Re: [PATCH v5 0/6] Make dwc3 use Generic PHY Framework

[Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2103 bytes --]

Hi,

On Mon, Mar 03, 2014 at 05:08:09PM +0530, Kishon Vijay Abraham I wrote:
> Added support for optional PHY in dwc3 as not all SoCs having PHYs for DWC3
> should be programmed. While this can be considered as a temporary fix,
> a long term solution would be to add 'nop' PHY for platforms that does
> not have programmable PHY.
> Adapted DWC3 and USB3 PHY to use Generic PHY framework. Also changed the
> name of USB3 PHY driver to PIPE3 PHY driver since the same driver has to
> be used for SATA and PCIE too.
> 
> Changes from v4: (sending the entire patch series again)
> * check the return values of phy_init and phy_power_on
> * print errors if power_on or power_off of PHY fails.
> 
> Changes from v3: (Sent only adapt dwc3 core to use Generic PHY Framework) 
> * avoided using quirks and rely on the return values of PHY APIs to find the
> presence of PHY.
> 
> Changes from v2:
> * added a couple of fixes. One is invoking phy_resume after phy_init and the
> other is power off phy in error patch
> * used quirks to identify if a particular platform does not have PHYs
> * removed using separate header for pipe3 driver and also removed all referencs
> to SATA and PCIe in pipe3 driver since it's not yet adapted for those drivers.
> 
> Changes from v1:
> * The logic in which the driver detects the presence of PHYs has changed.
> * patch ordering has changed
> * udelay is replaced with usleep_range
> * A patch to remove set_suspend callback which was deferred from Generic
> PHY Framework series has been included.
> 
> Kishon Vijay Abraham I (6):
>   usb: dwc3: core: support optional PHYs
>   usb: dwc3: adapt dwc3 core to use Generic PHY Framework
>   drivers: phy: usb3/pipe3: Adapt pipe3 driver to Generic PHY Framework
>   usb: phy: omap-usb2: remove *set_suspend* callback from omap-usb2
>   phy: omap-usb2: move omap_usb.h from linux/usb/ to linux/phy/
>   arm/dts: added dt properties to adapt to the new phy framwork

patches 1 and 2 are in my testing/next, I guess 3,4,5 and 6 have no
direct dependency on those, right ?

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]