From: Tony Lindgren <tony@atomide.com>
To: Tero Kristo <t-kristo@ti.com>
Cc: linux-omap@vger.kernel.org, paul@pwsan.com, nm@ti.com,
rnayak@ti.com, bcousson@baylibre.com, mturquette@linaro.org,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT
Date: Sun, 6 Oct 2013 19:15:57 -0700 [thread overview]
Message-ID: <20131007021556.GV8949@atomide.com> (raw)
In-Reply-To: <524EE00F.7010208@ti.com>
* Tero Kristo <t-kristo@ti.com> [131004 08:42]:
> Hi,
>
> Just a gentle reminder, anybody have any comments on this series or
> should we start queuing stuff?
Well omap4 seems to work for me just fine, and omap3 in legacy
mode. But looks like omap3 device tree based booting is breaking
after I pulled in your test branch. I get the following on
3630 based dm3730.
Regards,
Tony
[ 0.187652] omap_hwmod: uart4: cannot clk_get main_clk uart4_fck
[ 0.187713] omap_hwmod: uart4: cannot _init_clocks
[ 0.187713] ------------[ cut here ]------------
[ 0.187774] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2434 _init+0x6c/0x80()
[ 0.187774] omap_hwmod: uart4: couldn't init clocks
[ 0.187774] Modules linked in:
[ 0.187805] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.187866] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.187896] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.187927] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.187957] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.187988] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c07a4bec>] (_init+0x6c/0x80)
[ 0.188018] [<c07a4bec>] (_init+0x6c/0x80) from [<c002e068>] (omap_hwmod_for_each+0x50/0x64)
[ 0.188049] [<c002e068>] (omap_hwmod_for_each+0x50/0x64) from [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c)
[ 0.188079] [<c07a5440>] (__omap_hwmod_setup_all+0x34/0x4c) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.188110] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.188140] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.188171] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.188201] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.188415] ---[ end trace 1b75b31a2719ed1c ]---
[ 0.810241] ------------[ cut here ]------------
[ 0.810302] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 0.810302] omap_hwmod: timer12: enabled state can only be entered from initialized, idle, or disabled state
[ 0.810333] Modules linked in:
[ 0.810363] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.810394] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.810424] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.810455] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.810485] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.810516] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 0.810546] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 0.810577] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 0.810607] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 0.810638] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.810668] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.810699] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 0.810729] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 0.810760] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c0044954>] (omap_dm_timer_probe+0x234/0x334)
[ 0.810791] [<c0044954>] (omap_dm_timer_probe+0x234/0x334) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 0.810821] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 0.810852] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 0.810852] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 0.810882] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 0.810913] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 0.810943] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 0.810974] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 0.811004] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 0.811035] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 0.811065] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 0.811096] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.811126] ---[ end trace 1b75b31a2719ed1d ]---
[ 0.811889] ------------[ cut here ]------------
[ 0.811920] WARNING: CPU: 0 PID: 46 at arch/arm/mach-omap2/omap_hwmod.c:2224 _idle+0xd4/0xf8()
[ 0.811920] omap_hwmod: timer12: idle state can only be entered from enabled state
[ 0.811950] Modules linked in:
[ 0.811981] CPU: 0 PID: 46 Comm: kworker/0:1 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 0.812011] Workqueue: pm pm_runtime_work
[ 0.812042] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 0.812072] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 0.812103] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 0.812133] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 0.812164] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003099c>] (_idle+0xd4/0xf8)
[ 0.812194] [<c003099c>] (_idle+0xd4/0xf8) from [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c)
[ 0.812225] [<c0030c9c>] (omap_hwmod_idle+0x28/0x3c) from [<c0030e6c>] (omap_device_idle+0x3c/0x80)
[ 0.812225] [<c0030e6c>] (omap_device_idle+0x3c/0x80) from [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c)
[ 0.812255] [<c0030ed0>] (_od_runtime_suspend+0x20/0x2c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 0.812286] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 0.812316] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036e5bc>] (rpm_suspend+0xf4/0x5e4)
[ 0.812347] [<c036e5bc>] (rpm_suspend+0xf4/0x5e4) from [<c036fb78>] (pm_runtime_work+0x80/0xa4)
[ 0.812377] [<c036fb78>] (pm_runtime_work+0x80/0xa4) from [<c0064058>] (process_one_work+0x204/0x594)
[ 0.812408] [<c0064058>] (process_one_work+0x204/0x594) from [<c0064530>] (worker_thread+0x148/0x480)
[ 0.812438] [<c0064530>] (worker_thread+0x148/0x480) from [<c0069c20>] (kthread+0xa0/0xac)
[ 0.812469] [<c0069c20>] (kthread+0xa0/0xac) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 0.812499] ---[ end trace 1b75b31a2719ed1e ]---
[ 2.595031] ------------[ cut here ]------------
[ 2.599945] WARNING: CPU: 0 PID: 1 at arch/arm/mach-omap2/omap_hwmod.c:2126 _enable+0x254/0x280()
[ 2.609313] omap_hwmod: uart4: enabled state can only be entered from initialized, idle, or disabled state
[ 2.619506] Modules linked in:
[ 2.622772] CPU: 0 PID: 1 Comm: swapper/0 Tainted: G W 3.12.0-rc2-00020-gdea1778-dirty #791
[ 2.632537] [<c001cd54>] (unwind_backtrace+0x0/0xf4) from [<c0018e80>] (show_stack+0x14/0x1c)
[ 2.641540] [<c0018e80>] (show_stack+0x14/0x1c) from [<c0554400>] (dump_stack+0x6c/0x9c)
[ 2.650115] [<c0554400>] (dump_stack+0x6c/0x9c) from [<c00488a8>] (warn_slowpath_common+0x64/0x84)
[ 2.659576] [<c00488a8>] (warn_slowpath_common+0x64/0x84) from [<c004895c>] (warn_slowpath_fmt+0x30/0x40)
[ 2.669708] [<c004895c>] (warn_slowpath_fmt+0x30/0x40) from [<c003085c>] (_enable+0x254/0x280)
[ 2.678802] [<c003085c>] (_enable+0x254/0x280) from [<c00308b0>] (omap_hwmod_enable+0x28/0x40)
[ 2.687927] [<c00308b0>] (omap_hwmod_enable+0x28/0x40) from [<c0030f8c>] (omap_device_enable+0x3c/0x80)
[ 2.697875] [<c0030f8c>] (omap_device_enable+0x3c/0x80) from [<c0030fe0>] (_od_runtime_resume+0x10/0x1c)
[ 2.707916] [<c0030fe0>] (_od_runtime_resume+0x10/0x1c) from [<c036e120>] (__rpm_callback+0x2c/0x80)
[ 2.717559] [<c036e120>] (__rpm_callback+0x2c/0x80) from [<c036e198>] (rpm_callback+0x24/0x78)
[ 2.726684] [<c036e198>] (rpm_callback+0x24/0x78) from [<c036f444>] (rpm_resume+0x3c0/0x60c)
[ 2.735595] [<c036f444>] (rpm_resume+0x3c0/0x60c) from [<c036f970>] (__pm_runtime_resume+0x4c/0x68)
[ 2.745178] [<c036f970>] (__pm_runtime_resume+0x4c/0x68) from [<c035ae30>] (serial_omap_probe+0x294/0x4fc)
[ 2.755401] [<c035ae30>] (serial_omap_probe+0x294/0x4fc) from [<c03659ac>] (platform_drv_probe+0x1c/0x24)
[ 2.765502] [<c03659ac>] (platform_drv_probe+0x1c/0x24) from [<c03645e4>] (really_probe+0x70/0x200)
[ 2.775054] [<c03645e4>] (really_probe+0x70/0x200) from [<c03647a8>] (driver_probe_device+0x34/0x50)
[ 2.784729] [<c03647a8>] (driver_probe_device+0x34/0x50) from [<c0364858>] (__driver_attach+0x94/0x98)
[ 2.794555] [<c0364858>] (__driver_attach+0x94/0x98) from [<c0362cd4>] (bus_for_each_dev+0x74/0x98)
[ 2.804138] [<c0362cd4>] (bus_for_each_dev+0x74/0x98) from [<c0363510>] (bus_add_driver+0xe8/0x278)
[ 2.813690] [<c0363510>] (bus_add_driver+0xe8/0x278) from [<c0364e30>] (driver_register+0x5c/0xf8)
[ 2.823181] [<c0364e30>] (driver_register+0x5c/0xf8) from [<c07d0028>] (serial_omap_init+0x28/0x44)
[ 2.832763] [<c07d0028>] (serial_omap_init+0x28/0x44) from [<c00087ac>] (do_one_initcall+0x2c/0x150)
[ 2.842407] [<c00087ac>] (do_one_initcall+0x2c/0x150) from [<c0797508>] (do_basic_setup+0x94/0xd0)
[ 2.851898] [<c0797508>] (do_basic_setup+0x94/0xd0) from [<c07975c0>] (kernel_init_freeable+0x7c/0x120)
[ 2.861846] [<c07975c0>] (kernel_init_freeable+0x7c/0x120) from [<c05526b4>] (kernel_init+0xc/0x164)
[ 2.871490] [<c05526b4>] (kernel_init+0xc/0x164) from [<c00149c8>] (ret_from_fork+0x14/0x2c)
[ 2.880432] ---[ end trace 1b75b31a2719ed1f ]---
next prev parent reply other threads:[~2013-10-07 2:15 UTC|newest]
Thread overview: 68+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-09-25 8:48 [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Tero Kristo
2013-09-25 8:48 ` [PATCHv7 01/36] CLK: TI: Add DPLL clock support Tero Kristo
2013-09-25 8:48 ` [PATCHv7 04/36] CLK: ti: add support for ti divider-clock Tero Kristo
[not found] ` <1380098922-30340-1-git-send-email-t-kristo-l0cyMroinI0@public.gmane.org>
2013-09-25 8:48 ` [PATCHv7 02/36] CLK: TI: add DT alias clock registration mechanism Tero Kristo
2013-09-25 8:48 ` [PATCHv7 03/36] CLK: TI: add autoidle support Tero Kristo
2013-09-25 8:48 ` [PATCHv7 05/36] clk: ti: add support for TI fixed factor clock Tero Kristo
2013-09-25 8:48 ` [PATCHv7 06/36] CLK: TI: add support for OMAP gate clock Tero Kristo
2013-09-25 8:48 ` [PATCHv7 09/36] clk: ti: add mux-gate clock support Tero Kristo
2013-09-25 8:48 ` [PATCHv7 14/36] CLK: TI: add omap5 clock init file Tero Kristo
2013-09-25 8:48 ` [PATCHv7 16/36] ARM: dts: dra7 clock data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 17/36] ARM: dts: clk: Add apll related clocks Tero Kristo
2013-09-25 8:48 ` [PATCHv7 20/36] CLK: TI: DRA7: Add APLL support Tero Kristo
2013-10-08 5:16 ` Mike Turquette
2013-09-25 8:48 ` [PATCHv7 21/36] CLK: TI: add dra7 clock init file Tero Kristo
2013-09-25 8:48 ` [PATCHv7 22/36] ARM: OMAP: DRA7: Enable clock init Tero Kristo
2013-09-25 8:48 ` [PATCHv7 25/36] CLK: TI: add am33xx clock init file Tero Kristo
2013-09-25 8:48 ` [PATCHv7 26/36] ARM: AM33xx: remove old clock data and link in new clock init code Tero Kristo
2013-09-25 8:48 ` [PATCHv7 27/36] CLK: TI: add interface clock support for OMAP3 Tero Kristo
2013-09-25 8:48 ` [PATCHv7 28/36] ARM: OMAP: hwmod: fix an incorrect clk type cast with _get_clkdm Tero Kristo
2013-09-25 8:48 ` [PATCHv7 29/36] ARM: OMAP3: hwmod: initialize clkdm from clkdm_name Tero Kristo
2013-09-25 8:48 ` [PATCHv7 30/36] ARM: dts: omap3 clock data Tero Kristo
2013-09-26 16:06 ` Nishanth Menon
2013-09-26 16:23 ` Nishanth Menon
2013-09-25 8:48 ` [PATCHv7 31/36] CLK: TI: add omap3 clock init file Tero Kristo
2013-09-25 8:48 ` [PATCHv7 34/36] ARM: dts: am43xx clock data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 36/36] CLK: TI: add am43xx clock init file Tero Kristo
2013-09-26 15:21 ` [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Nishanth Menon
2013-09-26 15:29 ` Nishanth Menon
2013-10-04 15:34 ` Tero Kristo
2013-10-07 2:15 ` Tony Lindgren [this message]
2013-10-07 6:35 ` Tero Kristo
2013-10-07 15:41 ` Tony Lindgren
2013-10-07 16:13 ` Nishanth Menon
2013-10-07 19:03 ` Tony Lindgren
[not found] ` <20131007190322.GY8949-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
2013-10-09 18:55 ` Paul Walmsley
2013-10-09 18:59 ` Paul Walmsley
2013-10-09 19:24 ` Tony Lindgren
2013-10-10 7:18 ` Tero Kristo
2013-10-11 17:54 ` Paul Walmsley
2013-10-11 18:23 ` Tero Kristo
2013-10-11 22:26 ` Paul Walmsley
2013-10-11 18:46 ` Tero Kristo
2013-10-11 22:37 ` Paul Walmsley
2013-10-12 10:25 ` Tero Kristo
2013-10-13 23:45 ` Paul Walmsley
2013-10-14 14:57 ` Tero Kristo
2013-10-14 18:27 ` Paul Walmsley
2013-10-14 18:34 ` Tero Kristo
2013-10-09 19:22 ` Tony Lindgren
2013-10-10 8:17 ` Tero Kristo
2013-10-11 22:53 ` Tony Lindgren
2013-09-25 8:48 ` [PATCHv7 07/36] CLK: TI: add support for clockdomain binding Tero Kristo
2013-09-25 8:48 ` [PATCHv7 08/36] ARM: dts: omap4 clock data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 10/36] clk: ti: add support for basic mux clock Tero Kristo
2013-09-25 8:48 ` [PATCHv7 11/36] CLK: TI: add omap4 clock init file Tero Kristo
2013-09-25 8:48 ` [PATCHv7 12/36] ARM: OMAP4: remove old clock data and link in new clock init code Tero Kristo
2013-09-25 8:48 ` [PATCHv7 13/36] ARM: dts: omap5 clock data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 15/36] CLK: TI: omap5: Initialize USB_DPLL at boot Tero Kristo
2013-09-25 8:48 ` [PATCHv7 18/36] ARM: dts: DRA7: Change apll_pcie_m2_ck to fixed factor clock Tero Kristo
2013-09-25 8:48 ` [PATCHv7 19/36] ARM: dts: DRA7: Add PCIe related clock nodes Tero Kristo
2013-09-25 8:48 ` [PATCHv7 23/36] ARM: dts: DRA7: link in clock DT data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 24/36] ARM: dts: am33xx clock data Tero Kristo
2013-09-25 8:48 ` [PATCHv7 32/36] ARM: dts: AM35xx: use DT " Tero Kristo
2013-09-25 8:48 ` [PATCHv7 33/36] ARM: OMAP3: use DT clock init if DT data is available Tero Kristo
2013-09-25 8:48 ` [PATCHv7 35/36] ARM: dts: AM43xx: link in clock DT data Tero Kristo
2013-10-08 5:40 ` [PATCHv7 00/36] ARM: OMAP: clock data conversion to DT Mike Turquette
2013-10-08 8:17 ` Tero Kristo
2013-10-08 16:47 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131007021556.GV8949@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
--cc=mturquette@linaro.org \
--cc=nm@ti.com \
--cc=paul@pwsan.com \
--cc=rnayak@ti.com \
--cc=t-kristo@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).