* [PATCH 1/4] ARM: dts: OMAP36xx: Add device node for ABB
2014-01-29 23:46 [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Nishanth Menon
@ 2014-01-29 23:46 ` Nishanth Menon
2014-01-29 23:46 ` [PATCH 2/4] ARM: dts: OMAP4: Add device nodes " Nishanth Menon
` (3 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Nishanth Menon @ 2014-01-29 23:46 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-omap,
Andrii.Tseglytskyi, Nishanth Menon
From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
Add ABB device node for OMAP36xx family of devices. Data is based on
OMAP36XX Technical Reference Manual revision AB (Dec 2012).
[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
arch/arm/boot/dts/omap36xx.dtsi | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 7e8dee9..ba077cd 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -39,6 +39,26 @@
clock-frequency = <48000000>;
};
+ abb_mpu_iva: regulator-abb-mpu {
+ compatible = "ti,abb-v1";
+ regulator-name = "abb_mpu_iva";
+ #address-cell = <0>;
+ #size-cells = <0>;
+ reg = <0x483072f0 0x8>, <0x48306818 0x4>;
+ reg-names = "base-address", "int-address";
+ ti,tranxdone-status-mask = <0x4000000>;
+ clocks = <&sys_ck>;
+ ti,settling-time = <30>;
+ ti,clock-cycles = <8>;
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1012500 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1325000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ >;
+ };
+
omap3_pmx_core2: pinmux@480025a0 {
compatible = "ti,omap3-padconf", "pinctrl-single";
reg = <0x480025a0 0x5c>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 2/4] ARM: dts: OMAP4: Add device nodes for ABB
2014-01-29 23:46 [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Nishanth Menon
2014-01-29 23:46 ` [PATCH 1/4] ARM: dts: OMAP36xx: Add device node for ABB Nishanth Menon
@ 2014-01-29 23:46 ` Nishanth Menon
2014-01-29 23:46 ` [PATCH 3/4] ARM: dts: OMAP5: " Nishanth Menon
` (2 subsequent siblings)
4 siblings, 0 replies; 8+ messages in thread
From: Nishanth Menon @ 2014-01-29 23:46 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-omap,
Andrii.Tseglytskyi, Nishanth Menon
From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
Add ABB device nodes for OMAP443x family of devices. abb_iva is
populated, but disabled as it is not used on current OMAP443x family,
but the node is used on OMAP446x family. Data is based on OMAP443x
Technical Reference Manual revision AN (April 2013).
ABB device nodes for OMAP4460 device Data is based on OMAP4460
Technical Reference Manual revision Z (April 2013)
[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
arch/arm/boot/dts/omap4.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/omap443x.dtsi | 26 ++++++++++++++++++++++++++
arch/arm/boot/dts/omap4460.dtsi | 37 +++++++++++++++++++++++++++++++++++++
3 files changed, 89 insertions(+)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index d3f8a6e..72e6bd7 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -757,6 +757,32 @@
dmas = <&sdma 117>, <&sdma 116>;
dma-names = "tx", "rx";
};
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
+
+ abb_iva: regulator-abb-iva {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_iva";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ ti,tranxdone-status-mask = <0x80000000>;
+ clocks = <&sys_clkin_ck>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ status = "disabled";
+ };
};
};
diff --git a/arch/arm/boot/dts/omap443x.dtsi b/arch/arm/boot/dts/omap443x.dtsi
index 8c1cfad..0adfa1d 100644
--- a/arch/arm/boot/dts/omap443x.dtsi
+++ b/arch/arm/boot/dts/omap443x.dtsi
@@ -43,6 +43,32 @@
#thermal-sensor-cells = <0>;
};
};
+
+ ocp {
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>;
+ reg-names = "base-address", "int-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0 0 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ /* Default unused, just provide register info for record */
+ abb_iva: regulator-abb-iva {
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>;
+ reg-names = "base-address", "int-address";
+ };
+
+ };
+
};
/include/ "omap443x-clocks.dtsi"
diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi
index 6b32f52..194f9ef 100644
--- a/arch/arm/boot/dts/omap4460.dtsi
+++ b/arch/arm/boot/dts/omap4460.dtsi
@@ -50,7 +50,44 @@
#thermal-sensor-cells = <0>;
};
+
+ abb_mpu: regulator-abb-mpu {
+ status = "okay";
+
+ reg = <0x4a307bd0 0x8>, <0x4a306014 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1025000 0 0 0 0 0
+ 1200000 0 0 0 0 0
+ 1313000 0 0 0x100000 0x40000 0
+ 1375000 1 0 0 0 0
+ 1389000 1 0 0 0 0
+ >;
+ };
+
+ abb_iva: regulator-abb-iva {
+ status = "okay";
+
+ reg = <0x4a307bd8 0x8>, <0x4a306010 0x4>,
+ <0x4A002268 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address";
+
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 950000 0 0 0 0 0
+ 1140000 0 0 0 0 0
+ 1291000 0 0 0x200000 0 0
+ 1375000 1 0 0 0 0
+ 1376000 1 0 0 0 0
+ >;
+ };
};
+
};
/include/ "omap446x-clocks.dtsi"
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* [PATCH 3/4] ARM: dts: OMAP5: Add device nodes for ABB
2014-01-29 23:46 [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Nishanth Menon
2014-01-29 23:46 ` [PATCH 1/4] ARM: dts: OMAP36xx: Add device node for ABB Nishanth Menon
2014-01-29 23:46 ` [PATCH 2/4] ARM: dts: OMAP4: Add device nodes " Nishanth Menon
@ 2014-01-29 23:46 ` Nishanth Menon
2014-02-20 16:36 ` Nishanth Menon
2014-01-29 23:46 ` [PATCH 4/4] ARM: dts: DRA7: " Nishanth Menon
2014-03-05 19:47 ` [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Tony Lindgren
4 siblings, 1 reply; 8+ messages in thread
From: Nishanth Menon @ 2014-01-29 23:46 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren
Cc: Nishanth Menon, devicetree, Andrii.Tseglytskyi, linux-kernel,
linux-omap, linux-arm-kernel
From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
Add ABB device nodes for OMAP5 family of devices. Data is based on
OMAP543x Technical Reference Manual revision U (April 2013).
NOTE: clock node has been disabled in this patch due to the lack of
OMAP5 clock data.
[nm@ti.com: co-developer]
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
---
arch/arm/boot/dts/omap5.dtsi | 63 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 63 insertions(+)
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index a72813a..6159f20 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -801,6 +801,69 @@
#thermal-sensor-cells = <1>;
};
+
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
+ <0x4a0021ac 0x18>, <0x4ae0C318 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 880000 0 0x4 0 0x20000000 0x1F000000
+ 1060000 0 0x8 0 0x20000000 0x1F000000
+ 1250000 0 0x10 0 0x20000000 0x1F000000
+ 1260000 1 0x14 0 0x20000000 0x1F000000
+ >;
+ };
+
+ abb_mm: regulator-abb-mm {
+ compatible = "ti,abb-v2";
+ regulator-name = "abb_mm";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
+ <0x4a002194 0x14>, <0x4ae0C314 0x4>;
+ reg-names = "base-address", "int-address",
+ "efuse-address", "ldo-address";
+ ti,tranxdone-status-mask = <0x80000000>;
+ /* LDOVBBMM_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMM_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 880000 0 0x4 0 0x20000000 0x1F000000
+ 1025000 0 0x8 0 0x20000000 0x1F000000
+ 1120000 1 0x10 0 0x20000000 0x1F000000
+ >;
+ };
};
};
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 3/4] ARM: dts: OMAP5: Add device nodes for ABB
2014-01-29 23:46 ` [PATCH 3/4] ARM: dts: OMAP5: " Nishanth Menon
@ 2014-02-20 16:36 ` Nishanth Menon
0 siblings, 0 replies; 8+ messages in thread
From: Nishanth Menon @ 2014-02-20 16:36 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-omap,
Andrii.Tseglytskyi, Nishanth Menon
On 01/29/2014 05:46 PM, Nishanth Menon wrote:
> From: "Andrii.Tseglytskyi" <andrii.tseglytskyi@ti.com>
>
> Add ABB device nodes for OMAP5 family of devices. Data is based on
> OMAP543x Technical Reference Manual revision U (April 2013).
> NOTE: clock node has been disabled in this patch due to the lack of
> OMAP5 clock data.
>
> [nm@ti.com: co-developer]
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Andrii.Tseglytskyi <andrii.tseglytskyi@ti.com>
> ---
I have been informed that there is an fix in TI official documentation
which is due end of this month. So, I have to drop this patch from the
series for the time being - I will refresh this along with necessary
OMAP5 updates once the official documentation is available.
> arch/arm/boot/dts/omap5.dtsi | 63 ++++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 63 insertions(+)
>
> diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
> index a72813a..6159f20 100644
> --- a/arch/arm/boot/dts/omap5.dtsi
> +++ b/arch/arm/boot/dts/omap5.dtsi
> @@ -801,6 +801,69 @@
>
> #thermal-sensor-cells = <1>;
> };
> +
> + abb_mpu: regulator-abb-mpu {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mpu";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07cdc 0x8>, <0x4ae06014 0x4>,
> + <0x4a0021ac 0x18>, <0x4ae0C318 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80>;
> + /* LDOVBBMPU_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMPU_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 880000 0 0x4 0 0x20000000 0x1F000000
> + 1060000 0 0x8 0 0x20000000 0x1F000000
> + 1250000 0 0x10 0 0x20000000 0x1F000000
> + 1260000 1 0x14 0 0x20000000 0x1F000000
> + >;
> + };
> +
> + abb_mm: regulator-abb-mm {
> + compatible = "ti,abb-v2";
> + regulator-name = "abb_mm";
> + #address-cells = <0>;
> + #size-cells = <0>;
> + clocks = <&sys_clkin>;
> + ti,settling-time = <50>;
> + ti,clock-cycles = <16>;
> +
> + reg = <0x4ae07ce4 0x8>, <0x4ae06010 0x4>,
> + <0x4a002194 0x14>, <0x4ae0C314 0x4>;
> + reg-names = "base-address", "int-address",
> + "efuse-address", "ldo-address";
> + ti,tranxdone-status-mask = <0x80000000>;
> + /* LDOVBBMM_MUX_CTRL */
> + ti,ldovbb-override-mask = <0x400>;
> + /* LDOVBBMM_VSET_OUT */
> + ti,ldovbb-vset-mask = <0x1F>;
> +
> + /*
> + * NOTE: only FBB mode used but actual vset will
> + * determine final biasing
> + */
> + ti,abb_info = <
> + /*uV ABB efuse rbb_m fbb_m vset_m*/
> + 880000 0 0x4 0 0x20000000 0x1F000000
> + 1025000 0 0x8 0 0x20000000 0x1F000000
> + 1120000 1 0x10 0 0x20000000 0x1F000000
> + >;
> + };
> };
> };
>
>
--
Regards,
Nishanth Menon
^ permalink raw reply [flat|nested] 8+ messages in thread
* [PATCH 4/4] ARM: dts: DRA7: Add device nodes for ABB
2014-01-29 23:46 [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Nishanth Menon
` (2 preceding siblings ...)
2014-01-29 23:46 ` [PATCH 3/4] ARM: dts: OMAP5: " Nishanth Menon
@ 2014-01-29 23:46 ` Nishanth Menon
2014-03-05 19:47 ` [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Tony Lindgren
4 siblings, 0 replies; 8+ messages in thread
From: Nishanth Menon @ 2014-01-29 23:46 UTC (permalink / raw)
To: Benoît Cousson, Tony Lindgren
Cc: devicetree, linux-arm-kernel, linux-kernel, linux-omap,
Nishanth Menon
Add ABB device nodes for DRA7 family of devices. Data is based on
DRA7 Technical Reference Manual revision I (Sept 2013)
Signed-off-by: Nishanth Menon <nm@ti.com>
---
Depends on https://patchwork.kernel.org/patch/3530111/
arch/arm/boot/dts/dra7.dtsi | 132 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 132 insertions(+)
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 1fd75aa..23a2a11 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -559,6 +559,138 @@
status = "disabled";
};
+ abb_mpu: regulator-abb-mpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_mpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
+ <0x4ae06014 0x4>, <0x4a003b20 0x8>,
+ <0x4ae0c158 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x80>;
+ /* LDOVBBMPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBMPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1060000 0 0x0 0 0x02000000 0x01F00000
+ 1160000 0 0x4 0 0x02000000 0x01F00000
+ 1210000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_ivahd: regulator-abb-ivahd {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_ivahd";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025cc 0x8>,
+ <0x4a002470 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x40000000>;
+ /* LDOVBBIVA_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBIVA_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_dspeve: regulator-abb-dspeve {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_dspeve";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
+ <0x4ae06010 0x4>, <0x4a0025e0 0x8>,
+ <0x4a00246c 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x20000000>;
+ /* LDOVBBDSPEVE_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBDSPEVE_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1055000 0 0x0 0 0x02000000 0x01F00000
+ 1150000 0 0x4 0 0x02000000 0x01F00000
+ 1250000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
+ abb_gpu: regulator-abb-gpu {
+ compatible = "ti,abb-v3";
+ regulator-name = "abb_gpu";
+ #address-cells = <0>;
+ #size-cells = <0>;
+ clocks = <&sys_clkin1>;
+ ti,settling-time = <50>;
+ ti,clock-cycles = <16>;
+
+ reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
+ <0x4ae06010 0x4>, <0x4a003b08 0x8>,
+ <0x4ae0c154 0x4>;
+ reg-names = "setup-address", "control-address",
+ "int-address", "efuse-address",
+ "ldo-address";
+ ti,tranxdone-status-mask = <0x10000000>;
+ /* LDOVBBGPU_FBB_MUX_CTRL */
+ ti,ldovbb-override-mask = <0x400>;
+ /* LDOVBBGPU_FBB_VSET_OUT */
+ ti,ldovbb-vset-mask = <0x1F>;
+
+ /*
+ * NOTE: only FBB mode used but actual vset will
+ * determine final biasing
+ */
+ ti,abb_info = <
+ /*uV ABB efuse rbb_m fbb_m vset_m*/
+ 1090000 0 0x0 0 0x02000000 0x01F00000
+ 1210000 0 0x4 0 0x02000000 0x01F00000
+ 1280000 0 0x8 0 0x02000000 0x01F00000
+ >;
+ };
+
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
--
1.7.9.5
^ permalink raw reply related [flat|nested] 8+ messages in thread* Re: [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes
2014-01-29 23:46 [PATCH 0/4] ARM: dts: OMAP3630+: Add ABB device nodes Nishanth Menon
` (3 preceding siblings ...)
2014-01-29 23:46 ` [PATCH 4/4] ARM: dts: DRA7: " Nishanth Menon
@ 2014-03-05 19:47 ` Tony Lindgren
[not found] ` <20140305194745.GE7599-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>
4 siblings, 1 reply; 8+ messages in thread
From: Tony Lindgren @ 2014-03-05 19:47 UTC (permalink / raw)
To: Nishanth Menon
Cc: Benoît Cousson, devicetree, linux-arm-kernel, linux-kernel,
linux-omap
* Nishanth Menon <nm@ti.com> [140129 15:48]:
> Now that clock nodes have been merged to master,
> refresh of the series meant for all TI platforms using ABB.
> Originally posted [1], I will restart with v1.
Thanks applying all except for the crossbar ones into
omap-for-v3.15/dt.
Please resend the last three patches once the dependencies
are merged to mainline kernel as otherwise the interrupt
nubers are all wrong without the crossbar driver related
code.
Regards,
Tony
^ permalink raw reply [flat|nested] 8+ messages in thread