From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: [PATCH v2] net: smc91x: Fix device tree based configuration so it's usable Date: Wed, 27 Nov 2013 10:56:57 -0800 Message-ID: <20131127185657.GA26766@atomide.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline Sender: netdev-owner@vger.kernel.org To: "David S. Miller" Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, Nicolas Pitre , Mark Rutland List-Id: devicetree@vger.kernel.org Commit 89ce376c6bdc (drivers/net: Use of_match_ptr() macro in smc91x.c) added minimal device tree support to smc91x, but it's not working on many platforms because of the lack of some key configuration bits. Fix the issue by parsing the necessary configuration like the smc911x driver is doing. As most smc91x users seem to use 16-bit access, let's default to that if no reg-io-width is specified. Cc: Nicolas Pitre Cc: Mark Rutland Cc: netdev@vger.kernel.org Cc: devicetree@vger.kernel.org Signed-off-by: Tony Lindgren --- Device tree folks, any objection to using the reg-io-width property as a mask here? Looks like we can use reg-io-width as a mask too if needed, it seems to play fine with combinations of 1 = 8-bit, 2 = 16-bit, 4 = 32-bit and so on. I would like to see this merged during the -rc cycle as this makes my test devices behave the same way when booted in legacy platform data mode compared to when booted with device tree. --- a/Documentation/devicetree/bindings/net/smsc-lan91c111.txt +++ b/Documentation/devicetree/bindings/net/smsc-lan91c111.txt @@ -8,3 +8,7 @@ Required properties: Optional properties: - phy-device : phandle to Ethernet phy - local-mac-address : Ethernet mac address to use +- reg-io-width : Mask of sizes (in bytes) of the IO accesses that + are supported on the device. Valid value for SMSC LAN91c111 are + 1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning + 16-bit access only. --- a/drivers/net/ethernet/smsc/smc91x.c +++ b/drivers/net/ethernet/smsc/smc91x.c @@ -82,6 +82,7 @@ static const char version[] = #include #include #include +#include #include #include @@ -2184,6 +2185,15 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * } } +#if IS_BUILTIN(CONFIG_OF) +static const struct of_device_id smc91x_match[] = { + { .compatible = "smsc,lan91c94", }, + { .compatible = "smsc,lan91c111", }, + {}, +}; +MODULE_DEVICE_TABLE(of, smc91x_match); +#endif + /* * smc_init(void) * Input parameters: @@ -2198,6 +2208,8 @@ static void smc_release_datacs(struct platform_device *pdev, struct net_device * static int smc_drv_probe(struct platform_device *pdev) { struct smc91x_platdata *pd = dev_get_platdata(&pdev->dev); + struct device_node *np = pdev->dev.of_node; + const struct of_device_id *match = NULL; struct smc_local *lp; struct net_device *ndev; struct resource *res, *ires; @@ -2217,11 +2229,33 @@ static int smc_drv_probe(struct platform_device *pdev) */ lp = netdev_priv(ndev); + lp->cfg.flags = 0; if (pd) { memcpy(&lp->cfg, pd, sizeof(lp->cfg)); lp->io_shift = SMC91X_IO_SHIFT(lp->cfg.flags); - } else { + } + +#if IS_BUILTIN(CONFIG_OF) + match = of_match_device(of_match_ptr(smc91x_match), &pdev->dev); + if (match) { + u32 val; + + /* Combination of IO widths supported, default to 16-bit */ + if (!of_property_read_u32(np, "reg-io-width", &val)) { + if (val & 1) + lp->cfg.flags |= SMC91X_USE_8BIT; + if ((val == 0) || (val & 2)) + lp->cfg.flags |= SMC91X_USE_16BIT; + if (val & 4) + lp->cfg.flags |= SMC91X_USE_32BIT; + } else { + lp->cfg.flags |= SMC91X_USE_16BIT; + } + } +#endif + + if (!pd && !match) { lp->cfg.flags |= (SMC_CAN_USE_8BIT) ? SMC91X_USE_8BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_16BIT) ? SMC91X_USE_16BIT : 0; lp->cfg.flags |= (SMC_CAN_USE_32BIT) ? SMC91X_USE_32BIT : 0; @@ -2370,15 +2404,6 @@ static int smc_drv_resume(struct device *dev) return 0; } -#ifdef CONFIG_OF -static const struct of_device_id smc91x_match[] = { - { .compatible = "smsc,lan91c94", }, - { .compatible = "smsc,lan91c111", }, - {}, -}; -MODULE_DEVICE_TABLE(of, smc91x_match); -#endif - static struct dev_pm_ops smc_drv_pm_ops = { .suspend = smc_drv_suspend, .resume = smc_drv_resume,