Re: [RFR 2/2] drm/panel: Add simple panel support

[Thierry Reding <thierry.reding-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 4135 bytes --]

On Thu, Oct 17, 2013 at 02:23:32PM +0200, Laurent Pinchart wrote:
> Hi Thierry,
> 
> On Thursday 17 October 2013 14:06:47 Thierry Reding wrote:
> > On Thu, Oct 17, 2013 at 01:15:22PM +0200, Laurent Pinchart wrote:
> > > On Thursday 17 October 2013 13:05:18 Thierry Reding wrote:
> > > > On Thu, Oct 17, 2013 at 01:22:21PM +0300, Tomi Valkeinen wrote:
> > > > > On 17/10/13 11:53, Thierry Reding wrote:
> > > > > > I keep wondering why we absolutely must have compatibility between
> > > > > > CDF and this simple panel binding. DT content is supposed to concern
> > > > > > itself with the description of hardware only. What about the
> > > > > > following isn't an accurate description of the panel hardware?
> > > > > > 
> > > > > > 	panel: panel {
> > > > > > 		compatible = "cptt,claa101wb01";
> > > > > > 		
> > > > > > 		power-supply = <&vdd_pnl_reg>;
> > > > > > 		enable-gpios = <&gpio 90 0>;
> > > > > > 		
> > > > > > 		backlight = <&backlight>;
> > > > > > 	};
> > > > > > 	
> > > > > > 	dsi-controller {
> > > > > > 		panel = <&panel>;
> > > > > > 	};
> > > > > 
> > > > > That's quite similar to how my current out-of-mainline OMAP DSS DT
> > > > > bindings work. The difference is that I have a reference from the
> > > > > panel node to the video source (dsi-controller), instead of the other
> > > > > way around. I just find it more natural. It works the same way as,
> > > > > say, regulators, gpios, etc.
> > > > 
> > > > I suppose that depends on the way you look at it. In the above proposal
> > > > I consider the output (DSI controller) to use the panel as a resource
> > > > that provides a certain set of services (query mode timings, provide a
> > > > way to enable or disable the panel). Similarly the panel uses the
> > > > backlight as a resource that provides a certain set of services (such as
> > > > changing the brightness).
> > > > 
> > > > The above also follows the natural order of control. The panel has no
> > > > way to control the DSI output. However, it is the output that controls
> > > > when a panel is required and turn it on as appropriate.
> > > 
> > > I'm no DSI expert, but I know enough about it to be sure that Tomi will
> > > disagree. DSI panels can have complex power sequences that require the
> > > input stream to be finely controlled (for instance it might require a
> > > clock without video frames for some time, switch a GPIO or regulator,
> > > send a command to the panel, and then only get video frames). For that
> > > reason all developers I've talked to who have an in-depth knowledge of
> > > DSI and DSI panels told me that the panel needs to control the video bus,
> > > and request the video source to start/stop the video stream.
> > 
> > Oh, I'm very well aware of the various flavours of funkiness that DSI
> > panels come in. But it's wrong to say that the panel needs to control
> > the video bus. There's simply no way that a panel can actually do that.
> > It is true, however, that in order to make this work in a maintainable
> > fashion, the DSI panel *driver* may need to control the DSI bus. That's
> > an entirely different story.
> 
> Sure, but I don't think that's really related to the DT bindings. We don't 
> have to model every electrical signal in a detailed way that matches the 
> direction of the electrons flow :-) What we need to model is a connection 
> between a display controller and a panel (possibly with a direction). What I'd 
> like to do is to express that link in a way that can also express more complex 
> pipeline topologies. I don't want to make it overly complex, I had hoped that 
> my DT bindings proposal would be a good approach as it's both generic and 
> still pretty simple.

I get that, and for what it's worth I do think that your proposal looks
simple enough and if it can solve any of the problem you're facing with
CDF, then that's great.

But I don't think we should force inclusion of these properties on every
panel, even if it doesn't use any of the graph functionality. Is there
any problem with making them optional?

Thierry

[-- Attachment #2: Type: application/pgp-signature, Size: 836 bytes --]