From mboxrd@z Thu Jan 1 00:00:00 1970 From: Antoine =?iso-8859-1?Q?T=E9nart?= Subject: Re: [PATCH 2/2] ARM: dts: berlin: add GPIO nodes for the BG2Q Date: Tue, 15 Apr 2014 11:35:49 +0200 Message-ID: <20140415093549.GD4584@kwain> References: <1397549245-3338-1-git-send-email-antoine.tenart@free-electrons.com> <1397549245-3338-3-git-send-email-antoine.tenart@free-electrons.com> <534CFA77.9030108@gmail.com> Mime-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Content-Disposition: inline In-Reply-To: <534CFA77.9030108-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Sebastian Hesselbarth Cc: alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org, zmxu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org, jszhang-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org List-Id: devicetree@vger.kernel.org Sebastian, On Tue, Apr 15, 2014 at 11:23:03AM +0200, Sebastian Hesselbarth wrote: > On 04/15/2014 10:07 AM, Antoine T=C3=A9nart wrote: [=E2=80=A6] > >diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/ber= lin2q.dtsi > >index e6e556055dfc..b2625f896bc5 100644 > >--- a/arch/arm/boot/dts/berlin2q.dtsi > >+++ b/arch/arm/boot/dts/berlin2q.dtsi > >@@ -109,6 +109,78 @@ > > ranges =3D <0 0xe80000 0x10000>; > > interrupt-parent =3D <&aic>; > > > >+ gpio0: gpio@0400 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0x0400 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ porta: gpio-controller@0 { >=20 > ePAPR recommended name is even more generic, i.e. "gpio". If > that clashed in any way with other numbered names, I suggest > to rename to "gpio-port" as actually the controller is the > parent node and this represents one port (in the nomenclature > of DW-APB-GPIO). I followed the dwapb GPIO binding documentation, but I think this is a = good idea. I'll update. > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; >=20 > 32 gpio pins for each of the 6 GPIO controllers? Either BG2Q is a GPI= O > beast or it is a mistake :P >=20 > Can you please double-check? Maybe Jisheng can confirm this. > I am fine with using nr-gpios property now, but I guess BG2Q also > has that CONFIG[1,2] registers to actually read out the features > synthesized in? If I find some time, I'll prepare a patch for > dw-apb-gpio to exploit that (optional) information instead of > using nr-gpios. Maybe, that would be nice. Antoine > Otherwise, >=20 > Acked-by: Sebastian Hesselbarth >=20 > >+ reg =3D <0>; > >+ interrupt-controller; > >+ #interrupt-cells =3D <2>; > >+ interrupts =3D <0>; > >+ }; > >+ }; > >+ > >+ gpio1: gpio@0800 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0x0800 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ portb: gpio-controller@1 { > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; > >+ reg =3D <0>; > >+ interrupt-controller; > >+ #interrupt-cells =3D <2>; > >+ interrupts =3D <1>; > >+ }; > >+ }; > >+ > >+ gpio2: gpio@0c00 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0x0c00 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ portc: gpio-controller@2 { > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; > >+ reg =3D <0>; > >+ interrupt-controller; > >+ #interrupt-cells =3D <2>; > >+ interrupts =3D <2>; > >+ }; > >+ }; > >+ > >+ gpio3: gpio@1000 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0x1000 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ portd: gpio-controller@3 { > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; > >+ reg =3D <0>; > >+ interrupt-controller; > >+ #interrupt-cells =3D <2>; > >+ interrupts =3D <3>; > >+ }; > >+ }; > >+ > > timer0: timer@2c00 { > > compatible =3D "snps,dw-apb-timer"; > > reg =3D <0x2c00 0x14>; > >@@ -181,6 +253,36 @@ > > interrupt-parent =3D <&gic>; > > interrupts =3D ; > > }; > >+ > >+ gpio4: gpio@5000 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0x5000 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ porte: gpio-controller@4 { > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; > >+ reg =3D <0>; > >+ }; > >+ }; > >+ > >+ gpio5: gpio@c000 { > >+ compatible =3D "snps,dw-apb-gpio"; > >+ reg =3D <0xc000 0x400>; > >+ #address-cells =3D <1>; > >+ #size-cells =3D <0>; > >+ > >+ portf: gpio-controller@5 { > >+ compatible =3D "snps,dw-apb-gpio-port"; > >+ gpio-controller; > >+ #gpio-cells =3D <2>; > >+ snps,nr-gpios =3D <32>; > >+ reg =3D <0>; > >+ }; > >+ }; > > }; > > > > pinctrl: pinctrl@0 { > > >=20 --=20 Antoine T=C3=A9nart, Free Electrons Embedded Linux, Kernel and Android engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" i= n the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html