722_RTC_ALARM_MINUTE_REG 0x68
+#define AS3722_RTC_ALARM_HOUR_REG 0x69
+#define AS3722_RTC_ALARM_DAY_REG 0x6A
+#define AS3722_RTC_ALARM_MONTH_REG 0x6B
+#define AS3722_RTC_ALARM_YEAR_REG 0x6C
+#define AS3722_SRAM_REG 0x6D
+#define AS3722_RTC_ACCESS_REG 0x6F
+#define AS3722_RTC_STATUS_REG 0x73
+#define AS3722_INTERRUPT_MASK1_REG 0x74
+#define AS3722_INTERRUPT_MASK2_REG 0x75
+#define AS3722_INTERRUPT_MASK3_REG 0x76
+#define AS3722_INTERRUPT_MASK4_REG 0x77
+#define AS3722_INTERRUPT_STATUS1_REG 0x78
+#define AS3722_INTERRUPT_STATUS2_REG 0x79
+#define AS3722_INTERRUPT_STATUS3_REG 0x7A
+#define AS3722_INTERRUPT_STATUS4_REG 0x7B
+#define AS3722_TEMP_STATUS_REG 0x7D
+#define AS3722_ADC0_CONTROL_REG 0x80
+#define AS3722_ADC1_CONTROL_REG 0x81
+#define AS3722_ADC0_MSB_RESULT_REG 0x82
+#define AS3722_ADC0_LSB_RESULT_REG 0x83
+#define AS3722_ADC1_MSB_RESULT_REG 0x84
+#define AS3722_ADC1_LSB_RESULT_REG 0x85
+#define AS3722_ADC1_THRESHOLD_HI_MSB_REG 0x86
+#define AS3722_ADC1_THRESHOLD_HI_LSB_REG 0x87
+#define AS3722_ADC1_THRESHOLD_LO_MSB_REG 0x88
+#define AS3722_ADC1_THRESHOLD_LO_LSB_REG 0x89
+#define AS3722_ADC_CONFIGURATION_REG 0x8A
+#define AS3722_ASIC_ID1_REG 0x90
+#define AS3722_ASIC_ID2_REG 0x91
+#define AS3722_LOCK_REG 0x9E
+#define AS3722_MAX_REGISTER 0xF4
+
+#define AS3722_SD0_EXT_ENABLE_MASK 0x03
+#define AS3722_SD1_EXT_ENABLE_MASK 0x0C
+#define AS3722_SD2_EXT_ENABLE_MASK 0x30
+#define AS3722_SD3_EXT_ENABLE_MASK 0xC0
+#define AS3722_SD4_EXT_ENABLE_MASK 0x03
+#define AS3722_SD5_EXT_ENABLE_MASK 0x0C
+#define AS3722_SD6_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO0_EXT_ENABLE_MASK 0x03
+#define AS3722_LDO1_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO2_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO3_EXT_ENABLE_MASK 0xC0
+#define AS3722_LDO4_EXT_ENABLE_MASK 0x03
+#define AS3722_LDO5_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO6_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO7_EXT_ENABLE_MASK 0xC0
+#define AS3722_LDO9_EXT_ENABLE_MASK 0x0C
+#define AS3722_LDO10_EXT_ENABLE_MASK 0x30
+#define AS3722_LDO11_EXT_ENABLE_MASK 0xC0
+
+#define AS3722_OVCURRENT_SD0_ALARM_MASK 0x07
+#define AS3722_OVCURRENT_SD0_ALARM_SHIFT 0x01
+#define AS3722_OVCURRENT_SD0_TRIP_MASK 0x18
+#define AS3722_OVCURRENT_SD0_TRIP_SHIFT 0x03
+#define AS3722_OVCURRENT_SD1_TRIP_MASK 0x60
+#define AS3722_OVCURRENT_SD1_TRIP_SHIFT 0x05
+
+#define AS3722_OVCURRENT_SD6_ALARM_MASK 0x07
+#define AS3722_OVCURRENT_SD6_ALARM_SHIFT 0x01
+#define AS3722_OVCURRENT_SD6_TRIP_MASK 0x18
+#define AS3722_OVCURRENT_SD6_TRIP_SHIFT 0x03
+
+/* AS3722 register bits and bit masks */
+#define AS3722_LDO_ILIMIT_MASK BIT(7)
+#define AS3722_LDO_ILIMIT_BIT BIT(7)
+#define AS3722_LDO0_VSEL_MASK 0x1F
+#define AS3722_LDO0_VSEL_MIN 0x01
+#define AS3722_LDO0_VSEL_MAX 0x12
+#define AS3722_LDO0_NUM_VOLT 0x12
+#define AS3722_LDO3_VSEL_MASK 0x3F
+#define AS3722_LDO3_VSEL_MIN 0x01
+#define AS3722_LDO3_VSEL_MAX 0x2D
+#define AS3722_LDO3_NUM_VOLT 0x2D
+#define AS3722_LDO_VSEL_MASK 0x7F
+#define AS3722_LDO_VSEL_MIN 0x01
+#define AS3722_LDO_VSEL_MAX 0x7F
+#define AS3722_LDO_VSEL_DNU_MIN 0x25
+#define AS3722_LDO_VSEL_DNU_MAX 0x3F
+#define AS3722_LDO_NUM_VOLT 0x80
+
+#define AS3722_LDO0_CTRL BIT(0)
+#define AS3722_LDO1_CTRL BIT(1)
+#define AS3722_LDO2_CTRL BIT(2)
+#define AS3722_LDO3_CTRL BIT(3)
+#define AS3722_LDO4_CTRL BIT(4)
+#define AS3722_LDO5_CTRL BIT(5)
+#define AS3722_LDO6_CTRL BIT(6)
+#define AS3722_LDO7_CTRL BIT(7)
+#define AS3722_LDO9_CTRL BIT(1)
+#define AS3722_LDO10_CTRL BIT(2)
+#define AS3722_LDO11_CTRL BIT(3)
+
+#define AS3722_LDO3_MODE_MASK (3 << 6)
+#define AS3722_LDO3_MODE_VAL(n) (((n) & 0x3) << 6)
+#define AS3722_LDO3_MODE_PMOS AS3722_LDO3_MODE_VAL(0)
+#define AS3722_LDO3_MODE_PMOS_TRACKING AS3722_LDO3_MODE_VAL(1)
+#define AS3722_LDO3_MODE_NMOS AS3722_LDO3_MODE_VAL(2)
+#define AS3722_LDO3_MODE_SWITCH AS3722_LDO3_MODE_VAL(3)
+
+#define AS3722_SD_VSEL_MASK 0x7F
+#define AS3722_SD0_VSEL_MIN 0x01
+#define AS3722_SD0_VSEL_MAX 0x5A
+#define AS3722_SD2_VSEL_MIN 0x01
+#define AS3722_SD2_VSEL_MAX 0x7F
+
+#define AS3722_SDn_CTRL(n) BIT(n)
+
+#define AS3722_SD0_MODE_FAST BIT(4)
+#define AS3722_SD1_MODE_FAST BIT(4)
+#define AS3722_SD2_MODE_FAST BIT(2)
+#define AS3722_SD3_MODE_FAST BIT(6)
+#define AS3722_SD4_MODE_FAST BIT(2)
+#define AS3722_SD5_MODE_FAST BIT(2)
+#define AS3722_SD6_MODE_FAST BIT(4)
+
+#define AS3722_POWER_OFF BIT(1)
+
+#define AS3722_INTERRUPT_MASK1_LID BIT(0)
+#define AS3722_INTERRUPT_MASK1_ACOK BIT(1)
+#define AS3722_INTERRUPT_MASK1_ENABLE1 BIT(2)
+#define AS3722_INTERRUPT_MASK1_OCURR_ALARM_SD0 BIT(3)
+#define AS3722_INTERRUPT_MASK1_ONKEY_LONG BIT(4)
+#define AS3722_INTERRUPT_MASK1_ONKEY BIT(5)
+#define AS3722_INTERRUPT_MASK1_OVTMP BIT(6)
+#define AS3722_INTERRUPT_MASK1_LOWBAT BIT(7)
+
+#define AS3722_INTERRUPT_MASK2_SD0_LV BIT(0)
+#define AS3722_INTERRUPT_MASK2_SD1_LV BIT(1)
+#define AS3722_INTERRUPT_MASK2_SD2345_LV BIT(2)
+#define AS3722_INTERRUPT_MASK2_PWM1_OV_PROT BIT(3)
+#define AS3722_INTERRUPT_MASK2_PWM2_OV_PROT BIT(4)
+#define AS3722_INTERRUPT_MASK2_ENABLE2 BIT(5)
+#define AS3722_INTERRUPT_MASK2_SD6_LV BIT(6)
+#define AS3722_INTERRUPT_MASK2_RTC_REP BIT(7)
+
+#define AS3722_INTERRUPT_MASK3_RTC_ALARM BIT(0)
+#define AS3722_INTERRUPT_MASK3_GPIO1 BIT(1)
+#define AS3722_INTERRUPT_MASK3_GPIO2 BIT(2)
+#define AS3722_INTERRUPT_MASK3_GPIO3 BIT(3)
+#define AS3722_INTERRUPT_MASK3_GPIO4 BIT(4)
+#define AS3722_INTERRUPT_MASK3_GPIO5 BIT(5)
+#define AS3722_INTERRUPT_MASK3_WATCHDOG BIT(6)
+#define AS3722_INTERRUPT_MASK3_ENABLE3 BIT(7)
+
+#define AS3722_INTERRUPT_MASK4_TEMP_SD0_SHUTDOWN BIT(0)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD1_SHUTDOWN BIT(1)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD6_SHUTDOWN BIT(2)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD0_ALARM BIT(3)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD1_ALARM BIT(4)
+#define AS3722_INTERRUPT_MASK4_TEMP_SD6_ALARM BIT(5)
+#define AS3722_INTERRUPT_MASK4_OCCUR_ALARM_SD6 BIT(6)
+#define AS3722_INTERRUPT_MASK4_ADC BIT(7)
+
+#define AS3722_ADC1_INTERVAL_TIME BIT(0)
+#define AS3722_ADC1_INT_MODE_ON BIT(1)
+#define AS3722_ADC_BUF_ON BIT(2)
+#define AS3722_ADC1_LOW_VOLTAGE_RANGE BIT(5)
+#define AS3722_ADC1_INTEVAL_SCAN BIT(6)
+#define AS3722_ADC1_INT_MASK BIT(7)
+
+#define AS3722_ADC_MSB_VAL_MASK 0x7F
+#define AS3722_ADC_LSB_VAL_MASK 0x07
+
+#define AS3722_ADC0_CONV_START BIT(7)
+#define AS3722_ADC0_CONV_NOTREADY BIT(7)
+#define AS3722_ADC0_SOURCE_SELECT_MASK 0x1F
+
+#define AS3722_ADC1_CONV_START BIT(7)
+#define AS3722_ADC1_CONV_NOTREADY BIT(7)
+#define AS3722_ADC1_SOURCE_SELECT_MASK 0x1F
+
+/* GPIO modes */
+#define AS3722_GPIO_MODE_MASK 0x07
+#define AS3722_GPIO_MODE_INPUT 0x00
+#define AS3722_GPIO_MODE_OUTPUT_VDDH 0x01
+#define AS3722_GPIO_MODE_IO_OPEN_DRAIN 0x02
+#define AS3722_GPIO_MODE_ADC_IN 0x03
+#define AS3722_GPIO_MODE_INPUT_PULL_UP 0x04
+#define AS3722_GPIO_MODE_INPUT_PULL_DOWN 0x05
+#define AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP 0x06
+#define AS3722_GPIO_MODE_OUTPUT_VDDL 0x07
+#define AS3722_GPIO_MODE_VAL(n) ((n) & AS3722_GPIO_MODE_MASK)
+
+#define AS3722_GPIO_INV BIT(7)
+#define AS3722_GPIO_IOSF_MASK 0x78
+#define AS3722_GPIO_IOSF_VAL(n) (((n) & 0xF) << 3)
+#define AS3722_GPIO_IOSF_NORMAL AS3722_GPIO_IOSF_VAL(0)
+#define AS3722_GPIO_IOSF_INTERRUPT_OUT AS3722_GPIO_IOSF_VAL(1)
+#define AS3722_GPIO_IOSF_VSUP_LOW_OUT AS3722_GPIO_IOSF_VAL(2)
+#define AS3722_GPIO_IOSF_GPIO_INTERRUPT_IN AS3722_GPIO_IOSF_VAL(3)
+#define AS3722_GPIO_IOSF_ISINK_PWM_IN AS3722_GPIO_IOSF_VAL(4)
+#define AS3722_GPIO_IOSF_VOLTAGE_STBY AS3722_GPIO_IOSF_VAL(5)
+#define AS3722_GPIO_IOSF_PWR_GOOD_OUT AS3722_GPIO_IOSF_VAL(7)
+#define AS3722_GPIO_IOSF_Q32K_OUT AS3722_GPIO_IOSF_VAL(8)
+#define AS3722_GPIO_IOSF_WATCHDOG_IN AS3722_GPIO_IOSF_VAL(9)
+#define AS3722_GPIO_IOSF_SOFT_RESET_IN AS3722_GPIO_IOSF_VAL(11)
+#define AS3722_GPIO_IOSF_PWM_OUT AS3722_GPIO_IOSF_VAL(12)
+#define AS3722_GPIO_IOSF_VSUP_LOW_DEB_OUT AS3722_GPIO_IOSF_VAL(13)
+#define AS3722_GPIO_IOSF_SD6_LOW_VOLT_LOW AS3722_GPIO_IOSF_VAL(14)
+
+#define AS3722_GPIOn_SIGNAL(n) BIT(n)
+#define AS3722_GPIOn_CONTROL_REG(n) (AS3722_GPIO0_CONTROL_REG + n)
+#define AS3722_I2C_PULL_UP BIT(4)
+#define AS3722_INT_PULL_UP BIT(5)
+
+#define AS3722_RTC_REP_WAKEUP_EN BIT(0)
+#define AS3722_RTC_ALARM_WAKEUP_EN BIT(1)
+#define AS3722_RTC_ON BIT(2)
+#define AS3722_RTC_IRQMODE BIT(3)
+#define AS3722_RTC_CLK32K_OUT_EN BIT(5)
+
+#define AS3722_WATCHDOG_TIMER_MAX 0x7F
+#define AS3722_WATCHDOG_ON BIT(0)
+#define AS3722_WATCHDOG_SW_SIG BIT(0)
+
+#define AS3722_EXT_CONTROL_ENABLE1 0x1
+#define AS3722_EXT_CONTROL_ENABLE2 0x2
+#define AS3722_EXT_CONTROL_ENABLE3 0x3
+
+/* Interrupt IDs */
+enum as3722_irq {
+ AS3722_IRQ_LID,
+ AS3722_IRQ_ACOK,
+ AS3722_IRQ_ENABLE1,
+ AS3722_IRQ_OCCUR_ALARM_SD0,
+ AS3722_IRQ_ONKEY_LONG_PRESS,
+ AS3722_IRQ_ONKEY,
+ AS3722_IRQ_OVTMP,
+ AS3722_IRQ_LOWBAT,
+ AS3722_IRQ_SD0_LV,
+ AS3722_IRQ_SD1_LV,
+ AS3722_IRQ_SD2_LV,
+ AS3722_IRQ_PWM1_OV_PROT,
+ AS3722_IRQ_PWM2_OV_PROT,
+ AS3722_IRQ_ENABLE2,
+ AS3722_IRQ_SD6_LV,
+ AS3722_IRQ_RTC_REP,
+ AS3722_IRQ_RTC_ALARM,
+ AS3722_IRQ_GPIO1,
+ AS3722_IRQ_GPIO2,
+ AS3722_IRQ_GPIO3,
+ AS3722_IRQ_GPIO4,
+ AS3722_IRQ_GPIO5,
+ AS3722_IRQ_WATCHDOG,
+ AS3722_IRQ_ENABLE3,
+ AS3722_IRQ_TEMP_SD0_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD1_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD2_SHUTDOWN,
+ AS3722_IRQ_TEMP_SD0_ALARM,
+ AS3722_IRQ_TEMP_SD1_ALARM,
+ AS3722_IRQ_TEMP_SD6_ALARM,
+ AS3722_IRQ_OCCUR_ALARM_SD6,
+ AS3722_IRQ_ADC,
+ AS3722_IRQ_MAX,
+};
+
+struct as3722 {
+ struct device *dev;
+ struct regmap *regmap;
+ int chip_irq;
+ unsigned long irq_flags;
+ bool en_intern_int_pullup;
+ bool en_intern_i2c_pullup;
+ struct regmap_irq_chip_data *irq_data;
+};
+
+static inline int as3722_read(struct as3722 *as3722, u32 reg, u32 *dest)
+{
+ return regmap_read(as3722->regmap, reg, dest);
+}
+
+static inline int as3722_write(struct as3722 *as3722, u32 reg, u32 value)
+{
+ return regmap_write(as3722->regmap, reg, value);
+}
+
+static inline int as3722_block_read(struct as3722 *as3722, u32 reg,
+ int count, u8 *buf)
+{
+ return regmap_bulk_read(as3722->regmap, reg, buf, count);
+}
+
+static inline int as3722_block_write(struct as3722 *as3722, u32 reg,
+ int count, u8 *data)
+{
+ return regmap_bulk_write(as3722->regmap, reg, data, count);
+}
+
+static inline int as3722_update_bits(struct as3722 *as3722, u32 reg,
+ u32 mask, u8 val)
+{
+ return regmap_update_bits(as3722->regmap, reg, mask, val);
+}
+
+static inline int as3722_irq_get_virq(struct as3722 *as3722, int irq)
+{
+ return regmap_irq_get_virq(as3722->irq_data, irq);
+}
+#endif /* __LINUX_MFD_AS3722_H__ */
--
1.7.1.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC
2013-09-20 12:30 ` [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC Laxman Dewangan
@ 2013-09-20 12:39 ` Lee Jones
2013-09-20 15:55 ` Mark Brown
0 siblings, 1 reply; 15+ messages in thread
From: Lee Jones @ 2013-09-20 12:39 UTC (permalink / raw)
To: Laxman Dewangan
Cc: sameo, broonie, linus.walleij, akpm, devicetree, linux-doc,
linux-kernel, linux-gpio, rtc-linux, rob.herring, mark.rutland,
pawel.moll, swarren, rob, ijc+devicetree, grant.likely,
Florian Lobmaier
> The AMS AS3722 is a compact system PMU suitable for mobile phones,
> tablets etc. It has 4 DC/DC step-down regulators, 3 DC/DC step-down
> controller, 11 LDOs, RTC, automatic battery, temperature and
> over-current monitoring, 8 GPIOs, ADC and wathdog.
>
> Add mfd core driver for the AS3722 to support core functionality.
<snip>
> +Example:
> +--------
> +ams3722 {
> + compatible = "ams,as3722";
> + reg = <0x48>
> +
> + interrupt-parent = <&intc>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + gpio-controller;
> + #gpio-cells = <2>;
> +
> + gpio {
> + /*
> + * GPIO related properties
> + * Refer document bindings/gpio/gpio-as3722.txt
> + */
> + };
> +
> + regulators {
> + /*
> + * Regulator related properties
> + * Refer document bindings/regulator/as3722-regulator.txt
> + */
> + };
> +};
I still don't think this is the way to go. If you can justify that
these sub-devices require their own node, then they should have a
compatible string. The MFD sub-system will then populate the of_node
for you and you can use/request them in the normal way.
To reiterate, Mark's issue was not the existence of the compatible
string, it was with the existence of the child nodes in general.
Personally I think the device should have sub-nodes. It's how we
dealt with our DB8500 and AB8500 and it works very well. At the end of
the day these all-in-one chips do house very different devices. I see
no harm in describing them that way. I'm sure other OSes can make use
of the sub-devices in similar ways.
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC
2013-09-20 12:39 ` Lee Jones
@ 2013-09-20 15:55 ` Mark Brown
0 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-09-20 15:55 UTC (permalink / raw)
To: Lee Jones
Cc: Laxman Dewangan, sameo, linus.walleij, akpm, devicetree,
linux-doc, linux-kernel, linux-gpio, rtc-linux, rob.herring,
mark.rutland, pawel.moll, swarren, rob, ijc+devicetree,
grant.likely, Florian Lobmaier
[-- Attachment #1: Type: text/plain, Size: 729 bytes --]
On Fri, Sep 20, 2013 at 01:39:30PM +0100, Lee Jones wrote:
> Personally I think the device should have sub-nodes. It's how we
> dealt with our DB8500 and AB8500 and it works very well. At the end of
> the day these all-in-one chips do house very different devices. I see
> no harm in describing them that way. I'm sure other OSes can make use
> of the sub-devices in similar ways.
For some bits of the device it makes sense - the regulators are a good
example with this device - but for others it's more questionable if the
Linux division of the device into subsystems is general enough (or even
static for Linux - like this one where there's the 32kHz clock being
handled by the RTC driver binding in the last patch posted).
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver
2013-09-20 12:30 [PATCH V2 0/5] Add AMS AS3722 mfd, GPIO, regulator and RTC driver Laxman Dewangan
2013-09-20 12:30 ` [PATCH V2 1/5] regmap: add helper macro to set min/max range of register Laxman Dewangan
2013-09-20 12:30 ` [PATCH V2 2/5] mfd: add support for AMS AS3722 PMIC Laxman Dewangan
@ 2013-09-20 12:30 ` Laxman Dewangan
2013-09-23 8:06 ` [rtc-linux] " Linus Walleij
2013-09-20 12:30 ` [PATCH V2 4/5] regulator: as3722: add regulator driver for AMS AS3722 Laxman Dewangan
2013-09-20 12:30 ` [PATCH V2 5/5] drivers/rtc/rtc-as3722: add RTC driver Laxman Dewangan
4 siblings, 1 reply; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-20 12:30 UTC (permalink / raw)
To: lee.jones, sameo, broonie, linus.walleij, akpm
Cc: devicetree, linux-doc, linux-kernel, linux-gpio, rtc-linux,
rob.herring, mark.rutland, pawel.moll, swarren, rob,
ijc+devicetree, grant.likely, Laxman Dewangan, Florian Lobmaier
The AS3722 is a compact system PMU suitable for mobile phones, tablets etc.
Add a driver to support accessing the 8 GPIOs found on the AMS AS3722
PMIC using gpiolib.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
---
Changes from V1:
- Nit cleanups in driver and use module_platform_driver.
.../devicetree/bindings/gpio/gpio-as3722.txt | 62 +++
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/gpio-as3722.c | 435 ++++++++++++++++++++
4 files changed, 504 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-as3722.txt
create mode 100644 drivers/gpio/gpio-as3722.c
diff --git a/Documentation/devicetree/bindings/gpio/gpio-as3722.txt b/Documentation/devicetree/bindings/gpio/gpio-as3722.txt
new file mode 100644
index 0000000..8d46dd3
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-as3722.txt
@@ -0,0 +1,62 @@
+GPIO of AMS AS3722 PMIC.
+
+Name of GPIO subnode should be "gpio".
+Required properties:
+--------------------
+- #address-cells: Number of address of the sub node of this node. Must be 1.
+- #size-cells: Size of addess cells. Must be 1.
+
+Sub node:
+--------
+The sub nodes provides the configuration of each GPIO pins. The properties of the
+nodes are as follows:
+
+Required subnode properties:
+---------------------------
+reg: The GPIO number on which the properties need to be applied.
+
+Optional subnode properties:
+---------------------------
+bias-pull-up: The Pull-up for the pin to be enable.
+bias-pull-down: Pull down of the pins to be enable.
+bias-high-impedance: High impedance of the pin to be enable.
+open-drain: Pin is open drain type.
+function: IO functionality of the pins. The valid options are:
+ gpio, intrrupt-output, vsup-vbat-low-undeb, interrupt-input,
+ pwm-input, voltage-stby, oc-powergood-sd0, powergood-output,
+ clk32k-output, watchdog-input, soft-reset-input, pwm-output,
+ vsup-vbat-low-deb, oc-powergood-sd6
+ Missing the function property will set the pin in GPIO mode.
+
+ams,enable-gpio-invert: Enable invert of the signal on GPIO pin.
+
+Example:
+ ams3722:: ams3722 {
+ compatible = "ams,as3722";
+ ...
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpio@0 {
+ reg = <0>;
+ bias-pull-down;
+ };
+
+ gpio@1 {
+ reg = <1>;
+ bias-pull-up;
+ ams,enable-gpio-invert;
+ };
+
+ ...
+ gpio@5 {
+ reg = <5>;
+ unction = "clk32k-output";
+ };
+ ...
+ };
+ ...
+ };
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index b6ed304..544a612 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -368,6 +368,12 @@ config GPIO_ARIZONA
help
Support for GPIOs on Wolfson Arizona class devices.
+config GPIO_AS3722
+ bool "AMS AS3722 PMICs GPIO"
+ depends on MFD_AS3722
+ help
+ Select this option to enable GPIO driver for the AMS AS3722 PMIC.
+
config GPIO_MAX7300
tristate "Maxim MAX7300 GPIO expander"
depends on I2C
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 98e23eb..d1715a0 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o
obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o
obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o
obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o
+obj-$(CONFIG_GPIO_AS3722) += gpio-as3722.o
obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o
obj-$(CONFIG_GPIO_CLPS711X) += gpio-clps711x.o
obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o
diff --git a/drivers/gpio/gpio-as3722.c b/drivers/gpio/gpio-as3722.c
new file mode 100644
index 0000000..44b5a75
--- /dev/null
+++ b/drivers/gpio/gpio-as3722.c
@@ -0,0 +1,435 @@
+/*
+ * gpiolib support for ams AS3722 PMICs
+ *
+ * Copyright (C) 2013 ams AG
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/gpio.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#define AS3722_MAX_GPIO 8
+#define AS3722_GPIO_MODE_PROP_PULL_UP 0x1
+#define AS3722_GPIO_MODE_PROP_PULL_DOWN 0x2
+#define AS3722_GPIO_MODE_PROP_HIGH_IMPED 0x4
+#define AS3722_GPIO_MODE_PROP_OPEN_DRAIN 0x8
+
+struct as3722_gpio_control {
+ bool enable_gpio_invert;
+ unsigned mode_prop;
+ int io_function;
+};
+
+struct as3722_gpio {
+ struct gpio_chip gpio_chip;
+ struct device *dev;
+ struct as3722 *as3722;
+ struct as3722_gpio_control gpio_control[AS3722_MAX_GPIO];
+};
+
+struct as3722_gpio_mode_property {
+ const char *prop;
+ u32 prop_val;
+};
+
+static char const *as3722_gpio_iosf[] = {
+ "gpio",
+ "intrrupt-output",
+ "vsup-vbat-low-undeb",
+ "interrupt-input",
+ "pwm-input",
+ "voltage-stby",
+ "oc-powergood-sd0",
+ "powergood-output",
+ "clk32k-output",
+ "watchdog-input",
+ "unused",
+ "soft-reset-input",
+ "pwm-output",
+ "vsup-vbat-low-deb",
+ "oc-powergood-sd6",
+ "unused1"
+};
+
+static const struct as3722_gpio_mode_property const as3722_gpio_mode_props[] = {
+ {
+ .prop = "bias-pull-up",
+ .prop_val = AS3722_GPIO_MODE_PROP_PULL_UP,
+ }, {
+ .prop = "bias-pull-down",
+ .prop_val = AS3722_GPIO_MODE_PROP_PULL_DOWN,
+ }, {
+ .prop = "bias-high-impedance",
+ .prop_val = AS3722_GPIO_MODE_PROP_HIGH_IMPED,
+ }, {
+ .prop = "open-drain",
+ .prop_val = AS3722_GPIO_MODE_PROP_OPEN_DRAIN,
+ },
+};
+
+static int as3722_gpio_get_mode(unsigned gpio_mode_prop, bool input)
+{
+ if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_HIGH_IMPED)
+ return -EINVAL;
+
+ if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_OPEN_DRAIN) {
+ if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_PULL_UP)
+ return AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP;
+ return AS3722_GPIO_MODE_IO_OPEN_DRAIN;
+ }
+ if (input) {
+ if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_PULL_UP)
+ return AS3722_GPIO_MODE_INPUT_PULL_UP;
+ else if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_PULL_DOWN)
+ return AS3722_GPIO_MODE_INPUT_PULL_DOWN;
+ return AS3722_GPIO_MODE_INPUT;
+ }
+ if (gpio_mode_prop & AS3722_GPIO_MODE_PROP_PULL_DOWN)
+ return AS3722_GPIO_MODE_OUTPUT_VDDL;
+ return AS3722_GPIO_MODE_OUTPUT_VDDH;
+}
+
+static inline struct as3722_gpio *to_as3722_gpio(struct gpio_chip *chip)
+{
+ return container_of(chip, struct as3722_gpio, gpio_chip);
+}
+
+static int as3722_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+ struct as3722 *as3722 = as3722_gpio->as3722;
+ int ret;
+ u32 reg;
+ u32 control;
+ u32 val;
+ int mode;
+ int invert_enable;
+
+ ret = as3722_read(as3722, AS3722_GPIOn_CONTROL_REG(offset), &control);
+ if (ret < 0) {
+ dev_err(as3722_gpio->dev,
+ "GPIO_CONTROL%d_REG read failed: %d\n", offset, ret);
+ return ret;
+ }
+
+ invert_enable = !!(control & AS3722_GPIO_INV);
+ mode = control & AS3722_GPIO_MODE_MASK;
+ switch (mode) {
+ case AS3722_GPIO_MODE_INPUT:
+ case AS3722_GPIO_MODE_INPUT_PULL_UP:
+ case AS3722_GPIO_MODE_INPUT_PULL_DOWN:
+ case AS3722_GPIO_MODE_IO_OPEN_DRAIN:
+ case AS3722_GPIO_MODE_IO_OPEN_DRAIN_PULL_UP:
+ reg = AS3722_GPIO_SIGNAL_IN_REG;
+ break;
+ case AS3722_GPIO_MODE_OUTPUT_VDDH:
+ case AS3722_GPIO_MODE_OUTPUT_VDDL:
+ reg = AS3722_GPIO_SIGNAL_OUT_REG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = as3722_read(as3722, reg, &val);
+ if (ret < 0) {
+ dev_err(as3722_gpio->dev,
+ "GPIO_SIGNAL_IN_REG read failed: %d\n", ret);
+ return ret;
+ }
+
+ val = !!(val & AS3722_GPIOn_SIGNAL(offset));
+ return (invert_enable) ? !val : val;
+}
+
+static void as3722_gpio_set(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+ struct as3722 *as3722 = as3722_gpio->as3722;
+ int en_invert = as3722_gpio->gpio_control[offset].enable_gpio_invert;
+ u32 val;
+ int ret;
+
+ if (value)
+ val = (en_invert) ? 0 : AS3722_GPIOn_SIGNAL(offset);
+ else
+ val = (en_invert) ? AS3722_GPIOn_SIGNAL(offset) : 0;
+
+ ret = as3722_update_bits(as3722, AS3722_GPIO_SIGNAL_OUT_REG,
+ AS3722_GPIOn_SIGNAL(offset), val);
+ if (ret < 0)
+ dev_err(as3722_gpio->dev,
+ "GPIO_SIGNAL_OUT_REG update failed: %d\n", ret);
+}
+
+static int as3722_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+ struct as3722 *as3722 = as3722_gpio->as3722;
+ int mode;
+
+ mode = as3722_gpio_get_mode(as3722_gpio->gpio_control[offset].mode_prop,
+ true);
+ if (mode < 0) {
+ dev_err(as3722_gpio->dev,
+ "Input direction for GPIO %d not supported\n", offset);
+ return mode;
+ }
+
+ if (as3722_gpio->gpio_control[offset].enable_gpio_invert)
+ mode |= AS3722_GPIO_INV;
+
+ return as3722_write(as3722, AS3722_GPIOn_CONTROL_REG(offset), mode);
+}
+
+static int as3722_gpio_direction_output(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+ struct as3722 *as3722 = as3722_gpio->as3722;
+ int mode;
+
+ mode = as3722_gpio_get_mode(as3722_gpio->gpio_control[offset].mode_prop,
+ false);
+ if (mode < 0) {
+ dev_err(as3722_gpio->dev,
+ "Output direction for GPIO %d not supported\n", offset);
+ return mode;
+ }
+
+ as3722_gpio_set(chip, offset, value);
+ if (as3722_gpio->gpio_control[offset].enable_gpio_invert)
+ mode |= AS3722_GPIO_INV;
+ return as3722_write(as3722, AS3722_GPIOn_CONTROL_REG(offset), mode);
+}
+
+static int as3722_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+
+ return as3722_irq_get_virq(as3722_gpio->as3722, offset);
+}
+
+static int as3722_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct as3722_gpio *as3722_gpio = to_as3722_gpio(chip);
+
+ if (as3722_gpio->gpio_control[offset].io_function)
+ return -EBUSY;
+ return 0;
+}
+
+static int as3722_gpio_set_config(struct as3722_gpio *as3722_gpio,
+ unsigned int gpio)
+{
+ struct as3722 *as3722 = as3722_gpio->as3722;
+ int ret = 0;
+ u8 val = 0;
+
+ val = AS3722_GPIO_IOSF_VAL(as3722_gpio->gpio_control[gpio].io_function);
+ ret = as3722_update_bits(as3722, AS3722_GPIOn_CONTROL_REG(gpio),
+ AS3722_GPIO_IOSF_MASK, val);
+ if (ret < 0)
+ dev_err(as3722->dev,
+ "GPIO%d_CTRL_REG update failed %d\n", gpio, ret);
+ return ret;
+}
+
+static int as3722_gpio_init_configs(struct as3722_gpio *as3722_gpio)
+{
+ int ret;
+ unsigned int i;
+
+ for (i = 0; i < AS3722_MAX_GPIO; i++) {
+ if (!as3722_gpio->gpio_control[i].io_function)
+ continue;
+
+ ret = as3722_gpio_set_config(as3722_gpio, i);
+ if (ret < 0) {
+ dev_err(as3722_gpio->dev,
+ "GPIO %d config failed %d\n", i, ret);
+ return ret;
+ }
+ }
+ return 0;
+}
+
+static int as3722_gpio_dt_subnode(struct as3722_gpio *as3722_gpio,
+ struct device_node *child, int gpio)
+{
+ const char *iosf;
+ int i;
+ int ret;
+ bool found;
+ unsigned prop_val = 0;
+
+ for (i = 0; i < ARRAY_SIZE(as3722_gpio_mode_props); ++i) {
+ found = of_property_read_bool(child,
+ as3722_gpio_mode_props[i].prop);
+ if (found)
+ prop_val |= as3722_gpio_mode_props[i].prop_val;
+ }
+ as3722_gpio->gpio_control[gpio].mode_prop = prop_val;
+
+ ret = of_property_read_string(child, "function", &iosf);
+ if (!ret) {
+ found = false;
+ for (i = 0; i < ARRAY_SIZE(as3722_gpio_iosf); ++i) {
+ if (!strcmp(as3722_gpio_iosf[i], iosf)) {
+ found = true;
+ break;
+ }
+ }
+ if (found)
+ as3722_gpio->gpio_control[gpio].io_function = i;
+ else
+ dev_warn(as3722_gpio->dev,
+ "Child %s io function is invalid\n",
+ child->name);
+ }
+
+ as3722_gpio->gpio_control[gpio].enable_gpio_invert =
+ of_property_read_bool(child, "ams,enable-gpio-invert");
+ return 0;
+}
+
+static int as3722_get_gpio_dt_data(struct platform_device *pdev,
+ struct as3722_gpio *as3722_gpio)
+{
+ struct device_node *np;
+ struct device_node *child;
+ unsigned int gpio;
+ int ret;
+
+ np = of_get_child_by_name(pdev->dev.parent->of_node, "gpio");
+ if (!np) {
+ dev_err(&pdev->dev, "Device is not having gpio node\n");
+ return -ENODEV;
+ }
+
+ for_each_child_of_node(np, child) {
+ ret = of_property_read_u32(child, "reg", &gpio);
+ if (ret < 0) {
+ dev_warn(&pdev->dev,
+ "reg property not present in node %s\n",
+ child->name);
+ continue;
+ }
+ if (gpio >= AS3722_MAX_GPIO) {
+ dev_warn(&pdev->dev,
+ "GPIO number %d is more than supported\n", gpio);
+ continue;
+ }
+ ret = as3722_gpio_dt_subnode(as3722_gpio, child, gpio);
+ if (ret < 0)
+ dev_warn(&pdev->dev, "gpio %s node parse failed: %d\n",
+ child->name, ret);
+ }
+ return 0;
+}
+
+static const struct gpio_chip as3722_gpio_chip = {
+ .label = "as3722-gpio",
+ .owner = THIS_MODULE,
+ .direction_input = as3722_gpio_direction_input,
+ .get = as3722_gpio_get,
+ .direction_output = as3722_gpio_direction_output,
+ .set = as3722_gpio_set,
+ .to_irq = as3722_gpio_to_irq,
+ .request = as3722_gpio_request,
+ .can_sleep = 1,
+ .ngpio = AS3722_MAX_GPIO,
+ .base = -1,
+};
+
+static int as3722_gpio_probe(struct platform_device *pdev)
+{
+ struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent);
+ struct as3722_gpio *as3722_gpio;
+ int ret;
+
+ as3722_gpio = devm_kzalloc(&pdev->dev, sizeof(*as3722_gpio),
+ GFP_KERNEL);
+ if (!as3722_gpio)
+ return -ENOMEM;
+
+ ret = as3722_get_gpio_dt_data(pdev, as3722_gpio);
+ if (ret < 0)
+ return ret;
+
+ as3722_gpio->as3722 = as3722;
+ as3722_gpio->dev = &pdev->dev;
+ as3722_gpio->gpio_chip = as3722_gpio_chip;
+ as3722_gpio->gpio_chip.dev = &pdev->dev;
+ as3722_gpio->gpio_chip.of_node = pdev->dev.parent->of_node;
+
+ platform_set_drvdata(pdev, as3722_gpio);
+
+ ret = as3722_gpio_init_configs(as3722_gpio);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpio_init_regs failed\n");
+ return ret;
+ }
+
+ ret = gpiochip_add(&as3722_gpio->gpio_chip);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Could not register gpiochip, %d\n",
+ ret);
+ return ret;
+ }
+ return 0;
+}
+
+static int as3722_gpio_remove(struct platform_device *pdev)
+{
+ struct as3722_gpio *as3722_gpio = platform_get_drvdata(pdev);
+
+ return gpiochip_remove(&as3722_gpio->gpio_chip);
+}
+
+static const struct of_device_id of_as3722_gpio_match[] = {
+ { .compatible = "ams,as3722-gpio", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_as3722_gpio_match);
+
+static struct platform_driver as3722_gpio_driver = {
+ .driver = {
+ .name = "as3722-gpio",
+ .owner = THIS_MODULE,
+ .of_match_table = of_as3722_gpio_match,
+ },
+ .probe = as3722_gpio_probe,
+ .remove = as3722_gpio_remove,
+};
+
+module_platform_driver(as3722_gpio_driver);
+
+MODULE_ALIAS("platform:as3722-gpio");
+MODULE_DESCRIPTION("GPIO interface for AS3722 PMICs");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL");
--
1.7.1.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [rtc-linux] [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver
2013-09-20 12:30 ` [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver Laxman Dewangan
@ 2013-09-23 8:06 ` Linus Walleij
2013-09-23 8:55 ` Laxman Dewangan
0 siblings, 1 reply; 15+ messages in thread
From: Linus Walleij @ 2013-09-23 8:06 UTC (permalink / raw)
To: rtc-linux
Cc: Lee Jones, Samuel Ortiz, Mark Brown, Andrew Morton,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-gpio@vger.kernel.org,
Rob Herring, Mark Rutland, Pawel Moll, Stephen Warren,
Rob Landley, ijc+devicetree, Grant Likely, Laxman Dewangan,
Florian Lobmaier
On Fri, Sep 20, 2013 at 2:30 PM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> The AS3722 is a compact system PMU suitable for mobile phones, tablets etc.
>
> Add a driver to support accessing the 8 GPIOs found on the AMS AS3722
> PMIC using gpiolib.
>
> Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
> Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
OK...
> +Required subnode properties:
> +---------------------------
> +reg: The GPIO number on which the properties need to be applied.
> +
> +Optional subnode properties:
> +---------------------------
> +bias-pull-up: The Pull-up for the pin to be enable.
> +bias-pull-down: Pull down of the pins to be enable.
> +bias-high-impedance: High impedance of the pin to be enable.
> +open-drain: Pin is open drain type.
> +function: IO functionality of the pins. The valid options are:
> + gpio, intrrupt-output, vsup-vbat-low-undeb, interrupt-input,
> + pwm-input, voltage-stby, oc-powergood-sd0, powergood-output,
> + clk32k-output, watchdog-input, soft-reset-input, pwm-output,
> + vsup-vbat-low-deb, oc-powergood-sd6
> + Missing the function property will set the pin in GPIO mode.
This is pin control. Do not try to shoehorn pin control drivers into
the GPIO subsystem. Take a good day off, read through
Documentation/pinctrl.txt and come back with a thoroughly rewritten
driver in drivers/pinctrl/pinctrl-as3722.c.
We already have generic device tree bindings for all of the above
properties, and a library for generic pin config in the pin control
subsystem to handle them. Look at recent drivers for
inspiration.
> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
Move this driver to the pinctrl subsystem.
> index b6ed304..544a612 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -368,6 +368,12 @@ config GPIO_ARIZONA
> help
> Support for GPIOs on Wolfson Arizona class devices.
>
> +config GPIO_AS3722
> + bool "AMS AS3722 PMICs GPIO"
> + depends on MFD_AS3722
> + help
> + Select this option to enable GPIO driver for the AMS AS3722 PMIC.
It should
select PINMUX
select GENERIC_PINCONF
> +static char const *as3722_gpio_iosf[] = {
> + "gpio",
> + "intrrupt-output",
intrrupt?
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 15+ messages in thread* Re: [rtc-linux] [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver
2013-09-23 8:06 ` [rtc-linux] " Linus Walleij
@ 2013-09-23 8:55 ` Laxman Dewangan
2013-09-23 9:26 ` Linus Walleij
0 siblings, 1 reply; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-23 8:55 UTC (permalink / raw)
To: Linus Walleij
Cc: rtc-linux@googlegroups.com, Lee Jones, Samuel Ortiz, Mark Brown,
Andrew Morton, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, Rob Herring, Mark Rutland, Pawel Moll,
Stephen Warren, Rob Landley, ijc+devicetree@hellion.org.uk,
Grant Likely, Florian Lobmaier
On Monday 23 September 2013 01:36 PM, Linus Walleij wrote:
> On Fri, Sep 20, 2013 at 2:30 PM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
>
>> +Required subnode properties:
>> +---------------------------
>> +reg: The GPIO number on which the properties need to be applied.
>> +
>> +Optional subnode properties:
>> +---------------------------
>> +bias-pull-up: The Pull-up for the pin to be enable.
>> +bias-pull-down: Pull down of the pins to be enable.
>> +bias-high-impedance: High impedance of the pin to be enable.
>> +open-drain: Pin is open drain type.
>> +function: IO functionality of the pins. The valid options are:
>> + gpio, intrrupt-output, vsup-vbat-low-undeb, interrupt-input,
>> + pwm-input, voltage-stby, oc-powergood-sd0, powergood-output,
>> + clk32k-output, watchdog-input, soft-reset-input, pwm-output,
>> + vsup-vbat-low-deb, oc-powergood-sd6
>> + Missing the function property will set the pin in GPIO mode.
> This is pin control. Do not try to shoehorn pin control drivers into
> the GPIO subsystem. Take a good day off, read through
> Documentation/pinctrl.txt and come back with a thoroughly rewritten
> driver in drivers/pinctrl/pinctrl-as3722.c.
>
> We already have generic device tree bindings for all of the above
> properties, and a library for generic pin config in the pin control
> subsystem to handle them. Look at recent drivers for
> inspiration.
>
Yes, the appropriate location is pin control for pull up/down etc
configuration but with this device, the actual issue is with the way it
is require to configure the pull up/down and input/output of the pin.
There is no separate bits for pull up/down and direction and it is
clubbed together. The register's bits are defined as:
Selects the GPIO mode (I, I/O, Tri, Pulls) (BIT 2:0)
0 : Input
1 : Output (push and pull) VSUP_GPIO
2 : Output/Input (open drain, only NMOS is active)
3 : ADC input (Tristate)
4 : Input with pull-up to VDD_GPIO_lv
5 : Input with pull-down
6 : Output/Input open drain (nmos) with pull-up to VDD_GPIO_lv,
7 : Output (push and pull) VDD_GPIO_lv
So I can not actually configure the pull up/down, open drain and
direction independently until every thing is known.
Direction come from gpio driver but pull up/down and open drain
configuration come from the pin control.
And this is only the reason to make all configuration in single driver.
^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: [rtc-linux] [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver
2013-09-23 8:55 ` Laxman Dewangan
@ 2013-09-23 9:26 ` Linus Walleij
[not found] ` <CACRpkdYVTdh3+ayy96D4=iNO6ZASfTfeQOHF9vdoPjfLDCtB5Q-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
0 siblings, 1 reply; 15+ messages in thread
From: Linus Walleij @ 2013-09-23 9:26 UTC (permalink / raw)
To: Laxman Dewangan
Cc: rtc-linux@googlegroups.com, Lee Jones, Samuel Ortiz, Mark Brown,
Andrew Morton, devicetree@vger.kernel.org,
linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org, Rob Herring, Mark Rutland, Pawel Moll,
Stephen Warren, Rob Landley, ijc+devicetree@hellion.org.uk,
Grant Likely, Florian Lobmaier
On Mon, Sep 23, 2013 at 10:55 AM, Laxman Dewangan <ldewangan@nvidia.com> wrote:
> On Monday 23 September 2013 01:36 PM, Linus Walleij wrote:
>> This is pin control. Do not try to shoehorn pin control drivers into
>> the GPIO subsystem. Take a good day off, read through
>> Documentation/pinctrl.txt and come back with a thoroughly rewritten
>> driver in drivers/pinctrl/pinctrl-as3722.c.
(...)
>
> Yes, the appropriate location is pin control for pull up/down etc
> configuration but with this device, the actual issue is with the way it is
> require to configure the pull up/down and input/output of the pin. There is
> no separate bits for pull up/down and direction and it is clubbed together.
> The register's bits are defined as:
>
> Selects the GPIO mode (I, I/O, Tri, Pulls) (BIT 2:0)
> 0 : Input
> 1 : Output (push and pull) VSUP_GPIO
> 2 : Output/Input (open drain, only NMOS is active)
> 3 : ADC input (Tristate)
> 4 : Input with pull-up to VDD_GPIO_lv
> 5 : Input with pull-down
> 6 : Output/Input open drain (nmos) with pull-up to VDD_GPIO_lv,
> 7 : Output (push and pull) VDD_GPIO_lv
>
> So I can not actually configure the pull up/down, open drain and direction
> independently until every thing is known.
> Direction come from gpio driver but pull up/down and open drain
> configuration come from the pin control.
> And this is only the reason to make all configuration in single driver.
This is nothing special. Create a single combined GPIO and
pin control driver using the pin control framework and device
tree bindings.
It is the responsibility of the driver to say "no" to things the
hardware cannot handle, and it is the responsibility of the
driver to track the state of the hardware.
The fact that hardware engineers have attempted to be
"helpful" by supplying 8 predefined configuration states
does not change anything.
Also it is obviously soon a pin control driver since your
DT binding contains this:
+function: IO functionality of the pins. The valid options are:
+ gpio, intrrupt-output, vsup-vbat-low-undeb, interrupt-input,
+ pwm-input, voltage-stby, oc-powergood-sd0, powergood-output,
+ clk32k-output, watchdog-input, soft-reset-input, pwm-output,
+ vsup-vbat-low-deb, oc-powergood-sd6
+ Missing the function property will set the pin in GPIO mode.
Which shall be implemented using the pinmux portions
of pin control.
Yours,
Linus Walleij
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH V2 4/5] regulator: as3722: add regulator driver for AMS AS3722
2013-09-20 12:30 [PATCH V2 0/5] Add AMS AS3722 mfd, GPIO, regulator and RTC driver Laxman Dewangan
` (2 preceding siblings ...)
2013-09-20 12:30 ` [PATCH V2 3/5] gpio: add support for AMS AS3722 gpio driver Laxman Dewangan
@ 2013-09-20 12:30 ` Laxman Dewangan
2013-09-20 17:08 ` Mark Brown
2013-09-20 12:30 ` [PATCH V2 5/5] drivers/rtc/rtc-as3722: add RTC driver Laxman Dewangan
4 siblings, 1 reply; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-20 12:30 UTC (permalink / raw)
To: lee.jones, sameo, broonie, linus.walleij, akpm
Cc: devicetree, linux-doc, linux-kernel, linux-gpio, rtc-linux,
rob.herring, mark.rutland, pawel.moll, swarren, rob,
ijc+devicetree, grant.likely, Laxman Dewangan, Florian Lobmaier
The AMS AS3722 is a compact system PMU suitable for mobile phones,
tablets etc. It has 4 DCDC step down regulators, 3 DCDC step down
controller, 11 LDOs.
Add a driver to support accessing the DCDC/LDOs found on the AMS
AS3722 PMIC using regulators.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
---
Changes from V1:
- Add code to get regulator node handle.
- Nit cleanups in driver and use module_platform_driver.
- Use linear_range and added regulator_map_* on regulators.
- Move OC configuration to regulator_current limit setting.
.../bindings/regulator/as3722-regulator.txt | 91 ++
drivers/regulator/Kconfig | 8 +
drivers/regulator/Makefile | 1 +
drivers/regulator/as3722-regulator.c | 917 ++++++++++++++++++++
4 files changed, 1017 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/regulator/as3722-regulator.txt
create mode 100644 drivers/regulator/as3722-regulator.c
diff --git a/Documentation/devicetree/bindings/regulator/as3722-regulator.txt b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
new file mode 100644
index 0000000..caad0c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/as3722-regulator.txt
@@ -0,0 +1,91 @@
+Regulator of AMS AS3722 PMIC.
+Name of the regulator subnode must be "regulators".
+
+Optional properties:
+--------------------
+The input supply of regulators are the optional properties on the
+regulator node. The AS3722 is having 7 DCDC step-down regulators as
+sd[0-6], 10 LDOs as ldo[0-7], ldo[9-11]. The input supply of these
+regulators are provided through following properties:
+vsup-sd2-supply: Input supply for SD2.
+vsup-sd3-supply: Input supply for SD3.
+vsup-sd4-supply: Input supply for SD4.
+vsup-sd5-supply: Input supply for SD5.
+vin-ldo0-supply: Input supply for LDO0.
+vin-ldo1-6-supply: Input supply for LDO1 and LDO6.
+vin-ldo2-5-7-supply: Input supply for LDO2, LDO5 and LDO7.
+vin-ldo3-4-supply: Input supply for LDO3 and LDO4.
+vin-ldo9-10-supply: Input supply for LDO9 and LDO10.
+vin-ldo11-supply: Input supply for LDO11.
+
+Optional nodes:
+--------------
+- regulators : Must contain a sub-node per regulator from the list below.
+ Each sub-node should contain the constraints and initialization
+ information for that regulator. See regulator.txt for a
+ description of standard properties for these sub-nodes.
+ Additional custom properties are listed below.
+ sd[0-6], ldo[0-7], ldo[9-11].
+
+ Optional sub-node properties:
+ ----------------------------
+ ams,ext-control: External control of the rail. The option of
+ this properties will tell which external input is
+ controlling this rail. Valid values are 0, 1, 2 ad 3.
+ 0: There is no external control of this rail.
+ 1: Rail is controlled by ENABLE1 input pin.
+ 2: Rail is controlled by ENABLE2 input pin.
+ 3: Rail is controlled by ENABLE3 input pin.
+ ams,enable-tracking: Enable tracking with SD1, only supported
+ by LDO3.
+
+Example:
+-------
+ ams3722: ams3722 {
+ compatible = "ams,as3722";
+ reg = <0x40>;
+ ...
+
+ regulators {
+ vsup-sd2-supply = <...>;
+ ...
+
+ sd0 {
+ regulator-name = "vdd_cpu";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <2>;
+ };
+
+ sd1 {
+ regulator-name = "vdd_core";
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-always-on;
+ ams,ext-control = <1>;
+ };
+
+ sd2 {
+ regulator-name = "vddio_ddr";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ sd4 {
+ regulator-name = "avdd-hdmi-pex";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ };
+
+ sd5 {
+ regulator-name = "vdd-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ ....
+ };
+ };
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 1100205..ce785f4 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -123,6 +123,14 @@ config REGULATOR_AS3711
This driver provides support for the voltage regulators on the
AS3711 PMIC
+config REGULATOR_AS3722
+ tristate "AMS AS3722 PMIC Regulators"
+ depends on MFD_AS3722
+ help
+ This driver provides support for the voltage regulators on the
+ AS3722 PMIC. This will enable support for all the software
+ controllable DCDC/LDO regulators.
+
config REGULATOR_DA903X
tristate "Dialog Semiconductor DA9030/DA9034 regulators"
depends on PMIC_DA903X
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index c328e08..01c597e 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o
obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o
obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o
obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
+obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
obj-$(CONFIG_REGULATOR_DA903X) += da903x.o
obj-$(CONFIG_REGULATOR_DA9052) += da9052-regulator.o
obj-$(CONFIG_REGULATOR_DA9055) += da9055-regulator.o
diff --git a/drivers/regulator/as3722-regulator.c b/drivers/regulator/as3722-regulator.c
new file mode 100644
index 0000000..16a5d26
--- /dev/null
+++ b/drivers/regulator/as3722-regulator.c
@@ -0,0 +1,917 @@
+/*
+ * Voltage regulator support for AMS AS3722 PMIC
+ *
+ * Copyright (C) 2013 ams
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/* Regulator IDs */
+enum as3722_regulators_id {
+ AS3722_REGULATOR_ID_SD0,
+ AS3722_REGULATOR_ID_SD1,
+ AS3722_REGULATOR_ID_SD2,
+ AS3722_REGULATOR_ID_SD3,
+ AS3722_REGULATOR_ID_SD4,
+ AS3722_REGULATOR_ID_SD5,
+ AS3722_REGULATOR_ID_SD6,
+ AS3722_REGULATOR_ID_LDO0,
+ AS3722_REGULATOR_ID_LDO1,
+ AS3722_REGULATOR_ID_LDO2,
+ AS3722_REGULATOR_ID_LDO3,
+ AS3722_REGULATOR_ID_LDO4,
+ AS3722_REGULATOR_ID_LDO5,
+ AS3722_REGULATOR_ID_LDO6,
+ AS3722_REGULATOR_ID_LDO7,
+ AS3722_REGULATOR_ID_LDO9,
+ AS3722_REGULATOR_ID_LDO10,
+ AS3722_REGULATOR_ID_LDO11,
+ AS3722_REGULATOR_ID_MAX,
+};
+
+struct as3722_register_mapping {
+ u8 regulator_id;
+ const char *name;
+ const char *sname;
+ u8 vsel_reg;
+ u8 vsel_mask;
+ int n_voltages;
+ u32 enable_reg;
+ u8 enable_mask;
+ u32 control_reg;
+ u8 mode_mask;
+ u32 sleep_ctrl_reg;
+ u8 sleep_ctrl_mask;
+};
+
+struct as3722_regulator_config_data {
+ struct regulator_init_data *reg_init;
+ bool enable_tracking;
+ int ext_control;
+};
+
+struct as3722_regulators {
+ struct device *dev;
+ struct as3722 *as3722;
+ struct regulator_dev *rdevs[AS3722_REGULATOR_ID_MAX];
+ struct regulator_desc desc[AS3722_REGULATOR_ID_MAX];
+ struct as3722_regulator_config_data
+ reg_config_data[AS3722_REGULATOR_ID_MAX];
+};
+
+static const struct as3722_register_mapping as3722_reg_lookup[] = {
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD0,
+ .name = "as3722-sd0",
+ .vsel_reg = AS3722_SD0_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(0),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+ .sleep_ctrl_mask = AS3722_SD0_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD0_CONTROL_REG,
+ .mode_mask = AS3722_SD0_MODE_FAST,
+ .n_voltages = AS3722_SD0_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD1,
+ .name = "as3722-sd1",
+ .vsel_reg = AS3722_SD1_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(1),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+ .sleep_ctrl_mask = AS3722_SD1_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD1_CONTROL_REG,
+ .mode_mask = AS3722_SD1_MODE_FAST,
+ .n_voltages = AS3722_SD0_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD2,
+ .name = "as3722-sd2",
+ .sname = "vsup-sd2",
+ .vsel_reg = AS3722_SD2_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(2),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+ .sleep_ctrl_mask = AS3722_SD2_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD23_CONTROL_REG,
+ .mode_mask = AS3722_SD2_MODE_FAST,
+ .n_voltages = AS3722_SD2_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD3,
+ .name = "as3722-sd3",
+ .sname = "vsup-sd3",
+ .vsel_reg = AS3722_SD3_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(3),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL1_REG,
+ .sleep_ctrl_mask = AS3722_SD3_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD23_CONTROL_REG,
+ .mode_mask = AS3722_SD3_MODE_FAST,
+ .n_voltages = AS3722_SD2_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD4,
+ .name = "as3722-sd4",
+ .sname = "vsup-sd4",
+ .vsel_reg = AS3722_SD4_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(4),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+ .sleep_ctrl_mask = AS3722_SD4_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD4_CONTROL_REG,
+ .mode_mask = AS3722_SD4_MODE_FAST,
+ .n_voltages = AS3722_SD2_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD5,
+ .name = "as3722-sd5",
+ .sname = "vsup-sd5",
+ .vsel_reg = AS3722_SD5_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(5),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+ .sleep_ctrl_mask = AS3722_SD5_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD5_CONTROL_REG,
+ .mode_mask = AS3722_SD5_MODE_FAST,
+ .n_voltages = AS3722_SD2_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_SD6,
+ .name = "as3722-sd6",
+ .vsel_reg = AS3722_SD6_VOLTAGE_REG,
+ .vsel_mask = AS3722_SD_VSEL_MASK,
+ .enable_reg = AS3722_SD_CONTROL_REG,
+ .enable_mask = AS3722_SDn_CTRL(6),
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL2_REG,
+ .sleep_ctrl_mask = AS3722_SD6_EXT_ENABLE_MASK,
+ .control_reg = AS3722_SD6_CONTROL_REG,
+ .mode_mask = AS3722_SD6_MODE_FAST,
+ .n_voltages = AS3722_SD0_VSEL_MAX,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO0,
+ .name = "as3722-ldo0",
+ .sname = "vin-ldo0",
+ .vsel_reg = AS3722_LDO0_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO0_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO0_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+ .sleep_ctrl_mask = AS3722_LDO0_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO0_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO1,
+ .name = "as3722-ldo1",
+ .sname = "vin-ldo1-6",
+ .vsel_reg = AS3722_LDO1_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO1_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+ .sleep_ctrl_mask = AS3722_LDO1_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO2,
+ .name = "as3722-ldo2",
+ .sname = "vin-ldo2-5-7",
+ .vsel_reg = AS3722_LDO2_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO2_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+ .sleep_ctrl_mask = AS3722_LDO2_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO3,
+ .name = "as3722-ldo3",
+ .name = "vin-ldo3-4",
+ .vsel_reg = AS3722_LDO3_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO3_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO3_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL3_REG,
+ .sleep_ctrl_mask = AS3722_LDO3_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO3_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO4,
+ .name = "as3722-ldo4",
+ .name = "vin-ldo3-4",
+ .vsel_reg = AS3722_LDO4_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO4_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+ .sleep_ctrl_mask = AS3722_LDO4_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO5,
+ .name = "as3722-ldo5",
+ .sname = "vin-ldo2-5-7",
+ .vsel_reg = AS3722_LDO5_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO5_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+ .sleep_ctrl_mask = AS3722_LDO5_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO6,
+ .name = "as3722-ldo6",
+ .sname = "vin-ldo1-6",
+ .vsel_reg = AS3722_LDO6_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO6_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+ .sleep_ctrl_mask = AS3722_LDO6_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO7,
+ .name = "as3722-ldo7",
+ .sname = "vin-ldo2-5-7",
+ .vsel_reg = AS3722_LDO7_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL0_REG,
+ .enable_mask = AS3722_LDO7_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL4_REG,
+ .sleep_ctrl_mask = AS3722_LDO7_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO9,
+ .name = "as3722-ldo9",
+ .sname = "vin-ldo9-10",
+ .vsel_reg = AS3722_LDO9_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL1_REG,
+ .enable_mask = AS3722_LDO9_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+ .sleep_ctrl_mask = AS3722_LDO9_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO10,
+ .name = "as3722-ldo10",
+ .sname = "vin-ldo9-10",
+ .vsel_reg = AS3722_LDO10_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL1_REG,
+ .enable_mask = AS3722_LDO10_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+ .sleep_ctrl_mask = AS3722_LDO10_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+ {
+ .regulator_id = AS3722_REGULATOR_ID_LDO11,
+ .name = "as3722-ldo11",
+ .sname = "vin-ldo11",
+ .vsel_reg = AS3722_LDO11_VOLTAGE_REG,
+ .vsel_mask = AS3722_LDO_VSEL_MASK,
+ .enable_reg = AS3722_LDOCONTROL1_REG,
+ .enable_mask = AS3722_LDO11_CTRL,
+ .sleep_ctrl_reg = AS3722_ENABLE_CTRL5_REG,
+ .sleep_ctrl_mask = AS3722_LDO11_EXT_ENABLE_MASK,
+ .n_voltages = AS3722_LDO_NUM_VOLT,
+ },
+};
+
+
+static const int as3722_ldo_current[] = { 150000, 300000 };
+static const int as3722_sd016_current[] = { 2500000, 3000000, 3500000 };
+
+static int as3722_current_to_index(int min_uA, int max_uA,
+ const int *curr_table, int n_currents)
+{
+ int i;
+
+ for (i = n_currents - 1; i >= 0; i--) {
+ if ((min_uA <= curr_table[i]) && (curr_table[i] <= max_uA))
+ return i;
+ }
+ return -EINVAL;
+}
+
+static int as3722_ldo_get_current_limit(struct regulator_dev *rdev)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ int id = rdev_get_id(rdev);
+ u32 val;
+ int ret;
+
+ ret = as3722_read(as3722, as3722_reg_lookup[id].vsel_reg, &val);
+ if (ret < 0) {
+ dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+ as3722_reg_lookup[id].vsel_reg, ret);
+ return ret;
+ }
+ if (val & AS3722_LDO_ILIMIT_MASK)
+ return 300000;
+ return 150000;
+}
+
+static int as3722_ldo_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ int id = rdev_get_id(rdev);
+ int ret;
+ u32 reg = 0;
+
+ ret = as3722_current_to_index(min_uA, max_uA, as3722_ldo_current,
+ ARRAY_SIZE(as3722_ldo_current));
+ if (ret < 0) {
+ dev_err(as3722_regs->dev,
+ "Current range min:max = %d:%d does not support\n",
+ min_uA, max_uA);
+ return ret;
+ }
+ if (ret)
+ reg = AS3722_LDO_ILIMIT_BIT;
+ return as3722_update_bits(as3722, as3722_reg_lookup[id].vsel_reg,
+ AS3722_LDO_ILIMIT_MASK, reg);
+}
+
+static struct regulator_ops as3722_ldo0_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_ldo_get_current_limit,
+ .set_current_limit = as3722_ldo_set_current_limit,
+};
+
+static struct regulator_ops as3722_ldo0_extcntrl_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_ldo_get_current_limit,
+ .set_current_limit = as3722_ldo_set_current_limit,
+};
+
+static int as3722_ldo3_set_tracking_mode(struct as3722_regulators *as3722_reg,
+ int id, u8 mode)
+{
+ struct as3722 *as3722 = as3722_reg->as3722;
+
+ switch (mode) {
+ case AS3722_LDO3_MODE_PMOS:
+ case AS3722_LDO3_MODE_PMOS_TRACKING:
+ case AS3722_LDO3_MODE_NMOS:
+ case AS3722_LDO3_MODE_SWITCH:
+ return as3722_update_bits(as3722,
+ as3722_reg_lookup[id].vsel_reg,
+ AS3722_LDO3_MODE_MASK, mode);
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int as3722_ldo3_get_current_limit(struct regulator_dev *rdev)
+{
+ return 150000;
+}
+
+static struct regulator_ops as3722_ldo3_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_ldo3_get_current_limit,
+};
+
+static struct regulator_ops as3722_ldo3_extcntrl_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_ldo3_get_current_limit,
+};
+
+#define regulator_lin_range(_min_sel, _max_sel, _min_uV, _step_uV) \
+ { \
+ .min_sel = _min_sel, \
+ .max_sel = _max_sel, \
+ .uV_step = _step_uV, \
+ .min_uV = _min_uV, \
+ .max_uV = _min_uV + (_max_sel - _min_sel + 1) * _step_uV, \
+ }
+
+static const struct regulator_linear_range as3722_ldo_ranges[] = {
+ regulator_lin_range(0x01, 0x24, 800000, 25000),
+ regulator_lin_range(0x40, 0x7F, 1725000, 25000),
+};
+
+static struct regulator_ops as3722_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .get_current_limit = as3722_ldo_get_current_limit,
+ .set_current_limit = as3722_ldo_set_current_limit,
+};
+
+static struct regulator_ops as3722_ldo_extcntrl_ops = {
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .get_current_limit = as3722_ldo_get_current_limit,
+ .set_current_limit = as3722_ldo_set_current_limit,
+};
+
+static unsigned int as3722_sd_get_mode(struct regulator_dev *rdev)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ int id = rdev_get_id(rdev);
+ u32 val;
+ int ret;
+
+ if (!as3722_reg_lookup[id].control_reg)
+ return -ENOTSUPP;
+
+ ret = as3722_read(as3722, as3722_reg_lookup[id].control_reg, &val);
+ if (ret < 0) {
+ dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+ as3722_reg_lookup[id].control_reg, ret);
+ return ret;
+ }
+
+ if (val & as3722_reg_lookup[id].mode_mask)
+ return REGULATOR_MODE_FAST;
+ else
+ return REGULATOR_MODE_NORMAL;
+}
+
+static int as3722_sd_set_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ u8 id = rdev_get_id(rdev);
+ u8 val = 0;
+ int ret;
+
+ if (!as3722_reg_lookup[id].control_reg)
+ return -ERANGE;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = as3722_reg_lookup[id].mode_mask;
+ case REGULATOR_MODE_NORMAL: /* fall down */
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = as3722_update_bits(as3722, as3722_reg_lookup[id].control_reg,
+ as3722_reg_lookup[id].mode_mask, val);
+ if (ret < 0) {
+ dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n",
+ as3722_reg_lookup[id].control_reg, ret);
+ return ret;
+ }
+ return ret;
+}
+
+static int as3722_sd016_get_current_limit(struct regulator_dev *rdev)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ int id = rdev_get_id(rdev);
+ u32 val, reg;
+ int mask;
+ int ret;
+
+ switch (id) {
+ case AS3722_REGULATOR_ID_SD0:
+ reg = AS3722_OVCURRENT_REG;
+ mask = AS3722_OVCURRENT_SD0_TRIP_MASK;
+ break;
+ case AS3722_REGULATOR_ID_SD1:
+ reg = AS3722_OVCURRENT_REG;
+ mask = AS3722_OVCURRENT_SD1_TRIP_MASK;
+ break;
+ case AS3722_REGULATOR_ID_SD6:
+ reg = AS3722_OVCURRENT_DEB_REG;
+ mask = AS3722_OVCURRENT_SD6_TRIP_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+ ret = as3722_read(as3722, reg, &val);
+ if (ret < 0) {
+ dev_err(as3722_regs->dev, "Reg 0x%02x read failed: %d\n",
+ reg, ret);
+ return ret;
+ }
+ val &= mask;
+ val >>= ffs(mask) - 1;
+ if (val == 3)
+ return -EINVAL;
+ return as3722_sd016_current[val];
+}
+
+static int as3722_sd016_set_current_limit(struct regulator_dev *rdev,
+ int min_uA, int max_uA)
+{
+ struct as3722_regulators *as3722_regs = rdev_get_drvdata(rdev);
+ struct as3722 *as3722 = as3722_regs->as3722;
+ int id = rdev_get_id(rdev);
+ int ret;
+ int val;
+ int mask;
+ u32 reg;
+
+ ret = as3722_current_to_index(min_uA, max_uA, as3722_sd016_current,
+ ARRAY_SIZE(as3722_sd016_current));
+ if (ret < 0) {
+ dev_err(as3722_regs->dev,
+ "Current range min:max = %d:%d does not support\n",
+ min_uA, max_uA);
+ return ret;
+ }
+
+ switch (id) {
+ case AS3722_REGULATOR_ID_SD0:
+ reg = AS3722_OVCURRENT_REG;
+ mask = AS3722_OVCURRENT_SD0_TRIP_MASK;
+ break;
+ case AS3722_REGULATOR_ID_SD1:
+ reg = AS3722_OVCURRENT_REG;
+ mask = AS3722_OVCURRENT_SD1_TRIP_MASK;
+ break;
+ case AS3722_REGULATOR_ID_SD6:
+ reg = AS3722_OVCURRENT_DEB_REG;
+ mask = AS3722_OVCURRENT_SD6_TRIP_MASK;
+ break;
+ default:
+ return -EINVAL;
+ }
+ val = ret & mask;
+ val <<= ffs(mask) - 1;
+ return as3722_update_bits(as3722, reg, mask, val);
+}
+
+static const struct regulator_linear_range as3722_sd2345_ranges[] = {
+ regulator_lin_range(0x01, 0x40, 600000, 12500),
+ regulator_lin_range(0x41, 0x70, 1400000, 25000),
+ regulator_lin_range(0x71, 0x7F, 1725000, 50000),
+};
+
+static struct regulator_ops as3722_sd016_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_sd016_get_current_limit,
+ .set_current_limit = as3722_sd016_set_current_limit,
+ .get_mode = as3722_sd_get_mode,
+ .set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd016_extcntrl_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_current_limit = as3722_sd016_get_current_limit,
+ .set_current_limit = as3722_sd016_set_current_limit,
+ .get_mode = as3722_sd_get_mode,
+ .set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd2345_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_mode = as3722_sd_get_mode,
+ .set_mode = as3722_sd_set_mode,
+};
+
+static struct regulator_ops as3722_sd2345_extcntrl_ops = {
+ .list_voltage = regulator_list_voltage_linear_range,
+ .map_voltage = regulator_map_voltage_linear_range,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .get_mode = as3722_sd_get_mode,
+ .set_mode = as3722_sd_set_mode,
+};
+
+static int as3722_extreg_init(struct as3722_regulators *as3722_regs, int id,
+ int ext_pwr_ctrl)
+{
+ int ret;
+ unsigned int val;
+
+ if ((ext_pwr_ctrl < AS3722_EXT_CONTROL_ENABLE1) ||
+ (ext_pwr_ctrl > AS3722_EXT_CONTROL_ENABLE3))
+ return -EINVAL;
+
+ val = ext_pwr_ctrl << (ffs(as3722_reg_lookup[id].sleep_ctrl_mask) - 1);
+ ret = as3722_update_bits(as3722_regs->as3722,
+ as3722_reg_lookup[id].sleep_ctrl_reg,
+ as3722_reg_lookup[id].sleep_ctrl_mask, val);
+ if (ret < 0)
+ dev_err(as3722_regs->dev, "Reg 0x%02x update failed: %d\n",
+ as3722_reg_lookup[id].sleep_ctrl_reg, ret);
+ return ret;
+}
+
+static struct of_regulator_match as3722_regulator_matches[] = {
+ { .name = "sd0", },
+ { .name = "sd1", },
+ { .name = "sd2", },
+ { .name = "sd3", },
+ { .name = "sd4", },
+ { .name = "sd5", },
+ { .name = "sd6", },
+ { .name = "ldo0", },
+ { .name = "ldo1", },
+ { .name = "ldo2", },
+ { .name = "ldo3", },
+ { .name = "ldo4", },
+ { .name = "ldo5", },
+ { .name = "ldo6", },
+ { .name = "ldo7", },
+ { .name = "ldo9", },
+ { .name = "ldo10", },
+ { .name = "ldo11", },
+};
+
+static int as3722_get_regulator_dt_data(struct platform_device *pdev,
+ struct as3722_regulators *as3722_regs)
+{
+ struct device_node *np;
+ struct as3722_regulator_config_data *reg_config;
+ u32 prop;
+ int id;
+ int ret;
+
+ np = of_get_child_by_name(pdev->dev.parent->of_node, "regulators");
+ if (!np) {
+ dev_err(&pdev->dev, "Device is not having regulators node\n");
+ return -ENODEV;
+ }
+ pdev->dev.of_node = np;
+
+ ret = of_regulator_match(&pdev->dev, np, as3722_regulator_matches,
+ ARRAY_SIZE(as3722_regulator_matches));
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Parsing of regulator node failed: %d\n",
+ ret);
+ return ret;
+ }
+
+ for (id = 0; id < ARRAY_SIZE(as3722_regulator_matches); ++id) {
+ struct device_node *reg_node;
+
+ reg_config = &as3722_regs->reg_config_data[id];
+ reg_config->reg_init = as3722_regulator_matches[id].init_data;
+ reg_node = as3722_regulator_matches[id].of_node;
+
+ if (!reg_config->reg_init || !reg_node)
+ continue;
+
+ ret = of_property_read_u32(reg_node, "ams,ext-control", &prop);
+ if (!ret) {
+ if (prop < 3)
+ reg_config->ext_control = prop;
+ else
+ dev_warn(&pdev->dev,
+ "ext-control have invalid option: %u\n",
+ prop);
+ }
+ reg_config->enable_tracking =
+ of_property_read_bool(reg_node, "ams,enable-tracking");
+ }
+ return 0;
+}
+
+static int as3722_regulator_probe(struct platform_device *pdev)
+{
+ struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent);
+ struct as3722_regulators *as3722_regs;
+ struct as3722_regulator_config_data *reg_config;
+ struct regulator_dev *rdev;
+ struct regulator_config config = { };
+ struct regulator_ops *ops;
+ int id;
+ int ret;
+
+ as3722_regs = devm_kzalloc(&pdev->dev, sizeof(*as3722_regs),
+ GFP_KERNEL);
+ if (!as3722_regs)
+ return -ENOMEM;
+
+ as3722_regs->dev = &pdev->dev;
+ as3722_regs->as3722 = as3722;
+ platform_set_drvdata(pdev, as3722_regs);
+
+ ret = as3722_get_regulator_dt_data(pdev, as3722_regs);
+ if (ret < 0)
+ return ret;
+
+ config.dev = &pdev->dev;
+ config.driver_data = as3722_regs;
+ config.regmap = as3722->regmap;
+
+ for (id = 0; id < AS3722_REGULATOR_ID_MAX; id++) {
+ reg_config = &as3722_regs->reg_config_data[id];
+
+ as3722_regs->desc[id].name = as3722_reg_lookup[id].name;
+ as3722_regs->desc[id].supply_name = as3722_reg_lookup[id].sname;
+ as3722_regs->desc[id].id = as3722_reg_lookup[id].regulator_id;
+ as3722_regs->desc[id].n_voltages =
+ as3722_reg_lookup[id].n_voltages;
+ as3722_regs->desc[id].type = REGULATOR_VOLTAGE;
+ as3722_regs->desc[id].owner = THIS_MODULE;
+ as3722_regs->desc[id].enable_reg =
+ as3722_reg_lookup[id].enable_reg;
+ as3722_regs->desc[id].enable_mask =
+ as3722_reg_lookup[id].enable_mask;
+ as3722_regs->desc[id].vsel_reg = as3722_reg_lookup[id].vsel_reg;
+ as3722_regs->desc[id].vsel_mask =
+ as3722_reg_lookup[id].vsel_mask;
+ switch (id) {
+ case AS3722_REGULATOR_ID_LDO0:
+ if (reg_config->ext_control)
+ ops = &as3722_ldo0_extcntrl_ops;
+ else
+ ops = &as3722_ldo0_ops;
+ as3722_regs->desc[id].min_uV = 825000;
+ as3722_regs->desc[id].uV_step = 25000;
+ as3722_regs->desc[id].linear_min_sel = 1;
+ as3722_regs->desc[id].enable_time = 500;
+ break;
+ case AS3722_REGULATOR_ID_LDO3:
+ if (reg_config->ext_control)
+ ops = &as3722_ldo3_extcntrl_ops;
+ else
+ ops = &as3722_ldo3_ops;
+ as3722_regs->desc[id].min_uV = 620000;
+ as3722_regs->desc[id].uV_step = 20000;
+ as3722_regs->desc[id].linear_min_sel = 1;
+ as3722_regs->desc[id].enable_time = 500;
+ if (reg_config->enable_tracking) {
+ ret = as3722_ldo3_set_tracking_mode(as3722_regs,
+ id, AS3722_LDO3_MODE_PMOS_TRACKING);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "LDO3 tracking failed: %d\n",
+ ret);
+ return ret;
+ }
+ }
+ break;
+ case AS3722_REGULATOR_ID_SD0:
+ case AS3722_REGULATOR_ID_SD1:
+ case AS3722_REGULATOR_ID_SD6:
+ if (reg_config->ext_control)
+ ops = &as3722_sd016_extcntrl_ops;
+ else
+ ops = &as3722_sd016_ops;
+ as3722_regs->desc[id].min_uV = 610000;
+ as3722_regs->desc[id].uV_step = 10000;
+ as3722_regs->desc[id].linear_min_sel = 1;
+ break;
+ case AS3722_REGULATOR_ID_SD2:
+ case AS3722_REGULATOR_ID_SD3:
+ case AS3722_REGULATOR_ID_SD4:
+ case AS3722_REGULATOR_ID_SD5:
+ if (reg_config->ext_control)
+ ops = &as3722_sd2345_extcntrl_ops;
+ else
+ ops = &as3722_sd2345_ops;
+ as3722_regs->desc[id].linear_ranges =
+ as3722_sd2345_ranges;
+ as3722_regs->desc[id].n_linear_ranges =
+ ARRAY_SIZE(as3722_sd2345_ranges);
+ break;
+ default:
+ if (reg_config->ext_control)
+ ops = &as3722_ldo_extcntrl_ops;
+ else
+ ops = &as3722_ldo_ops;
+ as3722_regs->desc[id].min_uV = 825000;
+ as3722_regs->desc[id].uV_step = 25000;
+ as3722_regs->desc[id].linear_min_sel = 1;
+ as3722_regs->desc[id].enable_time = 500;
+ as3722_regs->desc[id].linear_ranges = as3722_ldo_ranges;
+ as3722_regs->desc[id].n_linear_ranges =
+ ARRAY_SIZE(as3722_ldo_ranges);
+ break;
+ }
+ as3722_regs->desc[id].ops = ops;
+ config.init_data = reg_config->reg_init;
+ config.of_node = as3722_regulator_matches[id].of_node;
+ rdev = devm_regulator_register(&pdev->dev,
+ &as3722_regs->desc[id], &config);
+ if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
+ dev_err(&pdev->dev, "regulator %d register failed %d\n",
+ id, ret);
+ return ret;
+ }
+
+ as3722_regs->rdevs[id] = rdev;
+ if (reg_config->ext_control) {
+ ret = regulator_enable_regmap(rdev);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "Regulator %d enable failed: %d\n",
+ id, ret);
+ return ret;
+ }
+ ret = as3722_extreg_init(as3722_regs, id,
+ reg_config->ext_control);
+ if (ret < 0) {
+ dev_err(&pdev->dev,
+ "AS3722 ext control failed: %d", ret);
+ return ret;
+ }
+ }
+ }
+ return 0;
+}
+
+static const struct of_device_id of_as3722_regulator_match[] = {
+ { .compatible = "ams,as3722-regulator", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_as3722_regulator_match);
+
+static struct platform_driver as3722_regulator_driver = {
+ .driver = {
+ .name = "as3722-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_as3722_regulator_match,
+ },
+ .probe = as3722_regulator_probe,
+};
+
+module_platform_driver(as3722_regulator_driver);
+
+MODULE_ALIAS("platform:as3722-regulator");
+MODULE_DESCRIPTION("AS3722 regulator driver");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL");
--
1.7.1.1
^ permalink raw reply related [flat|nested] 15+ messages in thread* Re: [PATCH V2 4/5] regulator: as3722: add regulator driver for AMS AS3722
2013-09-20 12:30 ` [PATCH V2 4/5] regulator: as3722: add regulator driver for AMS AS3722 Laxman Dewangan
@ 2013-09-20 17:08 ` Mark Brown
0 siblings, 0 replies; 15+ messages in thread
From: Mark Brown @ 2013-09-20 17:08 UTC (permalink / raw)
To: Laxman Dewangan
Cc: lee.jones, sameo, linus.walleij, akpm, devicetree, linux-doc,
linux-kernel, linux-gpio, rtc-linux, rob.herring, mark.rutland,
pawel.moll, swarren, rob, ijc+devicetree, grant.likely,
Florian Lobmaier
[-- Attachment #1: Type: text/plain, Size: 243 bytes --]
On Fri, Sep 20, 2013 at 06:00:13PM +0530, Laxman Dewangan wrote:
> The AMS AS3722 is a compact system PMU suitable for mobile phones,
> tablets etc. It has 4 DCDC step down regulators, 3 DCDC step down
> controller, 11 LDOs.
Applied, thanks.
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 15+ messages in thread
* [PATCH V2 5/5] drivers/rtc/rtc-as3722: add RTC driver
2013-09-20 12:30 [PATCH V2 0/5] Add AMS AS3722 mfd, GPIO, regulator and RTC driver Laxman Dewangan
` (3 preceding siblings ...)
2013-09-20 12:30 ` [PATCH V2 4/5] regulator: as3722: add regulator driver for AMS AS3722 Laxman Dewangan
@ 2013-09-20 12:30 ` Laxman Dewangan
4 siblings, 0 replies; 15+ messages in thread
From: Laxman Dewangan @ 2013-09-20 12:30 UTC (permalink / raw)
To: lee.jones, sameo, broonie, linus.walleij, akpm
Cc: devicetree, linux-doc, linux-kernel, linux-gpio, rtc-linux,
rob.herring, mark.rutland, pawel.moll, swarren, rob,
ijc+devicetree, grant.likely, Laxman Dewangan, Florian Lobmaier
The AMS AS3722 is a compact system PMU suitable for mobile phones,
tablets etc.
Add a driver to support accessing the RTC found on the AMS AS3722
PMIC using RTC framework.
Signed-off-by: Laxman Dewangan <ldewangan@nvidia.com>
Signed-off-by: Florian Lobmaier <florian.lobmaier@ams.com>
---
Changes from V1:
- Get rid of clk32k out configuration from RTC. Will add clock driver.
drivers/rtc/Kconfig | 10 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-as3722.c | 296 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 307 insertions(+), 0 deletions(-)
create mode 100644 drivers/rtc/rtc-as3722.c
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 9654aa3..3a17788 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -153,6 +153,16 @@ config RTC_DRV_88PM80X
This driver can also be built as a module. If so, the module
will be called rtc-88pm80x.
+config RTC_DRV_AS3722
+ tristate "AMS AS3722 RTC driver"
+ depends on MFD_AS3722
+ help
+ If you say yes here you get support for the RTC of AMS AS3722 PMIC
+ chips.
+
+ This driver can also be built as a module. If so, the module
+ will be called rtc-as3722.
+
config RTC_DRV_DS1307
tristate "Dallas/Maxim DS1307/37/38/39/40, ST M41T00, EPSON RX-8025"
help
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2dff3d2..fdb5764 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_RTC_DRV_88PM860X) += rtc-88pm860x.o
obj-$(CONFIG_RTC_DRV_88PM80X) += rtc-88pm80x.o
obj-$(CONFIG_RTC_DRV_AB3100) += rtc-ab3100.o
obj-$(CONFIG_RTC_DRV_AB8500) += rtc-ab8500.o
+obj-$(CONFIG_RTC_DRV_AS3722) += rtc-as3722.o
obj-$(CONFIG_RTC_DRV_AT32AP700X)+= rtc-at32ap700x.o
obj-$(CONFIG_RTC_DRV_AT91RM9200)+= rtc-at91rm9200.o
obj-$(CONFIG_RTC_DRV_AT91SAM9) += rtc-at91sam9.o
diff --git a/drivers/rtc/rtc-as3722.c b/drivers/rtc/rtc-as3722.c
new file mode 100644
index 0000000..430a927
--- /dev/null
+++ b/drivers/rtc/rtc-as3722.c
@@ -0,0 +1,296 @@
+/*
+ * rtc-as3722.c - Real Time Clock driver for ams AS3722 PMICs
+ *
+ * Copyright (C) 2013 ams AG
+ * Copyright (c) 2013, NVIDIA Corporation. All rights reserved.
+ *
+ * Author: Florian Lobmaier <florian.lobmaier@ams.com>
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+
+#include <linux/bcd.h>
+#include <linux/completion.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/ioctl.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mfd/as3722.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/rtc.h>
+#include <linux/time.h>
+
+#define AS3722_RTC_START_YEAR 2000
+struct as3722_rtc {
+ struct rtc_device *rtc;
+ struct device *dev;
+ struct as3722 *as3722;
+ int alarm_irq;
+ bool irq_enable;
+};
+
+static void as3722_time_to_reg(u8 *rbuff, struct rtc_time *tm)
+{
+ rbuff[0] = bin2bcd(tm->tm_sec);
+ rbuff[1] = bin2bcd(tm->tm_min);
+ rbuff[2] = bin2bcd(tm->tm_hour);
+ rbuff[3] = bin2bcd(tm->tm_mday);
+ rbuff[4] = bin2bcd(tm->tm_mon);
+ rbuff[5] = bin2bcd(tm->tm_year - (AS3722_RTC_START_YEAR - 1900));
+}
+
+static void as3722_reg_to_time(u8 *rbuff, struct rtc_time *tm)
+{
+ tm->tm_sec = bcd2bin(rbuff[0] & 0x7F);
+ tm->tm_min = bcd2bin(rbuff[1] & 0x7F);
+ tm->tm_hour = bcd2bin(rbuff[2] & 0x3F);
+ tm->tm_mday = bcd2bin(rbuff[3] & 0x3F);
+ tm->tm_mon = bcd2bin(rbuff[4] & 0x1F);
+ tm->tm_year = (AS3722_RTC_START_YEAR - 1900) + bcd2bin(rbuff[5] & 0x7F);
+ return;
+}
+
+static int as3722_rtc_read_time(struct device *dev, struct rtc_time *tm)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+ struct as3722 *as3722 = as3722_rtc->as3722;
+ u8 as_time_array[6];
+ int ret;
+
+ ret = as3722_block_read(as3722, AS3722_RTC_SECOND_REG,
+ 6, as_time_array);
+ if (ret < 0) {
+ dev_err(dev, "RTC_SECOND reg block read failed %d\n", ret);
+ return ret;
+ }
+ as3722_reg_to_time(as_time_array, tm);
+ return 0;
+}
+
+static int as3722_rtc_set_time(struct device *dev, struct rtc_time *tm)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+ struct as3722 *as3722 = as3722_rtc->as3722;
+ u8 as_time_array[6];
+ int ret;
+
+ if (tm->tm_year < (AS3722_RTC_START_YEAR - 1900))
+ return -EINVAL;
+
+ as3722_time_to_reg(as_time_array, tm);
+ ret = as3722_block_write(as3722, AS3722_RTC_SECOND_REG, 6,
+ as_time_array);
+ if (ret < 0)
+ dev_err(dev, "RTC_SECOND reg block write failed %d\n", ret);
+ return ret;
+}
+
+static int as3722_rtc_alarm_irq_enable(struct device *dev,
+ unsigned int enabled)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+ if (enabled && !as3722_rtc->irq_enable) {
+ enable_irq(as3722_rtc->alarm_irq);
+ as3722_rtc->irq_enable = true;
+ } else if (!enabled && as3722_rtc->irq_enable) {
+ disable_irq(as3722_rtc->alarm_irq);
+ as3722_rtc->irq_enable = false;
+ }
+ return 0;
+}
+
+static int as3722_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+ struct as3722 *as3722 = as3722_rtc->as3722;
+ u8 as_time_array[6];
+ int ret;
+
+ ret = as3722_block_read(as3722, AS3722_RTC_ALARM_SECOND_REG, 6,
+ as_time_array);
+ if (ret < 0) {
+ dev_err(dev, "RTC_ALARM_SECOND block read failed %d\n", ret);
+ return ret;
+ }
+
+ as3722_reg_to_time(as_time_array, &alrm->time);
+ return 0;
+}
+
+static int as3722_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+ struct as3722 *as3722 = as3722_rtc->as3722;
+ u8 as_time_array[6];
+ int ret;
+
+ if (alrm->time.tm_year < (AS3722_RTC_START_YEAR - 1900))
+ return -EINVAL;
+
+ ret = as3722_rtc_alarm_irq_enable(dev, 0);
+ if (ret < 0) {
+ dev_err(dev, "Disable RTC alarm failed\n");
+ return ret;
+ }
+
+ as3722_time_to_reg(as_time_array, &alrm->time);
+ ret = as3722_block_write(as3722, AS3722_RTC_ALARM_SECOND_REG, 6,
+ as_time_array);
+ if (ret < 0) {
+ dev_err(dev, "RTC_ALARM_SECOND block write failed %d\n", ret);
+ return ret;
+ }
+
+ if (alrm->enabled)
+ ret = as3722_rtc_alarm_irq_enable(dev, alrm->enabled);
+ return ret;
+}
+
+static irqreturn_t as3722_alarm_irq(int irq, void *data)
+{
+ struct as3722_rtc *as3722_rtc = data;
+
+ rtc_update_irq(as3722_rtc->rtc, 1, RTC_IRQF | RTC_AF);
+ return IRQ_HANDLED;
+}
+
+static const struct rtc_class_ops as3722_rtc_ops = {
+ .read_time = as3722_rtc_read_time,
+ .set_time = as3722_rtc_set_time,
+ .read_alarm = as3722_rtc_read_alarm,
+ .set_alarm = as3722_rtc_set_alarm,
+ .alarm_irq_enable = as3722_rtc_alarm_irq_enable,
+};
+
+static int as3722_rtc_probe(struct platform_device *pdev)
+{
+ struct as3722 *as3722 = dev_get_drvdata(pdev->dev.parent);
+ struct as3722_rtc *as3722_rtc;
+ int val;
+ int ret;
+
+ as3722_rtc = devm_kzalloc(&pdev->dev, sizeof(*as3722_rtc), GFP_KERNEL);
+ if (!as3722_rtc)
+ return -ENOMEM;
+
+ as3722_rtc->as3722 = as3722;
+ as3722_rtc->dev = &pdev->dev;
+ platform_set_drvdata(pdev, as3722_rtc);
+
+ /* Enable the RTC to make sure it is running. */
+ ret = as3722_update_bits(as3722, AS3722_RTC_CONTROL_REG,
+ AS3722_RTC_ON, AS3722_RTC_ON);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "RTC_CONTROL reg update failed: %d\n", ret);
+ return ret;
+ }
+
+ val = AS3722_RTC_ON | AS3722_RTC_ALARM_WAKEUP_EN;
+ ret = as3722_write(as3722, AS3722_RTC_CONTROL_REG, val);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "RTC_CONTROL reg write failed: %d\n", ret);
+ return ret;
+ }
+
+ device_init_wakeup(&pdev->dev, 1);
+
+ as3722_rtc->rtc = rtc_device_register("as3722", &pdev->dev,
+ &as3722_rtc_ops, THIS_MODULE);
+ if (IS_ERR(as3722_rtc->rtc)) {
+ ret = PTR_ERR(as3722_rtc->rtc);
+ dev_err(&pdev->dev, "RTC register failed: %d\n", ret);
+ return ret;
+ }
+
+ as3722_rtc->alarm_irq = platform_get_irq(pdev, 0);
+ dev_info(&pdev->dev, "RTC interrupt %d\n", as3722_rtc->alarm_irq);
+
+ ret = request_threaded_irq(as3722_rtc->alarm_irq, NULL,
+ as3722_alarm_irq, IRQF_ONESHOT | IRQF_EARLY_RESUME,
+ "rtc-alarm", as3722_rtc);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to request alarm IRQ %d: %d\n",
+ as3722_rtc->alarm_irq, ret);
+ goto scrub;
+ }
+ disable_irq(as3722_rtc->alarm_irq);
+ return 0;
+scrub:
+ rtc_device_unregister(as3722_rtc->rtc);
+ return ret;
+}
+
+static int as3722_rtc_remove(struct platform_device *pdev)
+{
+ struct as3722_rtc *as3722_rtc = platform_get_drvdata(pdev);
+
+ free_irq(as3722_rtc->alarm_irq, as3722_rtc);
+ rtc_device_unregister(as3722_rtc->rtc);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int as3722_rtc_suspend(struct device *dev)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ enable_irq_wake(as3722_rtc->alarm_irq);
+
+ return 0;
+}
+
+static int as3722_rtc_resume(struct device *dev)
+{
+ struct as3722_rtc *as3722_rtc = dev_get_drvdata(dev);
+
+ if (device_may_wakeup(dev))
+ disable_irq_wake(as3722_rtc->alarm_irq);
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops as3722_rtc_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(as3722_rtc_suspend, as3722_rtc_resume)
+};
+
+static const struct of_device_id of_as3722_rtc_match[] = {
+ { .compatible = "ams,as3722-rtc"},
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_as3722_rtc_match);
+
+static struct platform_driver as3722_rtc_driver = {
+ .probe = as3722_rtc_probe,
+ .remove = as3722_rtc_remove,
+ .driver = {
+ .name = "as3722-rtc",
+ .pm = &as3722_rtc_pm_ops,
+ .of_match_table = of_as3722_rtc_match,
+ },
+};
+module_platform_driver(as3722_rtc_driver);
+
+MODULE_DESCRIPTION("RTC driver for AS3722 PMICs");
+MODULE_ALIAS("platform:as3722-rtc");
+MODULE_AUTHOR("Florian Lobmaier <florian.lobmaier@ams.com>");
+MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
+MODULE_LICENSE("GPL");
--
1.7.1.1
^ permalink raw reply related [flat|nested] 15+ messages in thread