Re: [RFC/PATCH 1/1] mtd: nand: Add a devicetree binding for ECC strength and ECC step sizeç

[Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

On Wed, Feb 12, 2014 at 12:00:14AM -0800, Brian Norris wrote:
> Hi Ezequiel,
> 
> On Fri, Jan 17, 2014 at 09:13:40AM -0300, Ezequiel Garcia wrote:
> > Some flashes can only be properly accessed when the ECC mode is
> > specified, and a way to describe such mode is required.
> > 
> > Such ECC mode is completely driver-specific so instead of having one binding
> > per compatible-string, let's add generic ECC strength and ECC step size.
> > Driver's can choose the appropriate ECC mode, based on this specification.
> > 
> > Signed-off-by: Ezequiel Garcia <ezequiel.garcia-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> > ---
> >  Documentation/devicetree/bindings/mtd/nand.txt | 4 ++++
> >  1 file changed, 4 insertions(+)
> > 
> > diff --git a/Documentation/devicetree/bindings/mtd/nand.txt b/Documentation/devicetree/bindings/mtd/nand.txt
> > index 03855c8..683a310 100644
> > --- a/Documentation/devicetree/bindings/mtd/nand.txt
> > +++ b/Documentation/devicetree/bindings/mtd/nand.txt
> > @@ -3,5 +3,9 @@
> >  - nand-ecc-mode : String, operation mode of the NAND ecc mode.
> >    Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
> >    "soft_bch".
> > +- nand-ecc-strength : integer ECC required strength.
> > +- nand-ecc-size : integer step size associated to the ECC strength.
> 
> Probably should be nand-ecc-step-size, to be clearer.
> 

No problem.

> > +  The exact meaning of the ECC strength and ECC size parameters is completely
> > +  driver-specific.
> 
> I think we can be much more specific than this. We need to at least
> describe how the strength and size are related, and we need to mention
> how this represents the ECC scheme to use, rather than the minimum
> requirement of the flash.
> 
> I'd say something like this. Feel free to improve it, but it covers the
> gist of what I think we can say in a generic document:
> 
>  - nand-ecc-strength: integer representing the number of bits to correct
>    per ECC step
>  - nand-ecc-step-size: integer representing the number of data bytes
>    that are covered by a single ECC step
> 
>    Together, the ECC strength and step size define the correction
>    capability, so that we say we will correct "X bit errors per Y
>    bytes". The interpretation of these parameters is
>    implementation-defined, but they often have ramifications on the
>    formation, interpretation, and placement of correction metadata on
>    the flash. Not all implementations must support all possible
>    combinations. Implementations are encouraged to further define the
>    value(s) they support.
> 

Much better, thanks!
-- 
Ezequiel García, Free Electrons
Embedded Linux, Kernel and Android Engineering
http://free-electrons.com
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html