From mboxrd@z Thu Jan 1 00:00:00 1970 From: David =?utf-8?q?Lanzend=C3=B6rfer?= Subject: [PATCH v7 0/8] ARM: sunxi: Add driver for SD/MMC hosts found on allwinner sunxi SOCs Date: Mon, 17 Feb 2014 11:02:08 +0100 Message-ID: <20140217095907.15040.81893.stgit@pagira.o2s.ch> Reply-To: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: quoted-printable Return-path: List-Post: , List-Help: , List-Archive: Sender: linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org List-Subscribe: , List-Unsubscribe: , To: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Ulf Hansson , Laurent Pinchart , Mike Turquette , Simon Baatz , Hans de Goede , Emilio =?utf-8?b?TMOzcGV6?= , linux-mmc-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Chris Ball , linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, H Hartley Sweeten , linux-sunxi-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org, Tejun Heo , Maxime Ripard , Guennadi Liakhovetski , linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org List-Id: devicetree@vger.kernel.org Hello The following patchset adds support for the SD/MMC host found in the Allwin= ner SoCs. It contains all the necessary modifications for clock environment and also = the device tree script modification which add it to all the boards using it. The clock environment function needed for phase offset configuration has been proposed and implemented by Emilio. A lot of work and cleanup has been done by Hans de Goede. Special thanks to= him! This patchset is the 4th attempt to send this driver upstream. Changes since v1: -Using mmc_of_parse instead of diy dt parsing -Adding nodes for all mmc controller to the dtsi files, including sofar unused controllers -Using generic GPIO slot library for WP/CD -Adding additional MMC device nodes into DTSI files Changes since v2: -Add missing Signed-off-by tags -Stop using __raw_readl / __raw_writel so that barriers are properly used -Adding missing new lines -Adding missing patch for automatic reparenting of clocks Changes since v3: -Move clk_enable / disable into host_init / exit (Hans) -Fix hang on boot caused by irq storm (Hans) Changes since v4: -moving sunxi-mci.{c/h} to sunxi-mmc.{c/h} -removing camel cases from the defines in sunxi-mmc.h -moving defines out of the struct definition since this is bad coding style -adding documentation for the device tree binding Changes since v5: -adding host initialization for when the sdio irq is enabled (just to make sure having a defined state at all time) -add mmc support fixup: set pullup on cd pins -fixup: Don't set MMC_CAP_NEEDS_POLL / MMC_CAP_4_BIT_DATA Changes since v6: -fixing copyright info in sunxi-mmc.* -s/__SUNXI_MCI_H__/__SUNXI_MMC_H__/g -s/SDXC_RESPONSE_/SDXC_RESP_/g -s/define/definitions <- Comment from Priit Laes --- David Lanzend=C3=B6rfer (5): ARM: sunxi: Add driver for SD/MMC hosts found on Allwinner sunxi SoCs ARM: dts: sun7i: Add support for mmc ARM: dts: sun4i: Add support for mmc ARM: dts: sun5i: Add support for mmc ARM: sunxi: Add documentation for driver for SD/MMC hosts found on Al= lwinner sunxi SoCs Emilio L=C3=B3pez (2): clk: sunxi: factors: automatic reparenting support clk: sunxi: Implement MMC phase control Hans de Goede (1): ARM: sunxi: clk: export clk_sunxi_mmc_phase_control .../devicetree/bindings/mmc/sunxi-mmc.txt | 32 + arch/arm/boot/dts/sun4i-a10-a1000.dts | 8=20 arch/arm/boot/dts/sun4i-a10-cubieboard.dts | 8=20 arch/arm/boot/dts/sun4i-a10.dtsi | 54 + arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts | 30 + arch/arm/boot/dts/sun5i-a10s.dtsi | 44 + arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts | 15=20 arch/arm/boot/dts/sun5i-a13-olinuxino.dts | 15=20 arch/arm/boot/dts/sun5i-a13.dtsi | 37 + arch/arm/boot/dts/sun7i-a20-cubieboard2.dts | 8=20 arch/arm/boot/dts/sun7i-a20-cubietruck.dts | 8=20 arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts | 23 + arch/arm/boot/dts/sun7i-a20.dtsi | 61 + drivers/clk/sunxi/clk-factors.c | 36 + drivers/clk/sunxi/clk-sunxi.c | 35 + drivers/mmc/host/Kconfig | 7=20 drivers/mmc/host/Makefile | 2=20 drivers/mmc/host/sunxi-mmc.c | 876 ++++++++++++++++= ++++ drivers/mmc/host/sunxi-mmc.h | 239 +++++ include/linux/clk/sunxi.h | 22 + 20 files changed, 1560 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/sunxi-mmc.txt create mode 100644 drivers/mmc/host/sunxi-mmc.c create mode 100644 drivers/mmc/host/sunxi-mmc.h create mode 100644 include/linux/clk/sunxi.h --=20 Signature --=20 You received this message because you are subscribed to the Google Groups "= linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an e= mail to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org For more options, visit https://groups.google.com/groups/opt_out.