Re: [RFC] dt-bindings: configuration of parent clocks and clock frequency

[Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

Quoting Marek Szyprowski (2014-02-04 04:16:07)
> Hello,
> 
> On 2014-02-01 04:06, Mike Turquette wrote:
> > Quoting Sylwester Nawrocki (2014-01-21 04:48:43)
> > > 5. Similarly to the regulator bindings the clock names could be appended
> > >   to name of a DT property:
> > >
> > >  [clk_name]-assigned-clock-parent = <...>;
> > >  [clk_name]-assigned-clock-rate = <...>;
> >
> > I have always been partial to the way that the reg framework does its
> > [reg_name]-supply. We could shorten it to something like:
> >
> > [clk-name]-asn-parent = ....
> > [clk-name]-asn-rate = ...
> >
> > This is actually the format that was discussed at the ARM kernel summit
> > IIRC.
> 
> I think that "[clk-name]-clk-parent" and "[clk-name]-clk-rate" will be a bit
> more descriptive names instead of quite ambiguous "asn".

+1

Regards,
Mike

> 
> Best regards
> -- 
> Marek Szyprowski, PhD
> Samsung R&D Institute Poland
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html