From: Tony Lindgren <tony@atomide.com>
To: Nishanth Menon <nm@ti.com>
Cc: "Benoît Cousson" <bcousson@baylibre.com>,
"Rajendra Nayak" <rnayak@ti.com>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH] ARM: dts: omap4-panda-es: Do not reset gpio1
Date: Thu, 10 Oct 2013 09:47:02 -0700 [thread overview]
Message-ID: <20131010164702.GF29913@atomide.com> (raw)
In-Reply-To: <1381423481-5920-1-git-send-email-nm@ti.com>
* Nishanth Menon <nm@ti.com> [131010 09:53]:
> Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on
> OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which
> supplies VDD_MPU.
>
> Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because
> MPU voltage switches over to VSET0 voltage value (boot voltage) which
> is not sufficient to operate the device at OPP100.
Is this needs as a fix for the -rc series?
Tony
> Signed-off-by: Nishanth Menon <nm@ti.com>
> ---
> As explained here: http://marc.info/?l=u-boot&m=133066647800872&w=2
>
> GPIO1 reset causes PandaBoard-ES to stop functioning.
> This depends on Patch series from Rajendra:
> http://marc.info/?l=linux-doc&m=138131355520116&w=2
> Applies on Benoit's for_13/dts branch:
> https://git.kernel.org/cgit/linux/kernel/git/bcousson/linux-omap-dt.git/log/?h=for_3.13/dts
>
> Tested on PandaBoard-ES without the u-boot uenv hack
>
> arch/arm/boot/dts/omap4-panda-es.dts | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap4-panda-es.dts b/arch/arm/boot/dts/omap4-panda-es.dts
> index 56c4354..816d1c9 100644
> --- a/arch/arm/boot/dts/omap4-panda-es.dts
> +++ b/arch/arm/boot/dts/omap4-panda-es.dts
> @@ -62,3 +62,7 @@
> gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
> };
> };
> +
> +&gpio1 {
> + ti,no-reset-on-init;
> +};
> --
> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
next prev parent reply other threads:[~2013-10-10 16:47 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-09 10:11 [PATCH v2 0/5] OMAP: Add DT bindings to specify when devices should not be idled or reset Rajendra Nayak
2013-10-09 10:11 ` [PATCH v2 1/5] ARM: OMAP2+: hwmod: cleanup HWMOD_INIT_NO_RESET usage Rajendra Nayak
2013-10-09 14:55 ` Paul Walmsley
2013-10-09 10:11 ` [PATCH v2 2/5] ARM: dts: omap: Add new bindings for OMAP Rajendra Nayak
2013-10-09 15:13 ` Benoit Cousson
2013-10-09 16:41 ` Rajendra Nayak
2013-10-09 16:45 ` Benoit Cousson
2013-10-15 7:27 ` Benoit Cousson
2013-10-15 8:23 ` Rajendra Nayak
2013-10-09 10:11 ` [PATCH v2 3/5] ARM: OMAP2+: hwmod: Extract no-idle and no-reset info from DT Rajendra Nayak
2013-10-09 14:55 ` Paul Walmsley
2013-10-09 10:12 ` [PATCH v2 4/5] ARM: OMAP2+: hwmod: Cleanup usage of HWMOD_INIT_NO_RESET and HWMOD_INIT_NO_IDLE Rajendra Nayak
2013-10-09 10:12 ` [PATCH v2 5/5] ARM: dts: AM335x-evmsk: Do not reset gpio0 Rajendra Nayak
2013-10-10 16:44 ` [PATCH] ARM: dts: omap4-panda-es: Do not reset gpio1 Nishanth Menon
2013-10-10 16:47 ` Tony Lindgren [this message]
2013-10-10 19:01 ` Nishanth Menon
2013-10-15 7:28 ` Benoit Cousson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131010164702.GF29913@atomide.com \
--to=tony@atomide.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=nm@ti.com \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).