Re: [PATCH 3/4] ARM: dts: berlin: add the SDHCI nodes for the BG2Q

[Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>]

On Wed, Apr 16, 2014 at 02:40:10PM +0200, Antoine Ténart wrote:
> Add the SDHCI nodes for the Marvell Berlin BG2Q, using the berlin-sdhci
> driver.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> ---
>  arch/arm/boot/dts/berlin2q.dtsi | 40 ++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 40 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 5925e6a16749..8f897d461460 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -67,6 +67,14 @@
>  		clock-div = <3>;
>  	};
>  
> +	sdio1clk: sdio1clk {
> +		compatible = "fixed-factor-clock";
> +		#clock-cells = <0>;
> +		clocks = <&syspll>;
> +		clock-mult = <1>;
> +		clock-div = <4>;
> +	};
> +
>  	soc {
>  		compatible = "simple-bus";
>  		#address-cells = <1>;
> @@ -75,6 +83,38 @@
>  		ranges = <0 0xf7000000 0x1000000>;
>  		interrupt-parent = <&gic>;
>  
> +		sdhci0: sdhci@ab0000 {
> +			compatible = "marvell,berlin2q-sdhci";
> +			reg = <0xab0000 0x200>;
> +			clocks = <&sdio1clk>;
> +			interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> +			keep-power-in-suspend;
> +			enable-sdio-wakeup;
> +			broken-cd;

Hi Antoine

I would expect these three last properties to be a property of the
board, not the SoC. Or am i missing something?

       Thanks
	Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html