Re: [PATCH v2 7/7] dts: dra7-evm: add USB support

[Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1429 bytes --]

On Mon, Apr 28, 2014 at 05:01:27PM +0300, Roger Quadros wrote:
> Add USB pinmux information and USB modes
> for the USB controllers.
> 
> Signed-off-by: Roger Quadros <rogerq-l0cyMroinI0@public.gmane.org>

Reviewed-by: Felipe Balbi <balbi-l0cyMroinI0@public.gmane.org>

> ---
>  arch/arm/boot/dts/dra7-evm.dts | 24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/dra7-evm.dts b/arch/arm/boot/dts/dra7-evm.dts
> index 5babba0..1d77815 100644
> --- a/arch/arm/boot/dts/dra7-evm.dts
> +++ b/arch/arm/boot/dts/dra7-evm.dts
> @@ -93,6 +93,18 @@
>  			0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd */
>  		>;
>  	};
> +
> +	usb1_pins: pinmux_usb1_pins {
> +                pinctrl-single,pins = <
> +			0x280	0xc0000	/* usb1_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
> +                >;
> +        };
> +
> +	usb2_pins: pinmux_usb2_pins {
> +                pinctrl-single,pins = <
> +			0x284	0xc0000 /* usb2_drvvbus, SLOW_SLEW | PULLUPEN | MODE0 */
> +                >;
> +        };
>  };
>  
>  &i2c1 {
> @@ -273,3 +285,15 @@
>  &cpu0 {
>  	cpu0-supply = <&smps123_reg>;
>  };
> +
> +&usb1 {
> +	dr_mode = "peripheral";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb1_pins>;
> +};
> +
> +&usb2 {
> +	dr_mode = "host";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&usb2_pins>;
> +};
> -- 
> 1.8.3.2
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]