devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] pci-rcar-gen2: add device tree support
@ 2014-04-07 21:41 Sergei Shtylyov
  2014-04-25 17:45 ` Bjorn Helgaas
  0 siblings, 1 reply; 3+ messages in thread
From: Sergei Shtylyov @ 2014-04-07 21:41 UTC (permalink / raw)
  To: horms, devicetree, robh+dt, pawel.moll, mark.rutland,
	ijc+devicetree, galak, bhelgaas, linux-pci
  Cc: linux-sh, magnus.damm, linux, linux-arm-kernel, ben.dooks,
	linux-doc, rob, grant.likely

From: Ben Dooks <ben.dooks@codethink.co.uk>

Add device tree probing support to the 'pci-rcar-gen2' driver.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[Sergei: numerous fixes/cleanups]
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
The patch is against the 'next' branch of Bjorn Helgaas' 'pci.git' repo.

Changes in version 3:
- added "renesas,pci-r8a7791" to the possible "compatible" property values;
- removed '#ifdef CONFIG_OF' around rcar_pci_of_match[] and hence of_match_ptr()
  invocation too;
- fixed trailing whitespace in the DT parsing code;
- removed the wrong "renessas," prefix from the binding document's file name;
- moved the PCI device sub-nodes from the board example to the SoC example;
- fixed labels in the board example;
- fixed grammar and punctuation in the binding document;
- reworded the changelog, fixed the subject.

Changes in version 2:
- merged the binding document from a separate patch;
- moved to the "bus-range" property parsing;
- added example to the binding document.

 Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt |   54 ++++++++++++++++
 drivers/pci/host/pci-rcar-gen2.c                        |   32 ++++++++-
 2 files changed, 84 insertions(+), 2 deletions(-)

Index: pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
===================================================================
--- /dev/null
+++ pci/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -0,0 +1,54 @@
+Renesas AHB to PCI bridge
+-------------------------
+
+This is the bridge used internally to connect the USB controllers to the
+AHB. There is one bridge instance per USB port connected to the internal
+OHCI and EHCI controllers.
+
+Required properties:
+- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
+	      "renesas,pci-r8a7791" for the R8A7791 SoC.
+- reg:	A list of physical regions to access the device: the first is
+	the operational registers for the OHCI/EHCI controllers and the
+	second is for the bridge configuration and control registers.
+- interrupts: interrupt for the device.
+- clocks: The reference to the device clock.
+- bus-range: The PCI bus number range; as this is a single bus, the range
+	      should be specified as the same value twice.
+
+Example SoC configuration:
+
+	pci0: pci@ee090000  {
+		compatible = "renesas,pci-r8a7790";
+		clocks = <&mstp7_clks R8A7790_CLK_EHCI>;
+		reg = <0x0 0xee090000 0x0 0xc00>,
+		      <0x0 0xee080000 0x0 0x1100>;
+		interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+		status = "disabled";
+
+		bus-range = <0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		pci@0,1 {
+			reg = <0x800 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usbphy 0 0>;
+			phy-names = "usb";
+		};
+
+		pci@0,2 {
+			reg = <0x1000 0 0 0 0>;
+			device_type = "pci";
+			phys = <&usbphy 0 0>;
+			phy-names = "usb";
+		};
+	};
+
+Example board setup:
+
+&pci0 {
+	status = "okay";
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+};
Index: pci/drivers/pci/host/pci-rcar-gen2.c
===================================================================
--- pci.orig/drivers/pci/host/pci-rcar-gen2.c
+++ pci/drivers/pci/host/pci-rcar-gen2.c
@@ -16,6 +16,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/of_pci.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
 #include <linux/sizes.h>
@@ -98,6 +99,7 @@ struct rcar_pci_priv {
 	struct resource io_res;
 	struct resource mem_res;
 	struct resource *cfg_res;
+	unsigned busnr;
 	int irq;
 	unsigned long window_size;
 };
@@ -312,8 +314,8 @@ static int rcar_pci_setup(int nr, struct
 	pci_add_resource(&sys->resources, &priv->io_res);
 	pci_add_resource(&sys->resources, &priv->mem_res);
 
-	/* Setup bus number based on platform device id */
-	sys->busnr = to_platform_device(priv->dev)->id;
+	/* Setup bus number based on platform device id / of bus-range */
+	sys->busnr = priv->busnr;
 	return 1;
 }
 
@@ -366,6 +368,23 @@ static int rcar_pci_probe(struct platfor
 
 	priv->window_size = SZ_1G;
 
+	if (pdev->dev.of_node) {
+		struct resource busnr;
+		int ret;
+
+		ret = of_pci_parse_bus_range(pdev->dev.of_node, &busnr);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "failed to parse bus-range\n");
+			return ret;
+		}
+
+		priv->busnr = busnr.start;
+		if (busnr.end != busnr.start)
+			dev_warn(&pdev->dev, "only one bus number supported\n");
+	} else {
+		priv->busnr = pdev->id;
+	}
+
 	hw_private[0] = priv;
 	memset(&hw, 0, sizeof(hw));
 	hw.nr_controllers = ARRAY_SIZE(hw_private);
@@ -377,11 +396,20 @@ static int rcar_pci_probe(struct platfor
 	return 0;
 }
 
+static struct of_device_id rcar_pci_of_match[] = {
+	{ .compatible = "renesas,pci-r8a7790", },
+	{ .compatible = "renesas,pci-r8a7791", },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, rcar_pci_of_match);
+
 static struct platform_driver rcar_pci_driver = {
 	.driver = {
 		.name = "pci-rcar-gen2",
 		.owner = THIS_MODULE,
 		.suppress_bind_attrs = true,
+		.of_match_table = rcar_pci_of_match,
 	},
 	.probe = rcar_pci_probe,
 };

^ permalink raw reply	[flat|nested] 3+ messages in thread
end of thread, other threads:[~2014-04-25 20:05 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-04-07 21:41 [PATCH] pci-rcar-gen2: add device tree support Sergei Shtylyov
2014-04-25 17:45 ` Bjorn Helgaas
2014-04-25 20:05   ` Arnd Bergmann

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).