From mboxrd@z Thu Jan 1 00:00:00 1970 From: Sascha Hauer Subject: Re: [PATCH 3/4] DT: Add binding for Altera FPGAs in passive-serial mode Date: Tue, 12 Nov 2013 23:02:27 +0100 Message-ID: <20131112220227.GO24559@pengutronix.de> References: <1384266701-12608-1-git-send-email-s.hauer@pengutronix.de> <1384266701-12608-4-git-send-email-s.hauer@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Kumar Gala Cc: barebox-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, jbe-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org On Tue, Nov 12, 2013 at 10:21:02AM -0600, Kumar Gala wrote: >=20 > On Nov 12, 2013, at 8:31 AM, Sascha Hauer wr= ote: >=20 > > Signed-off-by: Sascha Hauer > > Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org > > --- > > .../devicetree/bindings/firmware/altr,passive-serial.txt | 13 ++= +++++++++++ > > 1 file changed, 13 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/firmware/altr,= passive-serial.txt > >=20 > > diff --git a/Documentation/devicetree/bindings/firmware/altr,passiv= e-serial.txt b/Documentation/devicetree/bindings/firmware/altr,passive-= serial.txt > > new file mode 100644 > > index 0000000..6d40c91 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/firmware/altr,passive-seria= l.txt > > @@ -0,0 +1,13 @@ > > +Altera FPGAs in passive serial mode > > +----------------------------------- > > + > > +This binding defines the control interface to Altera FPGAs in > > +passive serial mode. This is used to upload the firmware and > > +to start the FPGA. > > + > > +Required properties: > > +- compatible: shall be "altr,passive-serial=E2=80=9D >=20 > This doesn=E2=80=99t seem quite descriptive enough, easy to confuse w= ith a serial port. How about altr,fpga-passive-serial? Other suggestions? >=20 > > +- reg: SPI chip select >=20 > Is this a SPI device than? Yes, it is. Sascha --=20 Pengutronix e.K. | = | Industrial Linux Solutions | http://www.pengutronix.de/= | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 = | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-555= 5 | -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html