From mboxrd@z Thu Jan 1 00:00:00 1970 From: =?iso-8859-15?q?J=FCrgen_Beisert?= Subject: Re: [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode Date: Tue, 12 Nov 2013 15:51:15 +0100 Message-ID: <201311121551.15343.jbe@pengutronix.de> References: <1384266701-12608-1-git-send-email-s.hauer@pengutronix.de> <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> Mime-Version: 1.0 Content-Type: Text/Plain; charset=iso-8859-15 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1384266701-12608-4-git-send-email-s.hauer-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Content-Disposition: inline Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sascha Hauer Cc: barebox-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Tuesday 12 November 2013 15:31:40 Sascha Hauer wrote: > [...] > +Required properties: > +- compatible: shall be "altr,passive-serial" > +- reg: SPI chip select > +- nstat-gpio: Specify GPIO for controlling the nstat pin > +- confd-gpio: Specify GPIO for controlling the confd pin > +- nconfig-gpio: Specify GPIO for controlling the nconfig pin A suggestion was to use the genuine signal names at the FPGA side: "nstatus", "config-done" and "nconfig" (all with the trailing "-gpio") jbe --=20 Pengutronix e.K. =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0= =A0| Juergen Beisert =A0 =A0 =A0 =A0 =A0 =A0 | Linux Solutions for Science and Industry =A0 =A0 =A0| http://www.pengut= ronix.de/ | -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html