From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lee Jones Subject: Re: [PATCH 1/1] Documentation/mfd: Fix typos in s2mps11.txt Date: Fri, 8 Nov 2013 10:28:53 +0000 Message-ID: <20131108102853.GV30901@lee--X1> References: <1383634640-26869-1-git-send-email-sachin.kamat@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <1383634640-26869-1-git-send-email-sachin.kamat@linaro.org> Sender: linux-doc-owner@vger.kernel.org To: Sachin Kamat Cc: linux-kernel@vger.kernel.org, linux-doc@vger.kernel.org, devicetree@vger.kernel.org, rob@landley.net List-Id: devicetree@vger.kernel.org As this is only a trivial patch, I'll take it out the hands of the already overloaded DT maintainers. > Fixed trivial typos to improve readability. >=20 > Signed-off-by: Sachin Kamat > --- > Documentation/devicetree/bindings/mfd/s2mps11.txt | 9 +++++---- > 1 file changed, 5 insertions(+), 4 deletions(-) >=20 > diff --git a/Documentation/devicetree/bindings/mfd/s2mps11.txt b/Docu= mentation/devicetree/bindings/mfd/s2mps11.txt > index c9332c6..0ff4e65 100644 > --- a/Documentation/devicetree/bindings/mfd/s2mps11.txt > +++ b/Documentation/devicetree/bindings/mfd/s2mps11.txt > @@ -1,10 +1,10 @@ > =20 > * Samsung S2MPS11 Voltage and Current Regulator > =20 > -The Samsung S2MP211 is a multi-function device which includes voltag= e and > +The Samsung S2MPS11 is a multi-function device which includes voltag= e and Nice catch eagle-eye! > current regulators, RTC, charger controller and other sub-blocks. It= is > -interfaced to the host controller using a I2C interface. Each sub-bl= ock is > -addressed by the host system using different I2C slave address. > +interfaced to the host controller using an I2C interface. Each sub-b= lock is > +addressed by the host system using different I2C slave addresses. > =20 > Required properties: > - compatible: Should be "samsung,s2mps11-pmic". > @@ -43,7 +43,8 @@ sub-node should be of the format as listed below. > =20 > BUCK[2/3/4/6] supports disabling ramp delay on hardware, so explict= ly > regulator-ramp-delay =3D <0> can be used for them to disable ramp d= elay. > - In absence of regulator-ramp-delay property, default ramp delay wil= l be used. > + In the absence of regulator-ramp-delay property, default ramp delay= will > + be used. So if we're being pertinacity here, your correction isn't much better. s/of regulator-ramp-delay property,/of {the,an} regulator-ramp-delay pr= operty, the or=20 s/of regulator-ramp-delay property,/of regulator-ramp-delay, the > NOTE: Some BUCKs share the ramp rate setting i.e. same ramp value wi= ll be set > for a particular group of BUCKs. So provide same regulator-ramp-dela= y. --=20 Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org =E2=94=82 Open source software for ARM SoCs =46ollow Linaro: Facebook | Twitter | Blog