[PATCH 0/6] ARM: berlin: add AHCI support

[PATCH 0/6] ARM: berlin: add AHCI support

[Antoine Ténart]

This series adds the support for Berlin SoCs AHCI controllers. The
controller allows to use the SATA host interface and, for example, the
eSATA port on the BG2Q.

Also enable the eSATA interface on the BG2Q DMP.

Tested on the BG2Q DMP.

Antoine Ténart (6):
  ata: ahci: add AHCI support for Berlin SoCs
  Documentation: bindings: add the berlin-achi compatible to the ahci
    platform
  ARM: berlin: add the AHCI node for the BG2Q
  ARM: berlin: enable the eSATA interface on the BG2Q DMP
  ARM: berlin: add the AHCI node for the BG2
  ARM: berlin: add the AHCI node for the BG2CD

 .../devicetree/bindings/ata/ahci-platform.txt      |   3 +-
 arch/arm/boot/dts/berlin2.dtsi                     |   7 +
 arch/arm/boot/dts/berlin2cd.dtsi                   |   7 +
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts         |   5 +
 arch/arm/boot/dts/berlin2q.dtsi                    |  12 ++
 drivers/ata/Kconfig                                |   9 ++
 drivers/ata/Makefile                               |   1 +
 drivers/ata/ahci_berlin.c                          | 175 +++++++++++++++++++++
 8 files changed, 218 insertions(+), 1 deletion(-)
 create mode 100644 drivers/ata/ahci_berlin.c

-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform

[Antoine Ténart]

The berlin-achi driver allows Berlin SoCs to support their AHCI SATA controller.
Add the compatible to the device tree bindings documentation.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 Documentation/devicetree/bindings/ata/ahci-platform.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
index 48b285ffa3a6..9987b63aaa10 100644
--- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
+++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
@@ -7,7 +7,8 @@ Required properties:
 - compatible        : compatible list, one of "snps,spear-ahci",
                       "snps,exynos5440-ahci", "ibm,476gtr-ahci",
                       "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
-                      "fsl,imx6q-ahci" or "snps,dwc-ahci"
+                      "fsl,imx6q-ahci", "snps,dwc-ahci" or
+		      "marvell,berlin-ahci"
 - interrupts        : <interrupt mapping for SATA IRQ>
 - reg               : <registers mapping>
 
-- 
1.8.3.2

Re: [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform

[Thomas Petazzoni]

Dear Antoine Ténart,

On Tue, 22 Apr 2014 17:38:21 +0200, Antoine Ténart wrote:
> The berlin-achi driver allows Berlin SoCs to support their AHCI SATA controller.
> Add the compatible to the device tree bindings documentation.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>

Typo in the commit title: s/achi/ahci.

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH 2/6] Documentation: bindings: add the berlin-achi compatible to the ahci platform

[Sebastian Hesselbarth]

On 04/22/2014 05:38 PM, Antoine Ténart wrote:
> The berlin-achi driver allows Berlin SoCs to support their AHCI SATA controller.
> Add the compatible to the device tree bindings documentation.
> 
> Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
> ---
>  Documentation/devicetree/bindings/ata/ahci-platform.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index 48b285ffa3a6..9987b63aaa10 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -7,7 +7,8 @@ Required properties:
>  - compatible        : compatible list, one of "snps,spear-ahci",
>                        "snps,exynos5440-ahci", "ibm,476gtr-ahci",
>                        "allwinner,sun4i-a10-ahci", "fsl,imx53-ahci"
> -                      "fsl,imx6q-ahci" or "snps,dwc-ahci"
> +                      "fsl,imx6q-ahci", "snps,dwc-ahci" or
> +		      "marvell,berlin-ahci"

Besides the typo Thomas already mentioned, it looks like the compatibles
are indented by spaces while you have tabs.

Sebastian

>  - interrupts        : <interrupt mapping for SATA IRQ>
>  - reg               : <registers mapping>
>  
> 

[PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Antoine Ténart]

The BG2Q has an AHCI SATA controller. Add the corresponding node
in its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
index 07452a7483fa..8e58aae73365 100644
--- a/arch/arm/boot/dts/berlin2q.dtsi
+++ b/arch/arm/boot/dts/berlin2q.dtsi
@@ -183,6 +183,18 @@
 			};
 		};
 
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin-ahci";
+			reg = <0xe90000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disable";
+		};
+
+		generic-regs@ea0110 {
+			compatible = "marvell,berlin-generic-regs", "syscon";
+			reg = <0xea0110 0x10>;
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Thomas Petazzoni]

Dear Antoine Ténart,

On Tue, 22 Apr 2014 17:38:22 +0200, Antoine Ténart wrote:
> The BG2Q has an AHCI SATA controller. Add the corresponding node
> in its device tree.

I believe the commit log should explain why an apparently unrelated
generic-regs@ node gets added in this commit.

Thanks!

Thomas

> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
> index 07452a7483fa..8e58aae73365 100644
> --- a/arch/arm/boot/dts/berlin2q.dtsi
> +++ b/arch/arm/boot/dts/berlin2q.dtsi
> @@ -183,6 +183,18 @@
>  			};
>  		};
>  
> +		ahci: sata@e90000 {
> +			compatible = "marvell,berlin-ahci";
> +			reg = <0xe90000 0x10000>;
> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disable";
> +		};
> +
> +		generic-regs@ea0110 {
> +			compatible = "marvell,berlin-generic-regs", "syscon";
> +			reg = <0xea0110 0x10>;
> +		};
> +
>  		apb@fc0000 {
>  			compatible = "simple-bus";
>  			#address-cells = <1>;



-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Sebastian Hesselbarth]

On 04/22/2014 06:28 PM, Thomas Petazzoni wrote:
> Dear Antoine Ténart,
> 
> On Tue, 22 Apr 2014 17:38:22 +0200, Antoine Ténart wrote:
>> The BG2Q has an AHCI SATA controller. Add the corresponding node
>> in its device tree.
> 
> I believe the commit log should explain why an apparently unrelated
> generic-regs@ node gets added in this commit.

generic-regs@ is from another patch, please drop it entirely.

Sebastian

>> diff --git a/arch/arm/boot/dts/berlin2q.dtsi b/arch/arm/boot/dts/berlin2q.dtsi
>> index 07452a7483fa..8e58aae73365 100644
>> --- a/arch/arm/boot/dts/berlin2q.dtsi
>> +++ b/arch/arm/boot/dts/berlin2q.dtsi
>> @@ -183,6 +183,18 @@
>>  			};
>>  		};
>>  
>> +		ahci: sata@e90000 {
>> +			compatible = "marvell,berlin-ahci";
>> +			reg = <0xe90000 0x10000>;
>> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
>> +			status = "disable";
>> +		};
>> +
>> +		generic-regs@ea0110 {
>> +			compatible = "marvell,berlin-generic-regs", "syscon";
>> +			reg = <0xea0110 0x10>;
>> +		};
>> +
>>  		apb@fc0000 {
>>  			compatible = "simple-bus";
>>  			#address-cells = <1>;
> 
> 
> 

Re: [PATCH 3/6] ARM: berlin: add the AHCI node for the BG2Q

[Thomas Petazzoni]

Dear Antoine Ténart,

On Tue, 22 Apr 2014 17:38:22 +0200, Antoine Ténart wrote:

> +		ahci: sata@e90000 {
> +			compatible = "marvell,berlin-ahci";
> +			reg = <0xe90000 0x10000>;
> +			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
> +			status = "disable";

Should be:

			status = "disabled";

And ditto for patches 5 and 6.

Thanks,

Thomas
-- 
Thomas Petazzoni, CTO, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 4/6] ARM: berlin: enable the eSATA interface on the BG2Q DMP

[Antoine Ténart]

The BG2Q has an AHCI SATA controller with an eSATA interface. Enable it.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2q-marvell-dmp.dts | 5 +++++
 1 file changed, 5 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
index 2da9c41e29d8..26047ceed603 100644
--- a/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
+++ b/arch/arm/boot/dts/berlin2q-marvell-dmp.dts
@@ -26,3 +26,8 @@
 &uart0 {
 	status = "okay";
 };
+
+&ahci {
+	status = "okay";
+	marvell,force-port-map = <1>;
+};
-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH 5/6] ARM: berlin: add the AHCI node for the BG2

[Antoine Ténart]

The BG2 has an AHCI SATA controller. Add the corresponding node
in its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2.dtsi b/arch/arm/boot/dts/berlin2.dtsi
index 56a1af2f1052..3e98d9fa9ec7 100644
--- a/arch/arm/boot/dts/berlin2.dtsi
+++ b/arch/arm/boot/dts/berlin2.dtsi
@@ -176,6 +176,13 @@
 			};
 		};
 
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin-ahci";
+			reg = <0xe90000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disable";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.8.3.2

Re: [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2

[Jisheng Zhang]

Hi Antoine

On Tue, 22 Apr 2014 08:38:24 -0700
Antoine Ténart <antoine.tenart@free-electrons.com> wrote:

> The BG2 has an AHCI SATA controller. Add the corresponding node
> in its device tree.

The AHCI IP of BG2 is different with BG2Q, so the driver in the series of patch
doesn't work on BG2.

Thanks

Re: [PATCH 5/6] ARM: berlin: add the AHCI node for the BG2

[Antoine Ténart]

Jisheng,

On Wed, Apr 23, 2014 at 10:45:39AM +0800, Jisheng Zhang wrote:
> On Tue, 22 Apr 2014 08:38:24 -0700
> Antoine Ténart <antoine.tenart@free-electrons.com> wrote:
> 
> > The BG2 has an AHCI SATA controller. Add the corresponding node
> > in its device tree.
> 
> The AHCI IP of BG2 is different with BG2Q, so the driver in the series of patch
> doesn't work on BG2.

Thanks for the info! I'll drop BG2 and BG2CD nodes in the v2.

Antoine

-- 
Antoine Ténart, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD

[Antoine Ténart]

The BG2CD has an AHCI SATA controller. Add the corresponding node
in its device tree.

Signed-off-by: Antoine Ténart <antoine.tenart@free-electrons.com>
---
 arch/arm/boot/dts/berlin2cd.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/berlin2cd.dtsi b/arch/arm/boot/dts/berlin2cd.dtsi
index 094968c27533..3974a5cafccf 100644
--- a/arch/arm/boot/dts/berlin2cd.dtsi
+++ b/arch/arm/boot/dts/berlin2cd.dtsi
@@ -169,6 +169,13 @@
 			};
 		};
 
+		ahci: sata@e90000 {
+			compatible = "marvell,berlin-ahci";
+			reg = <0xe90000 0x10000>;
+			interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disable";
+		};
+
 		apb@fc0000 {
 			compatible = "simple-bus";
 			#address-cells = <1>;
-- 
1.8.3.2


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH 6/6] ARM: berlin: add the AHCI node for the BG2CD

[Jisheng Zhang]

Hi Antoine,

On Tue, 22 Apr 2014 08:38:25 -0700
Antoine Ténart <antoine.tenart@free-electrons.com> wrote:

> The BG2CD has an AHCI SATA controller. Add the corresponding node
> in its device tree.

BG2CD doesn't has AHCI controller. 

Thanks