From mboxrd@z Thu Jan 1 00:00:00 1970 From: Tony Lindgren Subject: Re: [PATCH 5/5] ARM: dts: AM33XX: Add ecap interrupt properties Date: Fri, 28 Feb 2014 14:43:07 -0800 Message-ID: <20140228224307.GP13624@atomide.com> References: <1391029199-3670-1-git-send-email-mporter@linaro.org> <1391029199-3670-6-git-send-email-mporter@linaro.org> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <1391029199-3670-6-git-send-email-mporter-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org> Sender: linux-iio-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Matt Porter Cc: Jonathan Cameron , Grant Likely , Rob Herring , Benoit Cousson , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , Thierry Reding , linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Linux Kernel Mailing List , Devicetree List , linux-pwm-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, Linux OMAP List , Linux ARM Kernel List , Linaro Patches List-Id: devicetree@vger.kernel.org * Matt Porter [140129 13:02]: > Add missing interrupt properties to the ecap0, ecap1, and ecap2 > nodes. > > Signed-off-by: Matt Porter Thanks taking this patch only into omap-for-v3.15/dt, the rest should go via the driver mailing lists. Regards, Tony > --- > arch/arm/boot/dts/am33xx.dtsi | 6 ++++++ > 1 file changed, 6 insertions(+) > > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi > index 6d95d3d..b4139ba 100644 > --- a/arch/arm/boot/dts/am33xx.dtsi > +++ b/arch/arm/boot/dts/am33xx.dtsi > @@ -582,6 +582,8 @@ > compatible = "ti,am33xx-ecap"; > #pwm-cells = <3>; > reg = <0x48300100 0x80>; > + interrupts = <31>; > + interrupt-names = "ecap0"; > ti,hwmods = "ecap0"; > status = "disabled"; > }; > @@ -610,6 +612,8 @@ > compatible = "ti,am33xx-ecap"; > #pwm-cells = <3>; > reg = <0x48302100 0x80>; > + interrupts = <47>; > + interrupt-names = "ecap1"; > ti,hwmods = "ecap1"; > status = "disabled"; > }; > @@ -638,6 +642,8 @@ > compatible = "ti,am33xx-ecap"; > #pwm-cells = <3>; > reg = <0x48304100 0x80>; > + interrupts = <61>; > + interrupt-names = "ecap2"; > ti,hwmods = "ecap2"; > status = "disabled"; > }; > -- > 1.8.4 >