Re: [PATCH 1/4] phy: miphy365x: Add Device Tree bindings for the MiPHY365x

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

> > > +Specifying phy control of devices
> > > +=================================
> > > +
> > > +Device nodes should specify the configuration required in their "phys"
> > > +property, containing a phandle to the miphy device node, a port number
> > > +and a device type.
> > > +
> > > +Example:
> > > +
> > > +#include <dt-bindings/phy/phy-miphy365x.h>
> > > +
> > > +	sata0: sata@fe380000 {
> > > +		...
> > > +		phys	  = <&miphy365x_phy MIPHY_PORT_0 MIPHY_TYPE_SATA>;
> > > +		...
> > > +	};
> > 
> > Is there not a generic phy binding we can point to? It seems a bit
> > redundant to do this in each phy binding.
> 
> Sure, but that wouldn't make much of an example.
> 
>   Documentation/devicetree/bindings/phy/phy-bindings.txt

Ah sorry, I see what you mean now.

No, not yet. That's the next thing to go up into Mainline.

I will replace this second example with a link when the other
documentation document has been accepted.

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html