[PATCH 0/3] thermal: bcm281xx: Add Temperature Monitor driver

[PATCH 0/3] thermal: bcm281xx: Add Temperature Monitor driver

[Wendy Ng]

This patch series adds the support of the Temperature Monitor driver
for Broadcom bcm281xx SoCs. This TMON driver can be used with the
Thermal Framework.

This patch series incoporates the feedback from the old series:
V1: https://lkml.org/lkml/2013/9/23/424
V2: https://lkml.org/lkml/2013/9/27/555

Note that this patch series is dependent on the following patches:
https://lkml.org/lkml/2013/9/26/787
http://www.spinics.net/lists/arm-kernel/msg274963.html
https://lkml.org/lkml/2013/10/3/645

Wendy Ng (3):
  thermal: bcm281xx: Add Temperature Monitor driver
  ARM: configs:enable thermal framework for bcm281xx
  ARM: dts: Add TMON driver support to bcm281xx

 .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
 arch/arm/boot/dts/bcm11351-brt.dts                 |    4 +
 arch/arm/boot/dts/bcm11351.dtsi                    |   29 ++++
 arch/arm/boot/dts/bcm28155-ap.dts                  |    4 +
 arch/arm/configs/bcm_defconfig                     |    4 +-
 drivers/thermal/Kconfig                            |   11 ++
 drivers/thermal/Makefile                           |    1 +
 drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
 8 files changed, 249 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
 create mode 100644 drivers/thermal/bcm_kona_tmon.c

-- 
1.7.9.5

[PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Wendy Ng]

This adds the support for Temperature Monitor (TMON) driver for
Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.

Note that this version of the TMON driver does support interrupt-driven
mode -- only polling-mode of the thermal framework can be used.

Signed-off-by: Wendy Ng <wendy.ng@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
---
 .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
 drivers/thermal/Kconfig                            |   11 ++
 drivers/thermal/Makefile                           |    1 +
 drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
 4 files changed, 209 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
 create mode 100644 drivers/thermal/bcm_kona_tmon.c

diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
new file mode 100644
index 0000000..225b898
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
@@ -0,0 +1,24 @@
+* Broadcom Kona TMON bindings
+
+This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
+block in a Kona SoC device is used to measure the chip temperature at constant
+intervals.
+The TMON block asserts an interrupt if temperature exceeds a user programmed
+threshold value.  The TMON block would reset the entire device once it
+reaches a critical temperature which is also a programmable setting.
+
+Required properties:
+- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
+- reg : Address range of the thermal register
+- clocks : the clock signal that drives the TMON block
+- interrupts: the interrupt signal associated with the TMON block
+
+
+Example:
+	tmon@34008000 {
+		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
+		reg = <0x34008000 0x0024>;
+		clocks = <&tmon_1m_clk>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+	};
diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
index 9e7cc3f..02200ad 100644
--- a/drivers/thermal/Kconfig
+++ b/drivers/thermal/Kconfig
@@ -166,6 +166,17 @@ config DB8500_THERMAL
 	  created. Cooling devices can be bound to the trip points to cool this
 	  thermal zone if trip points reached.
 
+config BCM_KONA_TMON_THERMAL
+	tristate "Temperature Monitor driver on Broadcom Kona family of SoCs"
+	depends on ARCH_BCM_MOBILE
+	depends on THERMAL_OF
+	default y
+	help
+	  If you say yes here you get support for the TMON
+	  (Temperature Monitor) in Broadcom Kona family of SoCs.
+	  This also provides the generic support of the Thermal Framework
+	  for Broadcom Kona family of SoCs.
+
 config ARMADA_THERMAL
 	tristate "Armada 370/XP thermal management"
 	depends on ARCH_MVEBU
diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
index 4b03956..5e85354 100644
--- a/drivers/thermal/Makefile
+++ b/drivers/thermal/Makefile
@@ -22,6 +22,7 @@ obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
 obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
 obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
 obj-y				+= samsung/
+obj-$(CONFIG_BCM_KONA_TMON_THERMAL)	+= bcm_kona_tmon.o
 obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
 obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
 obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
diff --git a/drivers/thermal/bcm_kona_tmon.c b/drivers/thermal/bcm_kona_tmon.c
new file mode 100644
index 0000000..69ae0b2
--- /dev/null
+++ b/drivers/thermal/bcm_kona_tmon.c
@@ -0,0 +1,173 @@
+/*
+ * Copyright 2013 Broadcom Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2,
+ * as published by the Free Software Foundation (the "GPL").
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php,
+ * or by writing to the Free Software Foundation, Inc.,
+ * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ */
+
+/**
+*  Broadcom Kona Temperature Monitor (TMON) driver
+*
+*  Note: The TMON hardware monitors a single sensor.
+*/
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/thermal.h>
+
+
+/* From TMON Register Database */
+#define TMON_TEMP_VAL_OFFSET			0x0000001c
+#define TMON_TEMP_VAL_TEMP_VAL_SHIFT		0
+#define TMON_TEMP_VAL_TEMP_VAL_MASK		0x000003ff
+
+/* Broadcom TMON Private Data Structure */
+struct bcm_tmon_data_priv {
+	void __iomem *base;
+	struct clk *external_clk;
+	struct thermal_zone_device *therm_dev;
+};
+
+/* Temperature conversion function for TMON block */
+static long raw_to_mcelsius(u32 raw)
+{
+	/*
+	 * According to Broadcom internal Analog Module Specification
+	 * the formula for converting TMON block output to temperature in
+	 * degree Celsius is:
+	 *	T = 428 - (0.561 * raw)
+	 * Note: the valid operating range for the TMON block is -40C to 125C
+	 */
+	return 428000 - (561 * (long)raw);
+}
+
+/* Get temperature callback function for thermal zone */
+static int bcm_get_temp(void *sensor_data, long *temp)
+{
+	u32 raw;
+	long mcelsius;
+	struct bcm_tmon_data_priv *priv = sensor_data;
+
+	if (!priv) {
+		pr_err("%s: input sensor_data not initialized.\n", __func__);
+		return -EINVAL;
+	}
+
+	raw = (readl(priv->base + TMON_TEMP_VAL_OFFSET)
+		& TMON_TEMP_VAL_TEMP_VAL_MASK) >> TMON_TEMP_VAL_TEMP_VAL_SHIFT;
+
+	pr_debug("%s: raw temp 0x%x\n", __func__, raw);
+
+	mcelsius = raw_to_mcelsius(raw);
+
+	/*
+	 * Since 'mcelsius' might be negative, we need to limit it to smallest
+	 * unsigned value before returning it to thermal framework.
+	 */
+	if (mcelsius < 0)
+		*temp = 0;
+	else
+		*temp = mcelsius;
+
+	pr_debug("%s: final temp %d\n", __func__, (int) *temp);
+
+	return 0;
+}
+
+static const struct of_device_id bcm_kona_tmon_match_table[] = {
+	{ .compatible = "brcm,kona-tmon" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, bcm_kona_tmon_match_table);
+
+static int bcm_kona_tmon_probe(struct platform_device *pdev)
+{
+	struct thermal_zone_device *thermal = NULL;
+	struct bcm_tmon_data_priv *priv;
+	struct resource *res;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv) {
+		dev_err(&pdev->dev, "Failed to malloc priv.\n");
+		return -ENOMEM;
+	}
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	priv->external_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(priv->external_clk))
+		return -ENODEV;
+
+	if (clk_prepare_enable(priv->external_clk) != 0)
+		return -EINVAL;
+
+	/*
+	 * Note that get_trend() function is NULL.  This is OK for now as
+	 * we can rely on the get_tz_trend() from the Thermal Framework until
+	 * we come up with a better way to determine the trend.
+	 */
+	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
+						bcm_get_temp, NULL);
+
+	if (IS_ERR(thermal)) {
+		dev_err(&pdev->dev, "Failed to register BCM Kona TMON.\n");
+		clk_disable_unprepare(priv->external_clk);
+		return PTR_ERR(thermal);
+	}
+
+	priv->therm_dev = thermal;
+
+	platform_set_drvdata(pdev, priv);
+
+	dev_info(&pdev->dev, "BCM Kona TMON Initialized.\n");
+
+	return 0;
+}
+
+static int bcm_kona_tmon_remove(struct platform_device *pdev)
+{
+	struct bcm_tmon_data_priv *priv = platform_get_drvdata(pdev);
+
+	thermal_zone_of_sensor_unregister(&pdev->dev, priv->therm_dev);
+
+	clk_disable_unprepare(priv->external_clk);
+
+	dev_info(&pdev->dev, "BCM Kona TMON Uninitialized.\n");
+
+	return 0;
+}
+
+static struct platform_driver bcm_kona_tmon_driver = {
+	.driver = {
+		.name = "bcm-kona-tmon",
+		.owner = THIS_MODULE,
+		.of_match_table = bcm_kona_tmon_match_table,
+	},
+	.probe = bcm_kona_tmon_probe,
+	.remove = bcm_kona_tmon_remove,
+};
+
+module_platform_driver(bcm_kona_tmon_driver);
+
+MODULE_DESCRIPTION("Broadcom Kona Temperature Monitor Driver");
+MODULE_AUTHOR("Broadcom Corporation");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:bcm-kona-tmon");
-- 
1.7.9.5

Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Kumar Gala]

On Oct 25, 2013, at 7:00 PM, Wendy Ng wrote:

> This adds the support for Temperature Monitor (TMON) driver for
> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
> 
> Note that this version of the TMON driver does support interrupt-driven
> mode -- only polling-mode of the thermal framework can be used.
> 
> Signed-off-by: Wendy Ng <wendy.ng@broadcom.com>
> Reviewed-by: Markus Mayer <mmayer@broadcom.com>
> Reviewed-by: Christian Daudt <csd@broadcom.com>
> Reviewed-by: Matt Porter <matt.porter@linaro.org>
> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
> ---
> .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
> drivers/thermal/Kconfig                            |   11 ++
> drivers/thermal/Makefile                           |    1 +
> drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
> 4 files changed, 209 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> create mode 100644 drivers/thermal/bcm_kona_tmon.c
> 
> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> new file mode 100644
> index 0000000..225b898
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> @@ -0,0 +1,24 @@
> +* Broadcom Kona TMON bindings
> +
> +This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
> +block in a Kona SoC device is used to measure the chip temperature at constant
> +intervals.
> +The TMON block asserts an interrupt if temperature exceeds a user programmed
> +threshold value.  The TMON block would reset the entire device once it
> +reaches a critical temperature which is also a programmable setting.
> +
> +Required properties:
> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
> +- reg : Address range of the thermal register
> +- clocks : the clock signal that drives the TMON block
> +- interrupts: the interrupt signal associated with the TMON block
> +
> +
> +Example:
> +	tmon@34008000 {
> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
> +		reg = <0x34008000 0x0024>;
> +		clocks = <&tmon_1m_clk>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		status = "disabled";

I'd remove the 'status' line from an example.

> +	};

Ack on the binding (beyond my minor nit pick on the status prop).

Acked-by: Kumar Gala <galak@codeaurora.org>

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Kumar Gala]

On Oct 26, 2013, at 1:46 AM, Kumar Gala wrote:

> 
> On Oct 25, 2013, at 7:00 PM, Wendy Ng wrote:
> 
>> This adds the support for Temperature Monitor (TMON) driver for
>> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
>> 
>> Note that this version of the TMON driver does support interrupt-driven
>> mode -- only polling-mode of the thermal framework can be used.
>> 
>> Signed-off-by: Wendy Ng <wendy.ng@broadcom.com>
>> Reviewed-by: Markus Mayer <mmayer@broadcom.com>
>> Reviewed-by: Christian Daudt <csd@broadcom.com>
>> Reviewed-by: Matt Porter <matt.porter@linaro.org>
>> Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
>> ---
>> .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
>> drivers/thermal/Kconfig                            |   11 ++
>> drivers/thermal/Makefile                           |    1 +
>> drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
>> 4 files changed, 209 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>> create mode 100644 drivers/thermal/bcm_kona_tmon.c
>> 
>> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>> new file mode 100644
>> index 0000000..225b898
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>> @@ -0,0 +1,24 @@
>> +* Broadcom Kona TMON bindings
>> +
>> +This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
>> +block in a Kona SoC device is used to measure the chip temperature at constant
>> +intervals.
>> +The TMON block asserts an interrupt if temperature exceeds a user programmed
>> +threshold value.  The TMON block would reset the entire device once it
>> +reaches a critical temperature which is also a programmable setting.
>> +
>> +Required properties:
>> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
>> +- reg : Address range of the thermal register
>> +- clocks : the clock signal that drives the TMON block
>> +- interrupts: the interrupt signal associated with the TMON block
>> +
>> +
>> +Example:
>> +	tmon@34008000 {
>> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
>> +		reg = <0x34008000 0x0024>;
>> +		clocks = <&tmon_1m_clk>;
>> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>> +		status = "disabled";
> 
> I'd remove the 'status' line from an example.
> 
>> +	};
> 
> Ack on the binding (beyond my minor nit pick on the status prop).
> 
> Acked-by: Kumar Gala <galak@codeaurora.org>
> 
> - k


After looking at your .dts{i} I see you've got a #thermal-sensor-cells prop, where is that documented?

- k

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Matt Porter]

On Sat, Oct 26, 2013 at 01:47:40AM -0500, Kumar Gala wrote:
> 
> On Oct 26, 2013, at 1:46 AM, Kumar Gala wrote:
> 
> > 
> > On Oct 25, 2013, at 7:00 PM, Wendy Ng wrote:
> > 
> >> This adds the support for Temperature Monitor (TMON) driver for
> >> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
> >> 
> >> Note that this version of the TMON driver does support interrupt-driven
> >> mode -- only polling-mode of the thermal framework can be used.
> >> 
> >> Signed-off-by: Wendy Ng <wendy.ng-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> >> Reviewed-by: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> >> Reviewed-by: Christian Daudt <csd-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> >> Reviewed-by: Matt Porter <matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> >> Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> >> ---
> >> .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
> >> drivers/thermal/Kconfig                            |   11 ++
> >> drivers/thermal/Makefile                           |    1 +
> >> drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
> >> 4 files changed, 209 insertions(+)
> >> create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> >> create mode 100644 drivers/thermal/bcm_kona_tmon.c
> >> 
> >> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> >> new file mode 100644
> >> index 0000000..225b898
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> >> @@ -0,0 +1,24 @@
> >> +* Broadcom Kona TMON bindings
> >> +
> >> +This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
> >> +block in a Kona SoC device is used to measure the chip temperature at constant
> >> +intervals.
> >> +The TMON block asserts an interrupt if temperature exceeds a user programmed
> >> +threshold value.  The TMON block would reset the entire device once it
> >> +reaches a critical temperature which is also a programmable setting.
> >> +
> >> +Required properties:
> >> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
> >> +- reg : Address range of the thermal register
> >> +- clocks : the clock signal that drives the TMON block
> >> +- interrupts: the interrupt signal associated with the TMON block
> >> +
> >> +
> >> +Example:
> >> +	tmon@34008000 {
> >> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
> >> +		reg = <0x34008000 0x0024>;
> >> +		clocks = <&tmon_1m_clk>;
> >> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> >> +		status = "disabled";
> > 
> > I'd remove the 'status' line from an example.
> > 
> >> +	};
> > 
> > Ack on the binding (beyond my minor nit pick on the status prop).
> > 
> > Acked-by: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
> > 
> > - k
> 
> 
> After looking at your .dts{i} I see you've got a #thermal-sensor-cells prop, where is that documented?

It's in Eduardo's "device thermal limits represented in device tree
nodes" series. Here's the direct link to the binding post/discussion
https://lkml.org/lkml/2013/9/26/772

-Matt
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Kumar Gala]

On Oct 26, 2013, at 7:45 AM, Matt Porter wrote:

> On Sat, Oct 26, 2013 at 01:47:40AM -0500, Kumar Gala wrote:
>> 
>> On Oct 26, 2013, at 1:46 AM, Kumar Gala wrote:
>> 
>>> 
>>> On Oct 25, 2013, at 7:00 PM, Wendy Ng wrote:
>>> 
>>>> This adds the support for Temperature Monitor (TMON) driver for
>>>> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
>>>> 
>>>> Note that this version of the TMON driver does support interrupt-driven
>>>> mode -- only polling-mode of the thermal framework can be used.
>>>> 
>>>> Signed-off-by: Wendy Ng <wendy.ng-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>>>> Reviewed-by: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>>>> Reviewed-by: Christian Daudt <csd-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
>>>> Reviewed-by: Matt Porter <matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>>> Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
>>>> ---
>>>> .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
>>>> drivers/thermal/Kconfig                            |   11 ++
>>>> drivers/thermal/Makefile                           |    1 +
>>>> drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
>>>> 4 files changed, 209 insertions(+)
>>>> create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>> create mode 100644 drivers/thermal/bcm_kona_tmon.c
>>>> 
>>>> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>> new file mode 100644
>>>> index 0000000..225b898
>>>> --- /dev/null
>>>> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>>>> @@ -0,0 +1,24 @@
>>>> +* Broadcom Kona TMON bindings
>>>> +
>>>> +This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
>>>> +block in a Kona SoC device is used to measure the chip temperature at constant
>>>> +intervals.
>>>> +The TMON block asserts an interrupt if temperature exceeds a user programmed
>>>> +threshold value.  The TMON block would reset the entire device once it
>>>> +reaches a critical temperature which is also a programmable setting.
>>>> +
>>>> +Required properties:
>>>> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
>>>> +- reg : Address range of the thermal register
>>>> +- clocks : the clock signal that drives the TMON block
>>>> +- interrupts: the interrupt signal associated with the TMON block
>>>> +
>>>> +
>>>> +Example:
>>>> +	tmon@34008000 {
>>>> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
>>>> +		reg = <0x34008000 0x0024>;
>>>> +		clocks = <&tmon_1m_clk>;
>>>> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
>>>> +		status = "disabled";
>>> 
>>> I'd remove the 'status' line from an example.
>>> 
>>>> +	};
>>> 
>>> Ack on the binding (beyond my minor nit pick on the status prop).
>>> 
>>> Acked-by: Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>
>>> 
>>> - k
>> 
>> 
>> After looking at your .dts{i} I see you've got a #thermal-sensor-cells prop, where is that documented?
> 
> It's in Eduardo's "device thermal limits represented in device tree
> nodes" series. Here's the direct link to the binding post/discussion
> https://lkml.org/lkml/2013/9/26/772
> 
> -Matt

Than as you mentioned in another thread, we should have a reference to that binding in this one.

- k


-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 1/3] thermal: bcm281xx: Add Temperature Monitor driver

[Grant Likely]

On Fri, 25 Oct 2013 17:00:27 -0700, "Wendy Ng" <wendy.ng-dY08KVG/lbpWk0Htik3J/w@public.gmane.org> wrote:
> This adds the support for Temperature Monitor (TMON) driver for
> Broadcom bcm281xx SoCs. This driver plugs into the Thermal Framework.
> 
> Note that this version of the TMON driver does support interrupt-driven
> mode -- only polling-mode of the thermal framework can be used.
> 
> Signed-off-by: Wendy Ng <wendy.ng-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Christian Daudt <csd-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
> Reviewed-by: Matt Porter <matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  .../bindings/thermal/bcm-kona-thermal.txt          |   24 +++
>  drivers/thermal/Kconfig                            |   11 ++
>  drivers/thermal/Makefile                           |    1 +
>  drivers/thermal/bcm_kona_tmon.c                    |  173 ++++++++++++++++++++
>  4 files changed, 209 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
>  create mode 100644 drivers/thermal/bcm_kona_tmon.c
> 
> diff --git a/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> new file mode 100644
> index 0000000..225b898
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/bcm-kona-thermal.txt
> @@ -0,0 +1,24 @@
> +* Broadcom Kona TMON bindings
> +
> +This version is for the Kona family of SoCs.  The TMON (Temperature Monitor)
> +block in a Kona SoC device is used to measure the chip temperature at constant
> +intervals.
> +The TMON block asserts an interrupt if temperature exceeds a user programmed
> +threshold value.  The TMON block would reset the entire device once it
> +reaches a critical temperature which is also a programmable setting.
> +
> +Required properties:
> +- compatible : "brcm,bcm11351-tmon", "brcm,kona-tmon"
> +- reg : Address range of the thermal register
> +- clocks : the clock signal that drives the TMON block
> +- interrupts: the interrupt signal associated with the TMON block
> +
> +
> +Example:
> +	tmon@34008000 {
> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
> +		reg = <0x34008000 0x0024>;
> +		clocks = <&tmon_1m_clk>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		status = "disabled";

I would drop the status="disabled" from the example, but otherwise the
binding looks fine.

g.

> +	};
> diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig
> index 9e7cc3f..02200ad 100644
> --- a/drivers/thermal/Kconfig
> +++ b/drivers/thermal/Kconfig
> @@ -166,6 +166,17 @@ config DB8500_THERMAL
>  	  created. Cooling devices can be bound to the trip points to cool this
>  	  thermal zone if trip points reached.
>  
> +config BCM_KONA_TMON_THERMAL
> +	tristate "Temperature Monitor driver on Broadcom Kona family of SoCs"
> +	depends on ARCH_BCM_MOBILE
> +	depends on THERMAL_OF
> +	default y
> +	help
> +	  If you say yes here you get support for the TMON
> +	  (Temperature Monitor) in Broadcom Kona family of SoCs.
> +	  This also provides the generic support of the Thermal Framework
> +	  for Broadcom Kona family of SoCs.
> +
>  config ARMADA_THERMAL
>  	tristate "Armada 370/XP thermal management"
>  	depends on ARCH_MVEBU
> diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile
> index 4b03956..5e85354 100644
> --- a/drivers/thermal/Makefile
> +++ b/drivers/thermal/Makefile
> @@ -22,6 +22,7 @@ obj-$(CONFIG_SPEAR_THERMAL)	+= spear_thermal.o
>  obj-$(CONFIG_RCAR_THERMAL)	+= rcar_thermal.o
>  obj-$(CONFIG_KIRKWOOD_THERMAL)  += kirkwood_thermal.o
>  obj-y				+= samsung/
> +obj-$(CONFIG_BCM_KONA_TMON_THERMAL)	+= bcm_kona_tmon.o
>  obj-$(CONFIG_DOVE_THERMAL)  	+= dove_thermal.o
>  obj-$(CONFIG_DB8500_THERMAL)	+= db8500_thermal.o
>  obj-$(CONFIG_ARMADA_THERMAL)	+= armada_thermal.o
> diff --git a/drivers/thermal/bcm_kona_tmon.c b/drivers/thermal/bcm_kona_tmon.c
> new file mode 100644
> index 0000000..69ae0b2
> --- /dev/null
> +++ b/drivers/thermal/bcm_kona_tmon.c
> @@ -0,0 +1,173 @@
> +/*
> + * Copyright 2013 Broadcom Corporation.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License, version 2,
> + * as published by the Free Software Foundation (the "GPL").
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + *
> + * A copy of the GPL is available at http://www.broadcom.com/licenses/GPLv2.php,
> + * or by writing to the Free Software Foundation, Inc.,
> + * 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
> + */
> +
> +/**
> +*  Broadcom Kona Temperature Monitor (TMON) driver
> +*
> +*  Note: The TMON hardware monitors a single sensor.
> +*/
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/thermal.h>
> +
> +
> +/* From TMON Register Database */
> +#define TMON_TEMP_VAL_OFFSET			0x0000001c
> +#define TMON_TEMP_VAL_TEMP_VAL_SHIFT		0
> +#define TMON_TEMP_VAL_TEMP_VAL_MASK		0x000003ff
> +
> +/* Broadcom TMON Private Data Structure */
> +struct bcm_tmon_data_priv {
> +	void __iomem *base;
> +	struct clk *external_clk;
> +	struct thermal_zone_device *therm_dev;
> +};
> +
> +/* Temperature conversion function for TMON block */
> +static long raw_to_mcelsius(u32 raw)
> +{
> +	/*
> +	 * According to Broadcom internal Analog Module Specification
> +	 * the formula for converting TMON block output to temperature in
> +	 * degree Celsius is:
> +	 *	T = 428 - (0.561 * raw)
> +	 * Note: the valid operating range for the TMON block is -40C to 125C
> +	 */
> +	return 428000 - (561 * (long)raw);
> +}
> +
> +/* Get temperature callback function for thermal zone */
> +static int bcm_get_temp(void *sensor_data, long *temp)
> +{
> +	u32 raw;
> +	long mcelsius;
> +	struct bcm_tmon_data_priv *priv = sensor_data;
> +
> +	if (!priv) {
> +		pr_err("%s: input sensor_data not initialized.\n", __func__);
> +		return -EINVAL;
> +	}
> +
> +	raw = (readl(priv->base + TMON_TEMP_VAL_OFFSET)
> +		& TMON_TEMP_VAL_TEMP_VAL_MASK) >> TMON_TEMP_VAL_TEMP_VAL_SHIFT;
> +
> +	pr_debug("%s: raw temp 0x%x\n", __func__, raw);
> +
> +	mcelsius = raw_to_mcelsius(raw);
> +
> +	/*
> +	 * Since 'mcelsius' might be negative, we need to limit it to smallest
> +	 * unsigned value before returning it to thermal framework.
> +	 */
> +	if (mcelsius < 0)
> +		*temp = 0;
> +	else
> +		*temp = mcelsius;
> +
> +	pr_debug("%s: final temp %d\n", __func__, (int) *temp);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id bcm_kona_tmon_match_table[] = {
> +	{ .compatible = "brcm,kona-tmon" },
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, bcm_kona_tmon_match_table);
> +
> +static int bcm_kona_tmon_probe(struct platform_device *pdev)
> +{
> +	struct thermal_zone_device *thermal = NULL;
> +	struct bcm_tmon_data_priv *priv;
> +	struct resource *res;
> +
> +	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
> +	if (!priv) {
> +		dev_err(&pdev->dev, "Failed to malloc priv.\n");
> +		return -ENOMEM;
> +	}
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	priv->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(priv->base))
> +		return PTR_ERR(priv->base);
> +
> +	priv->external_clk = devm_clk_get(&pdev->dev, NULL);
> +	if (IS_ERR(priv->external_clk))
> +		return -ENODEV;
> +
> +	if (clk_prepare_enable(priv->external_clk) != 0)
> +		return -EINVAL;
> +
> +	/*
> +	 * Note that get_trend() function is NULL.  This is OK for now as
> +	 * we can rely on the get_tz_trend() from the Thermal Framework until
> +	 * we come up with a better way to determine the trend.
> +	 */
> +	thermal = thermal_zone_of_sensor_register(&pdev->dev, 0, priv,
> +						bcm_get_temp, NULL);
> +
> +	if (IS_ERR(thermal)) {
> +		dev_err(&pdev->dev, "Failed to register BCM Kona TMON.\n");
> +		clk_disable_unprepare(priv->external_clk);
> +		return PTR_ERR(thermal);
> +	}
> +
> +	priv->therm_dev = thermal;
> +
> +	platform_set_drvdata(pdev, priv);
> +
> +	dev_info(&pdev->dev, "BCM Kona TMON Initialized.\n");
> +
> +	return 0;
> +}
> +
> +static int bcm_kona_tmon_remove(struct platform_device *pdev)
> +{
> +	struct bcm_tmon_data_priv *priv = platform_get_drvdata(pdev);
> +
> +	thermal_zone_of_sensor_unregister(&pdev->dev, priv->therm_dev);
> +
> +	clk_disable_unprepare(priv->external_clk);
> +
> +	dev_info(&pdev->dev, "BCM Kona TMON Uninitialized.\n");
> +
> +	return 0;
> +}
> +
> +static struct platform_driver bcm_kona_tmon_driver = {
> +	.driver = {
> +		.name = "bcm-kona-tmon",
> +		.owner = THIS_MODULE,
> +		.of_match_table = bcm_kona_tmon_match_table,
> +	},
> +	.probe = bcm_kona_tmon_probe,
> +	.remove = bcm_kona_tmon_remove,
> +};
> +
> +module_platform_driver(bcm_kona_tmon_driver);
> +
> +MODULE_DESCRIPTION("Broadcom Kona Temperature Monitor Driver");
> +MODULE_AUTHOR("Broadcom Corporation");
> +MODULE_LICENSE("GPL v2");
> +MODULE_ALIAS("platform:bcm-kona-tmon");
> -- 
> 1.7.9.5
> 
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at  http://www.tux.org/lkml/

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH 2/3] ARM: configs:enable thermal framework for bcm281xx

[Wendy Ng]

This enables the thermal framework and hwmon interface for Broadcom
bcm281xx SoCs.

Signed-off-by: Wendy Ng <wendy.ng@broadcom.com>
Reviewed-by: Markus Mayer <mmayer@broadcom.com>
Reviewed-by: Christian Daudt <csd@broadcom.com>
Reviewed-by: Matt Porter <matt.porter@linaro.org>
Reviewed-by: Tim Kryger <tim.kryger@linaro.org>
---
 arch/arm/configs/bcm_defconfig |    4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/arch/arm/configs/bcm_defconfig b/arch/arm/configs/bcm_defconfig
index efb0132..a600b61 100644
--- a/arch/arm/configs/bcm_defconfig
+++ b/arch/arm/configs/bcm_defconfig
@@ -84,7 +84,9 @@ CONFIG_SERIAL_8250_DW=y
 CONFIG_HW_RANDOM=y
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=y
-# CONFIG_HWMON is not set
+CONFIG_THERMAL=y
+CONFIG_THERMAL_OF=y
+CONFIG_HWMON=y
 CONFIG_VIDEO_OUTPUT_CONTROL=y
 CONFIG_FB=y
 CONFIG_BACKLIGHT_LCD_SUPPORT=y
-- 
1.7.9.5

[PATCH 3/3] ARM: dts: Add TMON driver support to bcm281xx

[Wendy Ng]

This adds the support of Temperature Monitor (TMON) driver for
Broadcom bcm281xx SoCs to the DT node. This also adds the
thermal framework device-tree binding such that TMON driver
can be used within the thermal framework.

Signed-off-by: Wendy Ng <wendy.ng-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Markus Mayer <mmayer-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Christian Daudt <csd-dY08KVG/lbpWk0Htik3J/w@public.gmane.org>
Reviewed-by: Matt Porter <matt.porter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Reviewed-by: Tim Kryger <tim.kryger-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 arch/arm/boot/dts/bcm11351-brt.dts |    4 ++++
 arch/arm/boot/dts/bcm11351.dtsi    |   29 +++++++++++++++++++++++++++++
 arch/arm/boot/dts/bcm28155-ap.dts  |    4 ++++
 3 files changed, 37 insertions(+)

diff --git a/arch/arm/boot/dts/bcm11351-brt.dts b/arch/arm/boot/dts/bcm11351-brt.dts
index 5a269c7..c24fd12 100644
--- a/arch/arm/boot/dts/bcm11351-brt.dts
+++ b/arch/arm/boot/dts/bcm11351-brt.dts
@@ -43,6 +43,10 @@
 		status = "okay";
 	};
 
+	tmon: tmon@34008000 {
+		status = "okay";
+	};
+
 	usbotg@3f120000 {
 		status = "okay";
 	};
diff --git a/arch/arm/boot/dts/bcm11351.dtsi b/arch/arm/boot/dts/bcm11351.dtsi
index 29987e2..0f17beb 100644
--- a/arch/arm/boot/dts/bcm11351.dtsi
+++ b/arch/arm/boot/dts/bcm11351.dtsi
@@ -13,6 +13,7 @@
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "skeleton.dtsi"
 
@@ -25,6 +26,24 @@
 		bootargs = "console=ttyS0,115200n8";
 	};
 
+	thermal-zones {
+		cpu_thermal: cpu_thermal {
+			polling-delay-passive = <250>; /* msec */
+			polling-delay = <1000>; /* msec */
+
+					   /* sensor */
+			thermal-sensors = <&tmon>;
+
+			trips {
+				cpu_crit: cpu_crit {
+				        temperature = <105000>; /* mCelsius */
+				        hysteresis = <2000>; /* mCelsius */
+				        type = THERMAL_TRIP_CRITICAL;
+				};
+			};
+		};
+	};
+
 	gic: interrupt-controller@3ff00100 {
 		compatible = "arm,cortex-a9-gic";
 		#interrupt-cells = <3>;
@@ -285,6 +304,15 @@
 		};
 	};
 
+	tmon: tmon@34008000 {
+		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
+		reg = <0x34008000 0x0024>;
+		clocks = <&tmon_1m_clk>;
+		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+		#thermal-sensor-cells = <0>;
+		status = "disabled";
+	};
+
 	usbotg: usbotg@3f120000 {
 		compatible = "snps,dwc2";
 		reg = <0x3f120000 0x10000>;
@@ -305,4 +333,5 @@
 		compatible = "brcm,kona-usb2";
 		status = "disabled";
 	};
+
 };
diff --git a/arch/arm/boot/dts/bcm28155-ap.dts b/arch/arm/boot/dts/bcm28155-ap.dts
index 02ebaaf..7151c25 100644
--- a/arch/arm/boot/dts/bcm28155-ap.dts
+++ b/arch/arm/boot/dts/bcm28155-ap.dts
@@ -63,6 +63,10 @@
 		status = "okay";
 	};
 
+	tmon: tmon@34008000 {
+		status = "okay";
+	};
+
 	usbotg@3f120000 {
 		status = "okay";
 	};
-- 
1.7.9.5


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH 3/3] ARM: dts: Add TMON driver support to bcm281xx

[Kumar Gala]

On Oct 25, 2013, at 7:00 PM, Wendy Ng wrote:

> 
> +	tmon: tmon@34008000 {
> +		compatible = "brcm,bcm11351-tmon", "brcm,kona-tmon";
> +		reg = <0x34008000 0x0024>;
> +		clocks = <&tmon_1m_clk>;
> +		interrupts = <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
> +		#thermal-sensor-cells = <0>;

Where is #thermal-sensor-cells documented?

> +		status = "disabled";
> +	};
> +

-- 
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation