[PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Denis Carikli]

pwmr has to be set to get the imxfb backlight work,
though pwmr was only configurable trough the platform data.

Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Cc: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Acked-by: Grant Likely <grant.likely-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
---
 .../devicetree/bindings/video/fsl,imx-fb.txt       |    3 +++
 drivers/video/imxfb.c                              |    2 ++
 2 files changed, 5 insertions(+)

diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
index 46da08d..ac457ae 100644
--- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
+++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
@@ -17,6 +17,9 @@ Required nodes:
 Optional properties:
 - fsl,dmacr: DMA Control Register value. This is optional. By default, the
 	register is not modified as recommended by the datasheet.
+- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
+	optional, but defining it is necessary to get the backlight working. If that
+	property is ommited, the register is zeroed.
 - fsl,lscr1: LCDC Sharp Configuration Register value.
 
 Example:
diff --git a/drivers/video/imxfb.c b/drivers/video/imxfb.c
index 57d3b81..17a46a7 100644
--- a/drivers/video/imxfb.c
+++ b/drivers/video/imxfb.c
@@ -835,6 +835,8 @@ static int imxfb_init_fbinfo(struct platform_device *pdev)
 
 		of_property_read_u32(np, "fsl,dmacr", &fbi->dmacr);
 
+		of_property_read_u32(np, "fsl,pwmr", &fbi->pwmr);
+
 		/* These two function pointers could be used by some specific
 		 * platforms. */
 		fbi->lcd_power = NULL;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Sascha Hauer]

On Thu, Dec 05, 2013 at 04:43:37PM +0100, Denis Carikli wrote:
> pwmr has to be set to get the imxfb backlight work,
> though pwmr was only configurable trough the platform data.
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> Acked-by: Grant Likely <grant.likely@linaro.org>
> ---
>  .../devicetree/bindings/video/fsl,imx-fb.txt       |    3 +++
>  drivers/video/imxfb.c                              |    2 ++
>  2 files changed, 5 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> index 46da08d..ac457ae 100644
> --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> @@ -17,6 +17,9 @@ Required nodes:
>  Optional properties:
>  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
>  	register is not modified as recommended by the datasheet.
> +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> +	optional, but defining it is necessary to get the backlight working. If that
> +	property is ommited, the register is zeroed.

Why isn't this implemented as a backlight driver? Static devicetree
provided values is very limiting.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Alexander Shiyan]

> On Thu, Dec 05, 2013 at 04:43:37PM +0100, Denis Carikli wrote:
> > pwmr has to be set to get the imxfb backlight work,
> > though pwmr was only configurable trough the platform data.
> > 
> > Cc: Rob Herring <rob.herring@calxeda.com>
> > Cc: Pawel Moll <pawel.moll@arm.com>
> > Cc: Mark Rutland <mark.rutland@arm.com>
> > Cc: Stephen Warren <swarren@wwwdotorg.org>
> > Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> > Cc: devicetree@vger.kernel.org
> > Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> > Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> > Cc: linux-fbdev@vger.kernel.org
> > Cc: Sascha Hauer <kernel@pengutronix.de>
> > Cc: linux-arm-kernel@lists.infradead.org
> > Cc: Eric Bénard <eric@eukrea.com>
> > Signed-off-by: Denis Carikli <denis@eukrea.com>
> > Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
> > Acked-by: Grant Likely <grant.likely@linaro.org>
> > ---
> >  .../devicetree/bindings/video/fsl,imx-fb.txt       |    3 +++
> >  drivers/video/imxfb.c                              |    2 ++
> >  2 files changed, 5 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > index 46da08d..ac457ae 100644
> > --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > @@ -17,6 +17,9 @@ Required nodes:
> >  Optional properties:
> >  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
> >  	register is not modified as recommended by the datasheet.
> > +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> > +	optional, but defining it is necessary to get the backlight working. If that
> > +	property is ommited, the register is zeroed.
> 
> Why isn't this implemented as a backlight driver? Static devicetree
> provided values is very limiting.

Let's understand the terminology.
This register should be renamed according to the datasheet, i.e. LPCCR.
As I pointed out earlier, it is NOT control the backlight, this is a contrast control.
Yes, it works as PWM, but nothing do with the backlight subsystem.
Yes, we can make a driver for this PWM, but how are we going to control it?
I misunderstood something?

---
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Sascha Hauer]

On Fri, Dec 06, 2013 at 12:03:54PM +0400, Alexander Shiyan wrote:
> > >  .../devicetree/bindings/video/fsl,imx-fb.txt       |    3 +++
> > >  drivers/video/imxfb.c                              |    2 ++
> > >  2 files changed, 5 insertions(+)
> > > 
> > > diff --git a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > index 46da08d..ac457ae 100644
> > > --- a/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > +++ b/Documentation/devicetree/bindings/video/fsl,imx-fb.txt
> > > @@ -17,6 +17,9 @@ Required nodes:
> > >  Optional properties:
> > >  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
> > >  	register is not modified as recommended by the datasheet.
> > > +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> > > +	optional, but defining it is necessary to get the backlight working. If that
> > > +	property is ommited, the register is zeroed.
> > 
> > Why isn't this implemented as a backlight driver? Static devicetree
> > provided values is very limiting.
> 
> Let's understand the terminology.
> This register should be renamed according to the datasheet, i.e. LPCCR.
> As I pointed out earlier, it is NOT control the backlight, this is a contrast control.
> Yes, it works as PWM, but nothing do with the backlight subsystem.
> Yes, we can make a driver for this PWM, but how are we going to control it?
> I misunderstood something?

I stumbled upon 'get the backlight working' which implied for me that it
should be a backlight driver. But you're right and now I remember we
talked about this already.

I still think this should be something adjustable, not static data.
Maybe we could change the wording to something like "This property
provides the default value for the contrast control register" since even
if we add driver support for controlling the contrast we still want
to have a sane default.

BTW the contrast could be controlled with a lcd_device (see
lcd_device_register) which seems to be very easy to implement.

SaschaMaybe we could change the wording to something like "This property
provides the default value for the contrast control register" since even
if we add driver support for controlling the contrast we still want
to have a sane default.

BTW the contrast could be controlled with a lcd_device (see
lcd_device_register) which seems to be very easy to implement.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Alexander Shiyan]

> On Fri, Dec 06, 2013 at 12:03:54PM +0400, Alexander Shiyan wrote:
...
> > > >  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
> > > >  	register is not modified as recommended by the datasheet.
> > > > +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> > > > +	optional, but defining it is necessary to get the backlight working. If that
> > > > +	property is ommited, the register is zeroed.
> > > 
> > > Why isn't this implemented as a backlight driver? Static devicetree
> > > provided values is very limiting.
> > 
> > Let's understand the terminology.
> > This register should be renamed according to the datasheet, i.e. LPCCR.
> > As I pointed out earlier, it is NOT control the backlight, this is a contrast control.
> > Yes, it works as PWM, but nothing do with the backlight subsystem.
> > Yes, we can make a driver for this PWM, but how are we going to control it?
> > I misunderstood something?
> 
> I stumbled upon 'get the backlight working' which implied for me that it
> should be a backlight driver. But you're right and now I remember we
> talked about this already.

Hallelujah.

> I still think this should be something adjustable, not static data.
> Maybe we could change the wording to something like "This property
> provides the default value for the contrast control register" since even
> if we add driver support for controlling the contrast we still want
> to have a sane default.

Sounds good.

> BTW the contrast could be controlled with a lcd_device (see
> lcd_device_register) which seems to be very easy to implement.

Address of register is placed within LCD area, so we cannot use this
memory region, I think is no so easy as you say....

---

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Sascha Hauer]

On Fri, Dec 06, 2013 at 12:35:10PM +0400, Alexander Shiyan wrote:
> > On Fri, Dec 06, 2013 at 12:03:54PM +0400, Alexander Shiyan wrote:
> ...
> > > > >  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
> > > > >  	register is not modified as recommended by the datasheet.
> > > > > +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> > > > > +	optional, but defining it is necessary to get the backlight working. If that
> > > > > +	property is ommited, the register is zeroed.
> > > > 
> > > > Why isn't this implemented as a backlight driver? Static devicetree
> > > > provided values is very limiting.
> > > 
> > > Let's understand the terminology.
> > > This register should be renamed according to the datasheet, i.e. LPCCR.
> > > As I pointed out earlier, it is NOT control the backlight, this is a contrast control.
> > > Yes, it works as PWM, but nothing do with the backlight subsystem.
> > > Yes, we can make a driver for this PWM, but how are we going to control it?
> > > I misunderstood something?
> > 
> > I stumbled upon 'get the backlight working' which implied for me that it
> > should be a backlight driver. But you're right and now I remember we
> > talked about this already.
> 
> Hallelujah.
> 
> > I still think this should be something adjustable, not static data.
> > Maybe we could change the wording to something like "This property
> > provides the default value for the contrast control register" since even
> > if we add driver support for controlling the contrast we still want
> > to have a sane default.
> 
> Sounds good.
> 
> > BTW the contrast could be controlled with a lcd_device (see
> > lcd_device_register) which seems to be very easy to implement.
> 
> Address of register is placed within LCD area, so we cannot use this
> memory region, I think is no so easy as you say....

We do not need a separate driver for this. Look for example at
drivers/video/bf537-lq035.c, it just calls lcd_device_register()
in its probe function.

Sascha

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv13][ 2/4] video: imxfb: Also add pwmr for the device tree.

[Alexander Shiyan]

> > > On Fri, Dec 06, 2013 at 12:03:54PM +0400, Alexander Shiyan wrote:
> > ...
> > > > > >  - fsl,dmacr: DMA Control Register value. This is optional. By default, the
> > > > > >  	register is not modified as recommended by the datasheet.
> > > > > > +- fsl,pwmr:  LCDC PWM Contrast Control Register value. That property is
> > > > > > +	optional, but defining it is necessary to get the backlight working. If that
> > > > > > +	property is ommited, the register is zeroed.
> > > > > 
> > > > > Why isn't this implemented as a backlight driver? Static devicetree
> > > > > provided values is very limiting.
> > > > 
> > > > Let's understand the terminology.
> > > > This register should be renamed according to the datasheet, i.e. LPCCR.
> > > > As I pointed out earlier, it is NOT control the backlight, this is a contrast control.
> > > > Yes, it works as PWM, but nothing do with the backlight subsystem.
> > > > Yes, we can make a driver for this PWM, but how are we going to control it?
> > > > I misunderstood something?
> > > 
> > > I stumbled upon 'get the backlight working' which implied for me that it
> > > should be a backlight driver. But you're right and now I remember we
> > > talked about this already.
> > 
> > Hallelujah.
> > 
> > > I still think this should be something adjustable, not static data.
> > > Maybe we could change the wording to something like "This property
> > > provides the default value for the contrast control register" since even
> > > if we add driver support for controlling the contrast we still want
> > > to have a sane default.
> > 
> > Sounds good.
> > 
> > > BTW the contrast could be controlled with a lcd_device (see
> > > lcd_device_register) which seems to be very easy to implement.
> > 
> > Address of register is placed within LCD area, so we cannot use this
> > memory region, I think is no so easy as you say....
> 
> We do not need a separate driver for this. Look for example at
> drivers/video/bf537-lq035.c, it just calls lcd_device_register()
> in its probe function.

Nice. Seems this example even can handle LCD power
regulator from "[1/4] video: imxfb: Introduce regulator support."

---

[PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.

[Denis Carikli]

Without that patch, a user can't select the imxfb driver when the i.MX25 and/or
  the i.MX27 device tree board are selected and that no boards that selects
  IMX_HAVE_PLATFORM_IMX_FB are compiled in.

Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Russell King <linux-lFZ/pmaqli7XmaaqVzeoHQ@public.gmane.org>
Cc: Jean-Christophe Plagniol-Villard <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
Cc: Tomi Valkeinen <tomi.valkeinen-l0cyMroinI0@public.gmane.org>
Cc: linux-fbdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Acked-by: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj-sclMFOaUSTBWk0Htik3J/w@public.gmane.org>
---
ChangeLog v10->v11:
- moved my signed-off-by.

ChangeLog v8->v9:
- Added Jean-Christophe PLAGNIOL-VILLARD's ACK.
---
 drivers/video/Kconfig |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 4f2e1b3..22adaee 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -363,7 +363,7 @@ config FB_SA1100
 
 config FB_IMX
 	tristate "Freescale i.MX1/21/25/27 LCD support"
-	depends on FB && IMX_HAVE_PLATFORM_IMX_FB
+	depends on FB && ARCH_MXC
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv13][ 3/4] video: Kconfig: Allow more broad selection of the imxfb framebuffer driver.

[Sascha Hauer]

On Thu, Dec 05, 2013 at 04:43:38PM +0100, Denis Carikli wrote:
> Without that patch, a user can't select the imxfb driver when the i.MX25 and/or
>   the i.MX27 device tree board are selected and that no boards that selects
>   IMX_HAVE_PLATFORM_IMX_FB are compiled in.
> 
> Cc: Rob Herring <rob.herring@calxeda.com>
> Cc: Pawel Moll <pawel.moll@arm.com>
> Cc: Mark Rutland <mark.rutland@arm.com>
> Cc: Stephen Warren <swarren@wwwdotorg.org>
> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
> Cc: devicetree@vger.kernel.org
> Cc: Sascha Hauer <kernel@pengutronix.de>
> Cc: linux-arm-kernel@lists.infradead.org
> Cc: Russell King <linux@arm.linux.org.uk>
> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
> Cc: linux-fbdev@vger.kernel.org
> Cc: Eric Bénard <eric@eukrea.com>
> Signed-off-by: Denis Carikli <denis@eukrea.com>
> Acked-by: Shawn Guo <shawn.guo@linaro.org>
> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>


Acked-by: Sascha Hauer <s.hauer@pengutronix.de>

Sascha

> ---
> ChangeLog v10->v11:
> - moved my signed-off-by.
> 
> ChangeLog v8->v9:
> - Added Jean-Christophe PLAGNIOL-VILLARD's ACK.
> ---
>  drivers/video/Kconfig |    2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
> index 4f2e1b3..22adaee 100644
> --- a/drivers/video/Kconfig
> +++ b/drivers/video/Kconfig
> @@ -363,7 +363,7 @@ config FB_SA1100
>  
>  config FB_IMX
>  	tristate "Freescale i.MX1/21/25/27 LCD support"
> -	depends on FB && IMX_HAVE_PLATFORM_IMX_FB
> +	depends on FB && ARCH_MXC
>  	select FB_CFB_FILLRECT
>  	select FB_CFB_COPYAREA
>  	select FB_CFB_IMAGEBLIT
> -- 
> 1.7.9.5
> 
> 

-- 
Pengutronix e.K.                           |                             |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |
Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

[PATCHv13][ 4/4] ARM: dts: imx25: mbimxsd25: Add displays support.

[Denis Carikli]

The CMO-QVGA(With backlight), DVI-VGA and DVI-SVGA displays
were added.

Cc: Shawn Guo <shawn.guo-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Cc: Rob Herring <rob.herring-bsGFqQB8/DxBDgjK7y7TUQ@public.gmane.org>
Cc: Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>
Cc: Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>
Cc: Stephen Warren <swarren-3lzwWm7+Weoh9ZMKESR00Q@public.gmane.org>
Cc: Ian Campbell <ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Sascha Hauer <kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org>
Cc: linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Cc: Eric Bénard <eric-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
Signed-off-by: Denis Carikli <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
---
ChangeLog v10->v13:
- This patch is the display part splitted out from the patch adding
  support for the cpuimx25(and its baseboard).
- Shawn Guo was added to the Cc list.
- The regulator part was updated to match the current style.
- The new GPIO defines are now used in the dts(i).
---
 .../imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts  |   72 ++++++++++++++++++++
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts  |   45 ++++++++++++
 .../imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts   |   45 ++++++++++++
 3 files changed, 162 insertions(+)
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
 create mode 100644 arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts

diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
new file mode 100644
index 0000000..0df7e9e
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-cmo-qvga.dts
@@ -0,0 +1,72 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the CMO-QVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-cmo-qvga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	cmo_qvga: display {
+		model = "CMO-QVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xcad08b80>;
+		bus-width = <18>;
+		native-mode = <&qvga_timings>;
+		display-timings {
+			qvga_timings: 320x240 {
+				clock-frequency = <6500000>;
+				hactive = <320>;
+				vactive = <240>;
+				hback-porch = <30>;
+				hfront-porch = <38>;
+				vback-porch = <20>;
+				vfront-porch = <3>;
+				hsync-len = <15>;
+				vsync-len = <4>;
+			};
+		};
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_lcd_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_reg_lcd_3v3>;
+			regulator-name = "lcd-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+			enable-active-high;
+		};
+	};
+};
+
+&iomuxc {
+	imx25-eukrea-mbimxsd25-baseboard-cmo-qvga {
+		pinctrl_reg_lcd_3v3: reg_lcd_3v3 {
+			fsl,pins = <MX25_PAD_PWM__GPIO_1_26 0x80000000>;
+		};
+	};
+};
+
+&lcdc {
+	display = <&cmo_qvga>;
+	fsl,pwmr = <0x00a903ff>;
+	lcd-supply = <&reg_lcd_3v3>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
new file mode 100644
index 0000000..8eee2f6
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-svga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-SVGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-svga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_svga: display {
+		model = "DVI-SVGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_svga_timings>;
+		display-timings {
+			dvi_svga_timings: 800x600 {
+				clock-frequency = <40000000>;
+				hactive = <800>;
+				vactive = <600>;
+				hback-porch = <75>;
+				hfront-porch = <75>;
+				vback-porch = <7>;
+				vfront-porch = <75>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_svga>;
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
new file mode 100644
index 0000000..447da62
--- /dev/null
+++ b/arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard-dvi-vga.dts
@@ -0,0 +1,45 @@
+/*
+ * Copyright 2013 Eukréa Electromatique <denis-fO0SIAKYzcbQT0dZR+AlfA@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include "imx25-eukrea-mbimxsd25-baseboard.dts"
+
+/ {
+	model = "Eukrea MBIMXSD25 with the DVI-VGA Display";
+	compatible = "eukrea,mbimxsd25-baseboard-dvi-vga", "eukrea,mbimxsd25-baseboard", "eukrea,cpuimx25", "fsl,imx25";
+
+	dvi_vga: display {
+		model = "DVI-VGA";
+		bits-per-pixel = <16>;
+		fsl,pcr = <0xfa208b80>;
+		bus-width = <18>;
+		native-mode = <&dvi_vga_timings>;
+		display-timings {
+			dvi_vga_timings: 640x480 {
+				clock-frequency = <31250000>;
+				hactive = <640>;
+				vactive = <480>;
+				hback-porch = <100>;
+				hfront-porch = <100>;
+				vback-porch = <7>;
+				vfront-porch = <100>;
+				hsync-len = <7>;
+				vsync-len = <7>;
+			};
+		};
+	};
+};
+
+&lcdc {
+	display = <&dvi_vga>;
+	status = "okay";
+};
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html