Re: [PATCH] ARM: mvebu: add Device Tree for the Armada 385 RD board

[Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>]

> >>> I think you can use aliases to get the order correct, independent of
> >>> how you list them in DT. That should be a lot safer than assuming
> >>> things are instantiated from top to bottom.
> >>
> >> It sounds interesting, how would you do this?
> > 
> > As there already is in armada-370-xp.dtsi
> > 
> >         aliases {
> >                 eth0 = &eth0;
> >                 eth1 = &eth1;
> >         };
> > 
> > 
> > 	eth0: ethernet@70000 {
> > 	}
> >         eth1: ethernet@74000 {
> > 	}
> > 
> > This at least works for i2c devices. The pdev->id is set using the
> > alias number.
> 
> Well I think it doesn't work with ethernet devices because we already do
> this in aramda-38x.dtsi:
> 
> 	aliases {
> 		gpio0 = &gpio0;
> 		gpio1 = &gpio1;
> 		eth0 = &eth0;
> 		eth1 = &eth1;
> 		eth2 = &eth2;
> 	};
> 
> 	eth1: ethernet@30000 {
> 	}
> 	eth2: ethernet@34000 {
> 	}
> 	eth0: ethernet@70000 {
> 	}

Ah, Erm, O.K. 

It seems to be an i2c thing. Take a look at i2c_add_adapter().

        if (dev->of_node) {
                id = of_alias_get_id(dev->of_node, "i2c");
 
You could put something similar into the ethernet driver.

    Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html