From mboxrd@z Thu Jan 1 00:00:00 1970 From: Jisheng Zhang Subject: Re: [PATCH v2 0/2] ARM: berlin: add GPIO support for the BG2Q Date: Wed, 16 Apr 2014 17:11:12 +0800 Message-ID: <20140416171112.31757110@xhacker> References: <1397634395-7456-1-git-send-email-antoine.tenart@free-electrons.com> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <1397634395-7456-1-git-send-email-antoine.tenart@free-electrons.com> Sender: linux-kernel-owner@vger.kernel.org To: Antoine =?UTF-8?B?VMOpbmFydA==?= Cc: "sebastian.hesselbarth@gmail.com" , "alexandre.belloni@free-electrons.com" , Jimmy Xu , "linux-arm-kernel@lists.infradead.org" , "devicetree@vger.kernel.org" , "linux-kernel@vger.kernel.org" List-Id: devicetree@vger.kernel.org On Wed, 16 Apr 2014 00:46:33 -0700 Antoine T=C3=A9nart wrote: > This series add the support for the GPIOs of the Berlin BG2Q. We use = the > newly integrated dwapb GPIO driver here. >=20 > This applies on top of Alexandre's BG2Q symbol introduction[1] and th= e dwapb > gpio patch fixing IRQ initialization[2]. >=20 > [1] https://patchwork.kernel.org/patch/3876141/ > [2] https://lkml.org/lkml/2014/4/7/96 >=20 > Changes since v1: > - s/gpio-controller@/gpio-port@/ in device tree > - moved ARCH_REQUIRE_GPIOLIB to ARCH_BERLIN in Kconfig >=20 > Antoine T=C3=A9nart (2): > ARM: berlin: add the LIBGPIO as a dependency for the BG2Q > ARM: dts: berlin: add GPIO nodes for the BG2Q >=20 > arch/arm/boot/dts/berlin2q.dtsi | 102 > ++++++++++++++++++++++++++++++++++++++++ arch/arm/mach-berlin/Kconfig > | 1 + 2 files changed, 103 insertions(+) >=20 All the two patches look good Thanks very much