Re: [PATCH v5 8/8] ARM: brcmstb: dts: add a reference DTS for Broadcom 7445

[Mark Rutland <mark.rutland@arm.com>]

On Wed, Jan 22, 2014 at 03:30:52AM +0000, Marc Carino wrote:
> Add a sample DTS which will allow bootup of a board populated
> with the BCM7445 chip.
> 
> Signed-off-by: Marc Carino <marc.ceeeee@gmail.com>
> Acked-by: Florian Fainelli <f.fainelli@gmail.com>
> ---
>  arch/arm/boot/dts/bcm7445.dts |  111 +++++++++++++++++++++++++++++++++++++++++
>  1 files changed, 111 insertions(+), 0 deletions(-)
>  create mode 100644 arch/arm/boot/dts/bcm7445.dts
> 
> diff --git a/arch/arm/boot/dts/bcm7445.dts b/arch/arm/boot/dts/bcm7445.dts
> new file mode 100644
> index 0000000..ffa3305
> --- /dev/null
> +++ b/arch/arm/boot/dts/bcm7445.dts
> @@ -0,0 +1,111 @@
> +/dts-v1/;
> +/include/ "skeleton.dtsi"
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	model = "Broadcom STB (bcm7445)";
> +	compatible = "brcm,bcm7445", "brcm,brcmstb";
> +	interrupt-parent = <&gic>;
> +
> +	chosen {};
> +
> +	memory {
> +		device_type = "memory";
> +		reg = <0x00 0x00000000 0x00 0x40000000>,
> +		      <0x00 0x40000000 0x00 0x40000000>,
> +		      <0x00 0x80000000 0x00 0x40000000>;
> +	};

As I commented on v3 [1], these are contiguous and can be described with
a single entry:

memory {
	device_type = "memory";
	reg = <0x0 0x00000000 0x0 0xc0000000>;
};

Is there any reason to have three entries?

Thanks,
Mark.

[1] http://lists.infradead.org/pipermail/linux-arm-kernel/2014-January/225899.html