From: Guenter Roeck <linux@roeck-us.net>
To: Arnaud Ebalard <arno@natisbad.org>
Cc: Jean Delvare <khali@linux-fr.org>,
Rob Herring <rob.herring@calxeda.com>,
Pawel Moll <pawel.moll@arm.com>,
Mark Rutland <mark.rutland@arm.com>,
Stephen Warren <swarren@wwwdotorg.org>,
Ian Campbell <ijc+devicetree@hellion.org.uk>,
Rob Landley <rob@landley.net>,
Grant Likely <grant.likely@linaro.org>,
Linus Walleij <linus.walleij@linaro.org>,
Arnd Bergmann <arnd@arndb.de>,
devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
linux-kernel@vger.kernel.org, lm-sensors@lm-sensors.org
Subject: Re: [PATCH] hwmon: add support for GMT G751 chip in lm75 driver
Date: Sat, 9 Nov 2013 10:27:07 -0800 [thread overview]
Message-ID: <20131109182707.GA19407@roeck-us.net> (raw)
In-Reply-To: <87bo1th3ul.fsf@natisbad.org>
On Sat, Nov 09, 2013 at 06:39:14PM +0100, Arnaud Ebalard wrote:
>
> This was tested on a NETGEAR ReadyNAS 2120 device (Marvell Armada XP
> based board, via DT).
>
> Signed-off-by: Arnaud Ebalard <arno@natisbad.org>
Looks good. I'll apply it to my -next branch. Since I already sent my
pull request to Linus, this will only go in after -rc1, which I hope
should be ok (unless Jean wants to pick it up for his pull request).
> ---
> Hi Guenter,
>
> As a side note, I removed the hunk that was present in previous patch to
> add gmt to the list of DT vendor prefixes because I noticed someone had
> taken care: https://lkml.org/lkml/2013/9/12/365
>
> For the records, here is what I get on my NAS with the attached patch:
>
> root@thin:/sys# sensors
> g762-i2c-0-3e
> Adapter: mv64xxx_i2c adapter
> fan1: 5461 RPM (div = 1)
>
> g762-i2c-0-48
> Adapter: mv64xxx_i2c adapter
> fan1: 5461 RPM (div = 1)
>
> g762-i2c-0-49
> Adapter: mv64xxx_i2c adapter
> fan1: 5461 RPM (div = 1)
>
Those rpms are pretty high. Are the fans all really running that fast ?
Thanks,
Guenter
next prev parent reply other threads:[~2013-11-09 18:27 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-09 17:39 [PATCH] hwmon: add support for GMT G751 chip in lm75 driver Arnaud Ebalard
2013-11-09 18:27 ` Guenter Roeck [this message]
2013-11-09 19:42 ` Arnaud Ebalard
2013-11-09 21:17 ` Jean Delvare
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131109182707.GA19407@roeck-us.net \
--to=linux@roeck-us.net \
--cc=arnd@arndb.de \
--cc=arno@natisbad.org \
--cc=devicetree@vger.kernel.org \
--cc=grant.likely@linaro.org \
--cc=ijc+devicetree@hellion.org.uk \
--cc=khali@linux-fr.org \
--cc=linus.walleij@linaro.org \
--cc=linux-doc@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=lm-sensors@lm-sensors.org \
--cc=mark.rutland@arm.com \
--cc=pawel.moll@arm.com \
--cc=rob.herring@calxeda.com \
--cc=rob@landley.net \
--cc=swarren@wwwdotorg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).