From mboxrd@z Thu Jan 1 00:00:00 1970 From: Alexandre Belloni Subject: Re: Re: [PATCH 3/4] ALSA: sound/atmel/ac97c.c: Add device tree support Date: Tue, 15 Apr 2014 01:21:34 +0200 Message-ID: <20140414232134.GB2967@piout.net> References: <1397293707-26890-1-git-send-email-alexanders83@web.de> <5369289.Xz059aMMT6@kongar> <1397299697.719282244@f331.i.mail.ru> <11572820.ByGz2BLudS@kongar> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <11572820.ByGz2BLudS@kongar> Sender: linux-doc-owner@vger.kernel.org To: Alexander Stein Cc: Alexander Shiyan , Mark Rutland , devicetree@vger.kernel.org, Randy Dunlap , Pawel Moll , linux-doc@vger.kernel.org, Takashi Iwai , Ian Campbell , Nicolas Ferre , Jaroslav Kysela , Rob Herring , Kumar Gala , Grant Likely , Jean-Christophe Plagniol-Villard , Andrew Victor , linux-arm-kernel@lists.infradead.org List-Id: devicetree@vger.kernel.org On 13/04/2014 at 10:32:09 +0200, Alexander Stein wrote : > On Saturday 12 April 2014, 14:48:17 wrote Alexander Shiyan: > > Sat, 12 Apr 2014 12:42:18 +0200 =D0=BE=D1=82 Alexander Stein : > > > On Saturday 12 April 2014, 14:31:28 wrote Alexander Shiyan: > > > > Sat, 12 Apr 2014 11:08:26 +0200 =D0=BE=D1=82 Alexander Stein : > > > > > Signed-off-by: Alexander Stein > > > > > --- > > > > > .../devicetree/bindings/sound/atmel_ac97c.txt | 20 ++++= +++++ > > > > > sound/atmel/ac97c.c | 52 ++++= ++++++++++++++++-- > > > > > 2 files changed, 69 insertions(+), 3 deletions(-) > > > > > create mode 100644 Documentation/devicetree/bindings/sound/a= tmel_ac97c.txt > > > > >=20 > > > > > diff --git a/Documentation/devicetree/bindings/sound/atmel_ac= 97c.txt b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt > > > > > new file mode 100644 > > > > > index 0000000..9839403 > > > > > --- /dev/null > > > > > +++ b/Documentation/devicetree/bindings/sound/atmel_ac97c.txt > > > > > @@ -0,0 +1,20 @@ > > > > > +* Atmel AC97 controller > > > > > + > > > > > +Required properties: > > > > > + - compatible: "atmel,atmel_ac97c" > > > > > + - reg: Address and length of the register set for the devi= ce > > > > > + - interrupts: Should contain AC97 interrupt > > > > > + - atmel,reset-pin: GPIO for resetting the codec > > > >=20 > > > > Why standard "gpios" property cannot be used here? > > >=20 > > > I guess they can. I have no experience defining a devicetree bind= ing, so I just stuck to the platformdata member name. > > > If this is the recommended way, I'll gladly change that. > >=20 > > Another question is whether this property should refer to the contr= oller, > > as it is clear that it refers to the codec .... >=20 > AFAICT the codec itself has no representation in the devicetree. It g= ets detected by the controller which uses the reset GPIO. > Yeah, maybe we can already go for ac97-gpios, there. It actually takes = a list of gpios: ac97-sync, ac97-sdata and ac97-reset. You may want to have a look at Documentation/devicetree/bindings/sound/soc-ac97link.txt and snd_soc_set_ac97_ops_of_reset(), snd_soc_ac97_parse_pinctl() in sound/soc/core.c The goal would be to be able to keep the same bindings when switching over to ASoC. --=20 Alexandre Belloni, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com