Re: [GIT PULL] clk: initial support for Broadcom Kona clocks

[Mike Turquette <mturquette@linaro.org>]

Quoting Alex Elder (2013-12-16 07:26:29)
> Mike, please pull the following for 3.14.  It adds clock support
> for Broadcom SoCs having "Kona" clock control units.  Thanks.

Pulled into clk-next.

Thanks!
Mike

> 
>                                         -Alex
> 
> The following changes since commit 1459c837036a44e2dcf14a9452ed330201fb23b5:
> 
>   clk: si570: Add a driver for SI570 oscillators (2013-12-14 21:01:35 -0800)
> 
> are available in the git repository at:
> 
>   git://git.linaro.org/landing-teams/working/broadcom/kernel.git
> pull/mturquette-kona-clocks
> 
> for you to fetch changes up to 143522e704d105bd2b3cbbca6e8fb2d217866ec0:
> 
>   clk: bcm281xx: add initial clock framework support (2013-12-16
> 07:34:52 -0600)
> 
> ----------------------------------------------------------------
> Alex Elder (2):
>       clk: bcm281xx: define kona clock binding
>       clk: bcm281xx: add initial clock framework support
> 
>  .../devicetree/bindings/clock/bcm-kona-clock.txt   |   93 ++
>  drivers/clk/Kconfig                                |    1 +
>  drivers/clk/Makefile                               |    1 +
>  drivers/clk/bcm/Kconfig                            |    8 +
>  drivers/clk/bcm/Makefile                           |    3 +
>  drivers/clk/bcm/clk-bcm281xx.c                     |  416 ++++++++
>  drivers/clk/bcm/clk-kona-setup.c                   |  769 +++++++++++++++
>  drivers/clk/bcm/clk-kona.c                         | 1033
> ++++++++++++++++++++
>  drivers/clk/bcm/clk-kona.h                         |  414 ++++++++
>  include/dt-bindings/clock/bcm281xx.h               |   65 ++
>  10 files changed, 2803 insertions(+)
>  create mode 100644
> Documentation/devicetree/bindings/clock/bcm-kona-clock.txt
>  create mode 100644 drivers/clk/bcm/Kconfig
>  create mode 100644 drivers/clk/bcm/Makefile
>  create mode 100644 drivers/clk/bcm/clk-bcm281xx.c
>  create mode 100644 drivers/clk/bcm/clk-kona-setup.c
>  create mode 100644 drivers/clk/bcm/clk-kona.c
>  create mode 100644 drivers/clk/bcm/clk-kona.h
>  create mode 100644 include/dt-bindings/clock/bcm281xx.h