From mboxrd@z Thu Jan 1 00:00:00 1970 From: Mark Rutland Subject: Re: [RFC v2 PATCH 12/14] Documentation: Add st_gyro binding documentation Date: Mon, 21 Oct 2013 12:19:14 +0100 Message-ID: <20131021111914.GC8144@kartoffel> References: <1380299538-22047-1-git-send-email-l.czerwinski@samsung.com> <1380299538-22047-13-git-send-email-l.czerwinski@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Return-path: Content-Disposition: inline In-Reply-To: <1380299538-22047-13-git-send-email-l.czerwinski-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Lukasz Czerwinski Cc: "jic23-KWPb1pKIrIJaa/9Udqfwiw@public.gmane.org" , "denis.ciocca-qxv4g6HH51o@public.gmane.org" , "linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" , "lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org" , "devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org" List-Id: devicetree@vger.kernel.org On Fri, Sep 27, 2013 at 05:32:16PM +0100, Lukasz Czerwinski wrote: > This patch adds the document for STMicroeletronics Angular Velocity Sensors > driver under Documentation/devicetree/bindings/iio/. > > Signed-off-by: Lukasz Czerwinski > Signed-off-by: Kyungmin Park > --- > .../bindings/iio/gyroscope/st_gyroscope.txt | 38 ++++++++++++++++++++ > 1 file changed, 38 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > > diff --git a/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt b/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > new file mode 100644 > index 0000000..8a6a9be > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/gyroscope/st_gyroscope.txt > @@ -0,0 +1,38 @@ > +STMicroelectronics Angular Velocity Sensors > + > +Required properties: > + > + - compatible : value should be one of the following: > + (a) "st,l3g4200d" for gyroscope in L3G4200D > + (b) "st,lsm330d-gyro" for gyroscope in LSM330D > + (c) "st,lsm330dl-gyro" for gyroscope in LSM330DL > + (d) "st,lsm330dlc-gyro" for gyroscope in LSM330DLC > + (e) "st,l3gd20" for gyroscope in L3GD20 > + (f) "st,l3gd20h" for gyroscope in L3GD20H > + (g) "st,l3g4is-ui" for gyroscope in L3G4IS > + (h) "st,lsm330-gyro" for gyroscope in LSM330 > + > + - reg : the I2C address of the gyroscope > + > +Optional properties: > + > + - st,drdy-int-pin : redirect DRDY on pin INT1 (1) or pin INT2 (2) (u8) > + > + - interrupts : Interrupt numbers for the ST gyroscopes, as an array > + in case the gyroscope have more interrupt lines: > + , > + ; > + > + - interrupt-names : Array of strings associated with the interrupt numbers All my comments from patch 11 apply here too. Mark.