From: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
srinivas.kandagatla-qxv4g6HH51o@public.gmane.org
Subject: Re: [PATCH RFC] net: of_mdio: Scan PHYs which have device_type set to ethernet-phy
Date: Fri, 15 Nov 2013 10:35:28 +0900 [thread overview]
Message-ID: <20131115013528.339CEC40618@trevor.secretlab.ca> (raw)
In-Reply-To: <1384441556-20674-1-git-send-email-srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>
On Thu, 14 Nov 2013 15:05:56 +0000, Srinivas Kandagatla <srinivas.kandagatla-qxv4g6HH51o@public.gmane.org> wrote:
> According to Documentation/devicetree/bindings/net/phy.txt device_type
> property of PHY nodes is mandatory, which should be set to
> "ethernet-phy". This patch adds check in scanning phys and only scans
> node which have device-type set to "ethernet-phy".
>
> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>
Hi Srinivas,
Thanks for looking at this. However, there is a high likelyhood that
this patch will break existing platforms since we haven't enforced this
requirement before. Besides, I don't think the ethernet-phy binding is
necessary. The mere fact that it is a child of the MDIO bus node means
that the device is a PHY device for the purposes of the subsystem.
Nacked-by: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
g.
> ---
> drivers/of/of_mdio.c | 7 +++++++
> 1 files changed, 7 insertions(+), 0 deletions(-)
>
> diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
> index d5a57a9..78c53c7 100644
> --- a/drivers/of/of_mdio.c
> +++ b/drivers/of/of_mdio.c
> @@ -57,6 +57,9 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
>
> /* Loop over the child nodes and register a phy_device for each one */
> for_each_available_child_of_node(np, child) {
> + /* A PHY must have device_type set to "ethernet-phy" */
> + if (of_node_cmp(child->type, "ethernet-phy"))
> + continue;
> /* A PHY must have a reg property in the range [0-31] */
> paddr = of_get_property(child, "reg", &len);
> if (!paddr || len < sizeof(*paddr)) {
> @@ -112,6 +115,10 @@ int of_mdiobus_register(struct mii_bus *mdio, struct device_node *np)
>
> /* auto scan for PHYs with empty reg property */
> for_each_available_child_of_node(np, child) {
> + /* A PHY must have device_type set to "ethernet-phy" */
> + if (of_node_cmp(child->type, "ethernet-phy"))
> + continue;
> +
> /* Skip PHYs with reg property set */
> paddr = of_get_property(child, "reg", &len);
> if (paddr)
> --
> 1.7.6.5
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2013-11-15 1:35 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-14 15:05 [PATCH RFC] net: of_mdio: Scan PHYs which have device_type set to ethernet-phy Srinivas Kandagatla
[not found] ` <1384441556-20674-1-git-send-email-srinivas.kandagatla-qxv4g6HH51o@public.gmane.org>
2013-11-15 1:35 ` Grant Likely [this message]
2013-12-11 7:15 ` Florian Fainelli
2013-12-11 9:15 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131115013528.339CEC40618@trevor.secretlab.ca \
--to=grant.likely-qsej5fyqhm4dnm+yrofe0a@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org \
--cc=srinivas.kandagatla-qxv4g6HH51o@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).