From: NeilBrown <neilb@suse.de>
To: Anton Vorontsov <anton@enomsg.org>,
David Woodhouse <dwmw2@infradead.org>,
Grant Likely <grant.likely@linaro.org>
Cc: devicetree@vger.kernel.org, linux-omap@vger.kernel.org,
Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Belisko Marek <marek.belisko@gmail.com>,
"Dr. H. Nikolaus Schaller" <hns@goldelico.com>
Subject: [PATCH] twl4030_charger: add devicetree support.
Date: Thu, 31 Oct 2013 17:05:50 +1100 [thread overview]
Message-ID: <20131031170550.686cdf1e@notabene.brown> (raw)
[-- Attachment #1: Type: text/plain, Size: 4048 bytes --]
This allows the charger to be enabled with devicetree, and
allows the parameters for charging the backup battery to be set.
Signed-off-by: NeilBrown <neilb@suse.de>
Acked-by: Kumar Gala <galak@codeaurora.org>
Acked-by: Grant Likely <grant.likely@linaro.org>
--
This version with correct property names and some Acked-by's.
- NB
diff --git a/Documentation/devicetree/bindings/power/twl-charger.txt b/Documentation/devicetree/bindings/power/twl-charger.txt
new file mode 100644
index 000000000000..d5c706216df5
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/twl-charger.txt
@@ -0,0 +1,20 @@
+TWL BCI (Battery Charger Interface)
+
+Required properties:
+- compatible:
+ - "ti,twl4030-bci"
+- interrupts: two interrupt lines from the TWL SIH (secondary
+ interrupt handler) - interrupts 9 and 2.
+
+Optional properties:
+- ti,bb-uvolt: microvolts for charging the backup battery.
+- ti,bb-uamp: microamps for charging the backup battery.
+
+Examples:
+
+bci {
+ compatible = "ti,twl4030-bci";
+ interrupts = <9>, <2>;
+ ti,bb-uvolt = <3200000>;
+ ti,bb-uamp = <150>;
+};
diff --git a/arch/arm/boot/dts/twl4030.dtsi b/arch/arm/boot/dts/twl4030.dtsi
index ae6a17aed9ee..5a12540b1d0f 100644
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -19,6 +19,12 @@
interrupts = <11>;
};
+ charger: bci {
+ compatible = "ti,twl4030-bci";
+ interrupts = <9>, <2>;
+ bci3v1-supply = <&vusb3v1>;
+ };
+
watchdog {
compatible = "ti,twl4030-wdt";
};
diff --git a/drivers/power/twl4030_charger.c b/drivers/power/twl4030_charger.c
index d98abe911e37..f14108844e1a 100644
--- a/drivers/power/twl4030_charger.c
+++ b/drivers/power/twl4030_charger.c
@@ -495,10 +495,38 @@ static enum power_supply_property twl4030_charger_props[] = {
POWER_SUPPLY_PROP_CURRENT_NOW,
};
+#ifdef CONFIG_OF
+static const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+ struct device_node *np = dev->of_node;
+ struct twl4030_bci_platform_data *pdata;
+ u32 num;
+
+ if (!np)
+ return NULL;
+ pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return pdata;
+
+ if (of_property_read_u32(np, "ti,bb-uvolt", &num) == 0)
+ pdata->bb_uvolt = num;
+ if (of_property_read_u32(np, "ti,bb-uamp", &num) == 0)
+ pdata->bb_uamp = num;
+ return pdata;
+}
+#else
+static inline const struct twl4030_bci_platform_data *
+twl4030_bci_parse_dt(struct device *dev)
+{
+ return NULL;
+}
+#endif
+
static int __init twl4030_bci_probe(struct platform_device *pdev)
{
struct twl4030_bci *bci;
- struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
+ const struct twl4030_bci_platform_data *pdata = pdev->dev.platform_data;
int ret;
u32 reg;
@@ -506,6 +534,9 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
if (bci == NULL)
return -ENOMEM;
+ if (!pdata)
+ pdata = twl4030_bci_parse_dt(&pdev->dev);
+
bci->dev = &pdev->dev;
bci->irq_chg = platform_get_irq(pdev, 0);
bci->irq_bci = platform_get_irq(pdev, 1);
@@ -581,8 +612,11 @@ static int __init twl4030_bci_probe(struct platform_device *pdev)
twl4030_charger_enable_ac(true);
twl4030_charger_enable_usb(bci, true);
- twl4030_charger_enable_backup(pdata->bb_uvolt,
- pdata->bb_uamp);
+ if (pdata)
+ twl4030_charger_enable_backup(pdata->bb_uvolt,
+ pdata->bb_uamp);
+ else
+ twl4030_charger_enable_backup(0, 0);
return 0;
@@ -631,10 +665,17 @@ static int __exit twl4030_bci_remove(struct platform_device *pdev)
return 0;
}
+static const struct of_device_id twl_bci_of_match[] = {
+ {.compatible = "ti,twl4030-bci", },
+ { }
+};
+MODULE_DEVICE_TABLE(of, twl_bci_of_match);
+
static struct platform_driver twl4030_bci_driver = {
.driver = {
.name = "twl4030_bci",
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(twl_bci_of_match),
},
.remove = __exit_p(twl4030_bci_remove),
};
[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
next reply other threads:[~2013-10-31 6:05 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-31 6:05 NeilBrown [this message]
2013-11-13 6:40 ` [PATCH] twl4030_charger: add devicetree support Anton Vorontsov
-- strict thread matches above, loose matches on Subject: below --
2013-10-24 5:50 NeilBrown
2013-10-24 9:44 ` Kumar Gala
2013-10-24 10:06 ` Grant Likely
2013-10-24 10:41 ` NeilBrown
2013-10-25 3:56 ` Kumar Gala
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131031170550.686cdf1e@notabene.brown \
--to=neilb@suse.de \
--cc=anton@enomsg.org \
--cc=devicetree@vger.kernel.org \
--cc=dwmw2@infradead.org \
--cc=grant.likely@linaro.org \
--cc=hns@goldelico.com \
--cc=ijc+devicetree@hellion.org.uk \
--cc=linux-omap@vger.kernel.org \
--cc=marek.belisko@gmail.com \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).