devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Simon Horman <horms-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
To: Geert Uytterhoeven
	<geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>,
	Kuninori Morimoto
	<kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org>
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Geert Uytterhoeven
	<geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>,
	Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
Subject: Re: [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings
Date: Thu, 13 Feb 2014 14:56:01 +0900	[thread overview]
Message-ID: <20140213055600.GF17183@verge.net.au> (raw)
In-Reply-To: <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>

Hi Morimoto-san,

could you test this series as Geert does not have access to a bockw board?

On Tue, Feb 11, 2014 at 09:56:47AM +0100, Geert Uytterhoeven wrote:
> From: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
> 
> Binding documentation:
>   - Add future-proof "renesas,hspi-<soctype>" compatible values,
>   - Add "interrupt-parent", "#address-cells" and "#size-cells" properties,
>   - Add reference to pinctrl documentation,
>   - Add example bindings.
> 
> r8a7778 and r8a7779 dtsi:
>   - Add "renesas,hspi-r8a7778" resp. "renesas,hspi-r8a7779" compatible
>     values,
>   - Correct reference to parent interrupt controller
>     (use "interrupt-parent" instead of "interrupt-controller"),
>   - Add missing "#address-cells" and "#size-cells" properties, which are
>     needed when populating the SPI buses.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
> Cc: Mark Brown <broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
> Untested due to lack of hardware
> 
>  Documentation/devicetree/bindings/spi/sh-hspi.txt |   27 ++++++++++++++++++---
>  arch/arm/boot/dts/r8a7778.dtsi                    |   18 +++++++++-----
>  arch/arm/boot/dts/r8a7779.dtsi                    |   18 +++++++++-----
>  3 files changed, 48 insertions(+), 15 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/spi/sh-hspi.txt b/Documentation/devicetree/bindings/spi/sh-hspi.txt
> index 30b57b1c8a13..d43080eb6b3a 100644
> --- a/Documentation/devicetree/bindings/spi/sh-hspi.txt
> +++ b/Documentation/devicetree/bindings/spi/sh-hspi.txt
> @@ -1,7 +1,28 @@
>  Renesas HSPI.
>  
>  Required properties:
> -- compatible : 	"renesas,hspi"
> -- reg : Offset and length of the register set for the device
> -- interrupts : interrupt line used by HSPI
> +- compatible       : "renesas,hspi-<soctype>", "renesas,hspi" as fallback.
> +		     Examples of valid soctypes are "r8a7778" (R-Car M1),
> +		     and "r8a7779" (R-Car H1)
> +- reg              : Offset and length of the register set for the device
> +- interrupt-parent : The phandle for the interrupt controller that
> +		     services interrupts for this device
> +- interrupts       : Interrupt specifier
> +- #address-cells   : Must be <1>
> +- #size-cells      : Must be <0>
> +
> +Pinctrl properties might be needed, too.  See
> +Documentation/devicetree/bindings/pinctrl/renesas,*.
> +
> +Example:
> +
> +	hspi0: spi@fffc7000 {
> +		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
> +		reg = <0xfffc7000 0x18>;
> +		interrupt-parent = <&gic>;
> +		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		status = "disabled";
> +	};
>  
> diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi
> index 85c5b3b99f5e..3c6fab5c9702 100644
> --- a/arch/arm/boot/dts/r8a7778.dtsi
> +++ b/arch/arm/boot/dts/r8a7778.dtsi
> @@ -204,26 +204,32 @@
>  	};
>  
>  	hspi0: spi@fffc7000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
>  		reg = <0xfffc7000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  
>  	hspi1: spi@fffc8000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
>  		reg = <0xfffc8000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  
>  	hspi2: spi@fffc6000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7778", "renesas,hspi";
>  		reg = <0xfffc6000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  };
> diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi
> index d0561d4c7c46..8b1a336ee401 100644
> --- a/arch/arm/boot/dts/r8a7779.dtsi
> +++ b/arch/arm/boot/dts/r8a7779.dtsi
> @@ -256,26 +256,32 @@
>  	};
>  
>  	hspi0: spi@fffc7000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
>  		reg = <0xfffc7000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  
>  	hspi1: spi@fffc8000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
>  		reg = <0xfffc8000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  
>  	hspi2: spi@fffc6000 {
> -		compatible = "renesas,hspi";
> +		compatible = "renesas,hspi-r8a7779", "renesas,hspi";
>  		reg = <0xfffc6000 0x18>;
> -		interrupt-controller = <&gic>;
> +		interrupt-parent = <&gic>;
>  		interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
>  		status = "disabled";
>  	};
>  };
> -- 
> 1.7.9.5
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2014-02-13  5:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-02-11  8:56 [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings Geert Uytterhoeven
     [not found] ` <1392109008-29941-1-git-send-email-geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org>
2014-02-11  8:56   ` [PATCH 2/2] ARM: shmobile: bockw reference dts: Add SPI FLASH Geert Uytterhoeven
2014-02-13  5:56   ` Simon Horman [this message]
     [not found]     ` <20140213055600.GF17183-/R6kz+dDXgpPR4JQBCEnsQ@public.gmane.org>
2014-02-13  7:11       ` [PATCH 1/2] ARM: shmobile: r8a7778/r8a7779 dtsi: Improve and correct HSPI bindings Kuninori Morimoto
     [not found]         ` <87zjlvbi7l.wl%kuninori.morimoto.gx-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-02-13  8:31           ` Geert Uytterhoeven
2014-02-13  9:02             ` Kuninori Morimoto

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140213055600.GF17183@verge.net.au \
    --to=horms-/r6kz+ddxgppr4jqbcensq@public.gmane.org \
    --cc=broonie-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=geert+renesas-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
    --cc=geert-Td1EMuHUCqxL1ZNQvxDV9g@public.gmane.org \
    --cc=kuninori.morimoto.gx-zM6kxYcvzFBBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-sh-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).