edac: altera: Add EDAC support for Altera SDRAM Controller

edac: altera: Add EDAC support for Altera SDRAM Controller

[tthayer-EIB2kfCEclfQT0dZR+AlfA]

This patch adds EDAC support for the Altera CycloneV and ArriaV
SoC SDRAM Controller.

[PATCHv3 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM
[PATCHv3 2/3] dts: socfpga: Add bindings for Altera SoC SDRAM EDAC
[PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[tthayer]

From: Thor Thayer <tthayer@altera.com>

Addition of the Altera SDRAM controller bindings and device
tree changes to the Altera SoC project. The "syscon" parameter
is included here because the SDRAM EDAC bits are shared with the SDRAM
configuration bits.
---
v2: Changes to SoC SDRAM EDAC code.

V3: Implement code suggestions for SDRAM EDAC code.

Signed-off-by: Thor Thayer <tthayer@altera.com>
---
 .../bindings/arm/altera/socfpga-sdram.txt          |   14 ++++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
 2 files changed, 19 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
new file mode 100644
index 0000000..525cb76
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
@@ -0,0 +1,14 @@
+Altera SOCFPGA SDRAM Controller
+
+Required properties:
+- compatible : "altr,sdr-ctl", "syscon";
+                Note that syscon is invoked for this device to support the FPGA
+		bridge driver, EDAC driver and other devices that share the
+		registers.
+- reg : Should contain 1 register ranges(address and length)
+
+Example:
+	sdrctl@ffc25000 {
+		compatible = "altr,sdr-ctl", "syscon";
+		reg = <0xffc25000 0x1000>;
+	};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index df43702..6ce912e 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -676,6 +676,11 @@
 			clocks = <&l4_sp_clk>;
 		};
 
+		sdrctl@ffc25000 {
+			compatible = "altr,sdr-ctl", "syscon";
+			reg = <0xffc25000 0x1000>;
+		};
+
 		rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
-- 
1.7.9.5

Re: [PATCHv3 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[Sören Brinkmann]

Hi Thor,

On Mon, 2014-05-05 at 05:52PM -0500, tthayer@altera.com wrote:
> From: Thor Thayer <tthayer@altera.com>
> 
> Addition of the Altera SDRAM controller bindings and device
> tree changes to the Altera SoC project. The "syscon" parameter
> is included here because the SDRAM EDAC bits are shared with the SDRAM
> configuration bits.
> ---
> v2: Changes to SoC SDRAM EDAC code.
> 
> V3: Implement code suggestions for SDRAM EDAC code.
> 
> Signed-off-by: Thor Thayer <tthayer@altera.com>
> ---
>  .../bindings/arm/altera/socfpga-sdram.txt          |   14 ++++++++++++++
>  arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
>  2 files changed, 19 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> 
> diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> new file mode 100644
> index 0000000..525cb76
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> @@ -0,0 +1,14 @@
> +Altera SOCFPGA SDRAM Controller
> +
> +Required properties:
> +- compatible : "altr,sdr-ctl", "syscon";
> +                Note that syscon is invoked for this device to support the FPGA
> +		bridge driver, EDAC driver and other devices that share the
> +		registers.

This sounds like implementation specifics, which shouldn't be part of
the bindings.

	Sören

Re: [PATCHv3 1/3] dts: socfpga: Add bindings for Altera SoC SDRAM controller

[Thor Thayer]

Hi Sören

On Mon, May 5, 2014 at 6:16 PM, Sören Brinkmann
<soren.brinkmann@xilinx.com> wrote:
>
> Hi Thor,
>
> On Mon, 2014-05-05 at 05:52PM -0500, tthayer@altera.com wrote:
> > From: Thor Thayer <tthayer@altera.com>
> >
> > Addition of the Altera SDRAM controller bindings and device
> > tree changes to the Altera SoC project. The "syscon" parameter
> > is included here because the SDRAM EDAC bits are shared with the SDRAM
> > configuration bits.
> > ---
> > v2: Changes to SoC SDRAM EDAC code.
> >
> > V3: Implement code suggestions for SDRAM EDAC code.
> >
> > Signed-off-by: Thor Thayer <tthayer@altera.com>
> > ---
> >  .../bindings/arm/altera/socfpga-sdram.txt          |   14 ++++++++++++++
> >  arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
> >  2 files changed, 19 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> >
> > diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> > new file mode 100644
> > index 0000000..525cb76
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram.txt
> > @@ -0,0 +1,14 @@
> > +Altera SOCFPGA SDRAM Controller
> > +
> > +Required properties:
> > +- compatible : "altr,sdr-ctl", "syscon";
> > +                Note that syscon is invoked for this device to support the FPGA
> > +             bridge driver, EDAC driver and other devices that share the
> > +             registers.
>
> This sounds like implementation specifics, which shouldn't be part of
> the bindings.
>
>         Sören
>
I see your point and will remove. Thanks!

[PATCHv3 2/3] dts: socfpga: Add bindings for Altera SoC SDRAM EDAC

[tthayer-EIB2kfCEclfQT0dZR+AlfA]

From: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>

Addition of the Altera SDRAM EDAC bindings and device
tree changes to the Altera SoC project.
---
v2: Changes to SoC EDAC source code.

v3: Fix typo in device tree documentation.

Signed-off-by: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
---
 .../bindings/arm/altera/socfpga-sdram-edac.txt     |   12 ++++++++++++
 arch/arm/boot/dts/socfpga.dtsi                     |    5 +++++
 2 files changed, 17 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt

diff --git a/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
new file mode 100644
index 0000000..431e98b
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/altera/socfpga-sdram-edac.txt
@@ -0,0 +1,12 @@
+Altera SOCFPGA SDRAM Error Detection & Correction [EDAC]
+
+Required properties:
+- compatible : should contain "altr,sdram-edac";
+- interrupts : Should contain the SDRAM ECC IRQ in the
+	appropriate format for the IRQ controller.
+
+Example:
+	sdramedac@0 {
+		compatible = "altr,sdram-edac";
+		interrupts = <0 39 4>;
+	};
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 6ce912e..a0ea69b 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -681,6 +681,11 @@
 			reg = <0xffc25000 0x1000>;
 		};
 
+		sdramedac@0 {
+			compatible = "altr,sdram-edac";
+			interrupts = <0 39 4>;
+		};
+
 		rstmgr@ffd05000 {
 			compatible = "altr,rst-mgr";
 			reg = <0xffd05000 0x1000>;
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[tthayer]

From: Thor Thayer <tthayer@altera.com>

---
v2: Use the SDRAM controller registers to calculate memory size
    instead of the Device Tree. Update To & Cc list. Add maintainer
    information.

v3: EDAC driver cleanup based on comments from Mailing list.

Signed-off-by: Thor Thayer <tthayer@altera.com>
---
 MAINTAINERS                |    5 +
 drivers/edac/Kconfig       |    9 +
 drivers/edac/Makefile      |    2 +
 drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
 4 files changed, 427 insertions(+)
 create mode 100644 drivers/edac/altera_edac.c

diff --git a/MAINTAINERS b/MAINTAINERS
index e67ea24..ecd1277 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1290,6 +1290,11 @@ M:	Dinh Nguyen <dinguyen@altera.com>
 S:	Maintained
 F:	drivers/clk/socfpga/
 
+ARM/SOCFPGA SDRAM EDAC SUPPORT
+M:	Thor Thayer <tthayer@altera.com>
+S:	Maintained
+F:	drivers/edac/altera_edac.c
+
 ARM/STI ARCHITECTURE
 M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
 M:	Maxime Coquelin <maxime.coquelin@st.com>
diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
index 878f090..4f4d379 100644
--- a/drivers/edac/Kconfig
+++ b/drivers/edac/Kconfig
@@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
 	  Support for error detection and correction on the
 	  Cavium Octeon family of SOCs.
 
+config EDAC_ALTERA_MC
+	bool "Altera SDRAM Memory Controller EDAC"
+	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
+	help
+	  Support for error detection and correction on the
+	  Altera SDRAM memory controller. Note that the
+	  preloader must initialize the SDRAM before loading
+	  the kernel.
+
 endif # EDAC
diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
index 4154ed6..9741336 100644
--- a/drivers/edac/Makefile
+++ b/drivers/edac/Makefile
@@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
 obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
 obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
 obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
+
+obj-$(CONFIG_EDAC_ALTERA_MC)	        += altera_edac.o
diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
new file mode 100644
index 0000000..e8a3de7
--- /dev/null
+++ b/drivers/edac/altera_edac.c
@@ -0,0 +1,411 @@
+/*
+ *  Copyright Altera Corporation (C) 2014. All rights reserved.
+ *  Copyright 2011-2012 Calxeda, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License.  See the file "COPYING" in the main directory of this archive
+ * for more details.
+
+ *
+ * Adapted from the highbank_mc_edac driver
+ *
+ */
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/edac.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+
+#include "edac_core.h"
+#include "edac_module.h"
+
+#define EDAC_MOD_STR		"altera_edac"
+#define EDAC_VERSION		"1"
+
+/* SDRAM Controller CtrlCfg Register */
+#define CTLCFG			0x00
+
+/* SDRAM Controller CtrlCfg Register Bit Masks */
+#define CTLCFG_ECC_EN		0x400
+#define CTLCFG_ECC_CORR_EN	0x800
+#define CTLCFG_GEN_SB_ERR	0x2000
+#define CTLCFG_GEN_DB_ERR	0x4000
+
+#define CTLCFG_ECC_AUTO_EN	(CTLCFG_ECC_EN | \
+				 CTLCFG_ECC_CORR_EN)
+
+/* SDRAM Controller Address Width Register */
+#define DRAMADDRW		0x2C
+
+/* SDRAM Controller Address Widths Field Register */
+#define DRAMADDRW_COLBIT_MASK	0x001F
+#define DRAMADDRW_COLBIT_LSB	0
+#define DRAMADDRW_ROWBIT_MASK	0x03E0
+#define DRAMADDRW_ROWBIT_LSB	5
+#define DRAMADDRW_BANKBIT_MASK	0x1C00
+#define DRAMADDRW_BANKBIT_LSB	10
+#define DRAMADDRW_CSBIT_MASK	0xE000
+#define DRAMADDRW_CSBIT_LSB	13
+
+/* SDRAM Controller Interface Data Width Register */
+#define DRAMIFWIDTH		0x30
+
+/* SDRAM Controller Interface Data Width Defines */
+#define DRAMIFWIDTH_16B_ECC	24
+#define DRAMIFWIDTH_32B_ECC	40
+
+/* SDRAM Controller DRAM Status Register */
+#define DRAMSTS		0x38
+
+/* SDRAM Controller DRAM Status Register Bit Masks */
+#define DRAMSTS_SBEERR		0x04
+#define DRAMSTS_DBEERR		0x08
+#define DRAMSTS_CORR_DROP	0x10
+
+/* SDRAM Controller DRAM IRQ Register */
+#define DRAMINTR		0x3C
+
+/* SDRAM Controller DRAM IRQ Register Bit Masks */
+#define DRAMINTR_INTREN	0x01
+#define DRAMINTR_SBEMASK	0x02
+#define DRAMINTR_DBEMASK	0x04
+#define DRAMINTR_CORRDROPMASK	0x08
+#define DRAMINTR_INTRCLR	0x10
+
+/* SDRAM Controller Single Bit Error Count Register */
+#define SBECOUNT		0x40
+
+/* SDRAM Controller Single Bit Error Count Register Bit Masks */
+#define SBECOUNT_MASK		0x0F
+
+/* SDRAM Controller Double Bit Error Count Register */
+#define DBECOUNT		0x44
+
+/* SDRAM Controller Double Bit Error Count Register Bit Masks */
+#define DBECOUNT_MASK		0x0F
+
+/* SDRAM Controller ECC Error Address Register */
+#define ERRADDR		0x48
+
+/* SDRAM Controller ECC Error Address Register Bit Masks */
+#define ERRADDR_MASK		0xFFFFFFFF
+
+/* SDRAM Controller ECC Autocorrect Drop Count Register */
+#define DROPCOUNT		0x4C
+
+/* SDRAM Controller ECC Autocorrect Drop Count Register Bit Masks */
+#define DROPCOUNT_MASK		0x0F
+
+/* SDRAM Controller ECC AutoCorrect Address Register */
+#define DROPADDR		0x50
+
+/* SDRAM Controller ECC AutoCorrect Error Address Register Bit Masks */
+#define DROPADDR_MASK		0xFFFFFFFF
+
+/* Altera SDRAM Memory Controller data */
+struct altr_sdram_mc_data {
+	struct regmap *mc_vbase;
+};
+
+static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
+{
+	struct mem_ctl_info *mci = dev_id;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	u32 status = 0, err_count = 0, err_addr = 0;
+
+	/* Error Address is shared by both SBE & DBE */
+	regmap_read(drvdata->mc_vbase, ERRADDR, &err_addr);
+
+	regmap_read(drvdata->mc_vbase, DRAMSTS, &status);
+
+	if (status & DRAMSTS_DBEERR) {
+		regmap_read(drvdata->mc_vbase, DBECOUNT, &err_count);
+		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1, mci->ctl_name, "");
+	}
+	if (status & DRAMSTS_SBEERR) {
+		regmap_read(drvdata->mc_vbase, SBECOUNT, &err_count);
+		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
+				     err_addr >> PAGE_SHIFT,
+				     err_addr & ~PAGE_MASK, 0,
+				     0, 0, -1, mci->ctl_name, "");
+	}
+
+	regmap_write(drvdata->mc_vbase,	DRAMINTR,
+		     (DRAMINTR_INTRCLR | DRAMINTR_INTREN));
+
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_EDAC_DEBUG
+static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
+					    const char __user *data,
+					    size_t count, loff_t *ppos)
+{
+	struct mem_ctl_info *mci = file->private_data;
+	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
+	u32 *ptemp;
+	dma_addr_t dma_handle;
+	u32 reg, read_reg = 0;
+
+	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
+	if (IS_ERR(ptemp)) {
+		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "EDAC Inject: Buffer Allocation error\n");
+		return -ENOMEM;
+	}
+
+	regmap_read(drvdata->mc_vbase, CTLCFG, &read_reg);
+	read_reg &= ~(CTLCFG_GEN_SB_ERR | CTLCFG_GEN_DB_ERR);
+
+	if (count == 3) {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "EDAC Inject Double bit error\n");
+		regmap_write(drvdata->mc_vbase, CTLCFG,
+			     (read_reg | CTLCFG_GEN_DB_ERR));
+	} else {
+		edac_printk(KERN_ALERT, EDAC_MC,
+			    "EDAC Inject Single bit error\n");
+		regmap_write(drvdata->mc_vbase,	CTLCFG,
+			     (read_reg | CTLCFG_GEN_SB_ERR));
+	}
+
+	ptemp[0] = 0x5A5A5A5A;
+	ptemp[1] = 0xA5A5A5A5;
+	regmap_write(drvdata->mc_vbase,	CTLCFG, read_reg);
+	/* Ensure it has been written out */
+	wmb();
+
+	reg = ptemp[0];
+	read_reg = ptemp[1];
+	/* Force Read */
+	rmb();
+
+	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
+
+	return count;
+}
+
+static const struct file_operations altr_sdr_mc_debug_inject_fops = {
+	.open = simple_open,
+	.write = altr_sdr_mc_err_inject_write,
+	.llseek = generic_file_llseek,
+};
+
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{
+	if (mci->debugfs)
+		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
+				    &altr_sdr_mc_debug_inject_fops);
+}
+#else
+static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
+{}
+#endif
+
+/* Get total memory size in bytes */
+static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
+{
+	u32 size;
+	u32 read_reg, row, bank, col, cs, width;
+
+	if (regmap_read(mc_vbase, DRAMADDRW, &read_reg) < 0)
+		return 0;
+
+	if (regmap_read(mc_vbase, DRAMIFWIDTH, &width) < 0)
+		return 0;
+
+	col = (read_reg & DRAMADDRW_COLBIT_MASK) >>
+		DRAMADDRW_COLBIT_LSB;
+	row = (read_reg & DRAMADDRW_ROWBIT_MASK) >>
+		DRAMADDRW_ROWBIT_LSB;
+	bank = (read_reg & DRAMADDRW_BANKBIT_MASK) >>
+		DRAMADDRW_BANKBIT_LSB;
+	cs = (read_reg & DRAMADDRW_CSBIT_MASK) >>
+		DRAMADDRW_CSBIT_LSB;
+
+	/* Correct for ECC as its not addressible */
+	if (width == DRAMIFWIDTH_32B_ECC)
+		width = 32;
+	if (width == DRAMIFWIDTH_16B_ECC)
+		width = 16;
+
+	/* calculate the SDRAM size base on this info */
+	size = 1 << (row + bank + col);
+	size = size * cs * (width / 8);
+	return size;
+}
+
+static int altr_sdram_probe(struct platform_device *pdev)
+{
+	struct edac_mc_layer layers[2];
+	struct mem_ctl_info *mci;
+	struct altr_sdram_mc_data *drvdata;
+	struct regmap *mc_vbase;
+	struct dimm_info *dimm;
+	u32 read_reg, mem_size;
+	int irq;
+	int res = 0;
+
+	/* Validate the SDRAM controller has ECC enabled */
+	/* Grab the register values from the sdr-ctl in device tree */
+	mc_vbase = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
+	if (IS_ERR(mc_vbase)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "regmap for altr,sdr-ctl lookup failed.\n");
+		return -ENODEV;
+	}
+
+	if (regmap_read(mc_vbase, CTLCFG, &read_reg) ||
+	    ((read_reg & CTLCFG_ECC_AUTO_EN) !=	CTLCFG_ECC_AUTO_EN)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
+		return -ENODEV;
+	}
+
+	/* Grab memory size from device tree. */
+	mem_size = altr_sdram_get_total_mem_size(mc_vbase);
+	if (mem_size <= 0) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Unable to calculate memory size\n");
+		return -ENODEV;
+	}
+
+	/* Ensure the SDRAM Interrupt is disabled and cleared */
+	if (regmap_write(mc_vbase, DRAMINTR, DRAMINTR_INTRCLR)) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "Error clearing SDRAM ECC IRQ\n");
+		return -ENODEV;
+	}
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		edac_printk(KERN_ERR, EDAC_MC,
+			    "No irq %d in DT\n", irq);
+		return -ENODEV;
+	}
+
+	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
+	layers[0].size = 1;
+	layers[0].is_virt_csrow = true;
+	layers[1].type = EDAC_MC_LAYER_CHANNEL;
+	layers[1].size = 1;
+	layers[1].is_virt_csrow = false;
+	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
+			    sizeof(struct altr_sdram_mc_data));
+	if (!mci)
+		return -ENOMEM;
+
+	mci->pdev = &pdev->dev;
+	drvdata = mci->pvt_info;
+	drvdata->mc_vbase = mc_vbase;
+	platform_set_drvdata(pdev, mci);
+
+	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
+		res = -ENOMEM;
+		goto free;
+	}
+
+	mci->mtype_cap = MEM_FLAG_DDR3;
+	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
+	mci->edac_cap = EDAC_FLAG_SECDED;
+	mci->mod_name = EDAC_MOD_STR;
+	mci->mod_ver = EDAC_VERSION;
+	mci->ctl_name = dev_name(&pdev->dev);
+	mci->scrub_mode = SCRUB_SW_SRC;
+	mci->dev_name = dev_name(&pdev->dev);
+
+	dimm = *mci->dimms;
+	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
+	dimm->grain = 8;
+	dimm->dtype = DEV_X8;
+	dimm->mtype = MEM_DDR3;
+	dimm->edac_mode = EDAC_SECDED;
+
+	res = edac_mc_add_mc(mci);
+	if (res < 0)
+		goto err;
+
+	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
+			       0, dev_name(&pdev->dev), mci);
+	if (res < 0) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Unable to request irq %d\n", irq);
+		res = -ENODEV;
+		goto err2;
+	}
+
+	if (regmap_write(drvdata->mc_vbase, DRAMINTR,
+			 (DRAMINTR_INTRCLR | DRAMINTR_INTREN))) {
+		edac_mc_printk(mci, KERN_ERR,
+			       "Error enabling SDRAM ECC IRQ\n");
+		res = -ENODEV;
+		goto err2;
+	}
+
+	altr_sdr_mc_create_debugfs_nodes(mci);
+
+	devres_close_group(&pdev->dev, NULL);
+
+	return 0;
+
+err2:
+	edac_mc_del_mc(&pdev->dev);
+err:
+	devres_release_group(&pdev->dev, NULL);
+free:
+	edac_mc_free(mci);
+	edac_printk(KERN_ERR, EDAC_MC,
+		    "EDAC Probe Failed; Error %d\n", res);
+
+	return res;
+}
+
+static int altr_sdram_remove(struct platform_device *pdev)
+{
+	struct mem_ctl_info *mci = platform_get_drvdata(pdev);
+
+	edac_mc_del_mc(&pdev->dev);
+	edac_mc_free(mci);
+	platform_set_drvdata(pdev, NULL);
+
+	return 0;
+}
+
+static const struct of_device_id altr_sdram_ctrl_of_match[] = {
+	{ .compatible = "altr,sdram-edac", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);
+
+static struct platform_driver altr_sdram_edac_driver = {
+	.probe = altr_sdram_probe,
+	.remove = altr_sdram_remove,
+	.driver = {
+		.name = "altr_sdram_edac",
+		.of_match_table = of_match_ptr(altr_sdram_ctrl_of_match),
+	},
+};
+
+module_platform_driver(altr_sdram_edac_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Altera Corporation");
+MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller");
-- 
1.7.9.5

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Dinh Nguyen]

On Mon, 2014-05-05 at 17:52 -0500, Thor Thayer wrote:
> From: Thor Thayer <tthayer@altera.com>
> 
> ---
> v2: Use the SDRAM controller registers to calculate memory size
>     instead of the Device Tree. Update To & Cc list. Add maintainer
>     information.
> 
> v3: EDAC driver cleanup based on comments from Mailing list.
> 
> Signed-off-by: Thor Thayer <tthayer@altera.com>
> ---
>  MAINTAINERS                |    5 +
>  drivers/edac/Kconfig       |    9 +
>  drivers/edac/Makefile      |    2 +
>  drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 427 insertions(+)
>  create mode 100644 drivers/edac/altera_edac.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e67ea24..ecd1277 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1290,6 +1290,11 @@ M:	Dinh Nguyen <dinguyen@altera.com>
>  S:	Maintained
>  F:	drivers/clk/socfpga/
>  
> +ARM/SOCFPGA SDRAM EDAC SUPPORT
> +M:	Thor Thayer <tthayer@altera.com>
> +S:	Maintained
> +F:	drivers/edac/altera_edac.c
> +
>  ARM/STI ARCHITECTURE
>  M:	Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
>  M:	Maxime Coquelin <maxime.coquelin@st.com>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 878f090..4f4d379 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
>  	  Support for error detection and correction on the
>  	  Cavium Octeon family of SOCs.
>  
> +config EDAC_ALTERA_MC
> +	bool "Altera SDRAM Memory Controller EDAC"

Can this be tristate?

Dinh

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Thor Thayer]

On Tue, May 6, 2014 at 10:42 AM, Dinh Nguyen <dinguyen@altera.com> wrote:
> On Mon, 2014-05-05 at 17:52 -0500, Thor Thayer wrote:
>> From: Thor Thayer <tthayer@altera.com>
>>
>> ---
>> v2: Use the SDRAM controller registers to calculate memory size
>>     instead of the Device Tree. Update To & Cc list. Add maintainer
>>     information.
>>
>> v3: EDAC driver cleanup based on comments from Mailing list.
>>
>> Signed-off-by: Thor Thayer <tthayer@altera.com>
>> ---
>>  MAINTAINERS                |    5 +
>>  drivers/edac/Kconfig       |    9 +
>>  drivers/edac/Makefile      |    2 +
>>  drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 427 insertions(+)
>>  create mode 100644 drivers/edac/altera_edac.c
>>
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index e67ea24..ecd1277 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -1290,6 +1290,11 @@ M:     Dinh Nguyen <dinguyen@altera.com>
>>  S:   Maintained
>>  F:   drivers/clk/socfpga/
>>
>> +ARM/SOCFPGA SDRAM EDAC SUPPORT
>> +M:   Thor Thayer <tthayer@altera.com>
>> +S:   Maintained
>> +F:   drivers/edac/altera_edac.c
>> +
>>  ARM/STI ARCHITECTURE
>>  M:   Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
>>  M:   Maxime Coquelin <maxime.coquelin@st.com>
>> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
>> index 878f090..4f4d379 100644
>> --- a/drivers/edac/Kconfig
>> +++ b/drivers/edac/Kconfig
>> @@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
>>         Support for error detection and correction on the
>>         Cavium Octeon family of SOCs.
>>
>> +config EDAC_ALTERA_MC
>> +     bool "Altera SDRAM Memory Controller EDAC"
>
> Can this be tristate?
>
> Dinh
>
Hi Dinh,

We elected to make this a compile time option because it requires a
special preloader to setup the SDRAM for EDAC.

Thor

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Borislav Petkov]

On Mon, May 05, 2014 at 05:52:17PM -0500, tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org wrote:
> From: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>

Missing commit message.

> ---
> v2: Use the SDRAM controller registers to calculate memory size
>     instead of the Device Tree. Update To & Cc list. Add maintainer
>     information.
> 
> v3: EDAC driver cleanup based on comments from Mailing list.
> 
> Signed-off-by: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> ---
>  MAINTAINERS                |    5 +
>  drivers/edac/Kconfig       |    9 +
>  drivers/edac/Makefile      |    2 +
>  drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 427 insertions(+)
>  create mode 100644 drivers/edac/altera_edac.c
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e67ea24..ecd1277 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1290,6 +1290,11 @@ M:	Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>  S:	Maintained
>  F:	drivers/clk/socfpga/
>  
> +ARM/SOCFPGA SDRAM EDAC SUPPORT
> +M:	Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> +S:	Maintained
> +F:	drivers/edac/altera_edac.c
> +
>  ARM/STI ARCHITECTURE
>  M:	Srinivas Kandagatla <srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>  M:	Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 878f090..4f4d379 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
>  	  Support for error detection and correction on the
>  	  Cavium Octeon family of SOCs.
>  
> +config EDAC_ALTERA_MC
> +	bool "Altera SDRAM Memory Controller EDAC"
> +	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
> +	help
> +	  Support for error detection and correction on the
> +	  Altera SDRAM memory controller. Note that the
> +	  preloader must initialize the SDRAM before loading
> +	  the kernel.
> +
>  endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 4154ed6..9741336 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
>  obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
>  obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
>  obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
> +
> +obj-$(CONFIG_EDAC_ALTERA_MC)	        += altera_edac.o
> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
> new file mode 100644
> index 0000000..e8a3de7
> --- /dev/null
> +++ b/drivers/edac/altera_edac.c
> @@ -0,0 +1,411 @@
> +/*
> + *  Copyright Altera Corporation (C) 2014. All rights reserved.
> + *  Copyright 2011-2012 Calxeda, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.

I'm guessing your lawyers want this boilerplate after all?

...

> +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
> +{
> +	struct mem_ctl_info *mci = dev_id;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 status = 0, err_count = 0, err_addr = 0;
> +
> +	/* Error Address is shared by both SBE & DBE */
> +	regmap_read(drvdata->mc_vbase, ERRADDR, &err_addr);
> +
> +	regmap_read(drvdata->mc_vbase, DRAMSTS, &status);
> +
> +	if (status & DRAMSTS_DBEERR) {
> +		regmap_read(drvdata->mc_vbase, DBECOUNT, &err_count);
> +		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, err_count,
> +				     err_addr >> PAGE_SHIFT,
> +				     err_addr & ~PAGE_MASK, 0,
> +				     0, 0, -1, mci->ctl_name, "");

So, are we setting edac_mc_panic_on_ue now or what are we planning to do
for uncorrectable errors?

> +	if (status & DRAMSTS_SBEERR) {
> +		regmap_read(drvdata->mc_vbase, SBECOUNT, &err_count);
> +		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
> +				     err_addr >> PAGE_SHIFT,
> +				     err_addr & ~PAGE_MASK, 0,
> +				     0, 0, -1, mci->ctl_name, "");
> +	}
> +
> +	regmap_write(drvdata->mc_vbase,	DRAMINTR,
> +		     (DRAMINTR_INTRCLR | DRAMINTR_INTREN));
> +
> +	return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
> +					    const char __user *data,
> +					    size_t count, loff_t *ppos)
> +{
> +	struct mem_ctl_info *mci = file->private_data;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 *ptemp;
> +	dma_addr_t dma_handle;
> +	u32 reg, read_reg = 0;
> +
> +	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
> +	if (IS_ERR(ptemp)) {
> +		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "EDAC Inject: Buffer Allocation error\n");
> +		return -ENOMEM;
> +	}
> +
> +	regmap_read(drvdata->mc_vbase, CTLCFG, &read_reg);
> +	read_reg &= ~(CTLCFG_GEN_SB_ERR | CTLCFG_GEN_DB_ERR);
> +
> +	if (count == 3) {
> +		edac_printk(KERN_ALERT, EDAC_MC,
> +			    "EDAC Inject Double bit error\n");
> +		regmap_write(drvdata->mc_vbase, CTLCFG,
> +			     (read_reg | CTLCFG_GEN_DB_ERR));
> +	} else {
> +		edac_printk(KERN_ALERT, EDAC_MC,
> +			    "EDAC Inject Single bit error\n");
> +		regmap_write(drvdata->mc_vbase,	CTLCFG,
> +			     (read_reg | CTLCFG_GEN_SB_ERR));

You can remove the "EDAC " string from those printks above as
edac_printk already adds the prefix.

> +	}
> +
> +	ptemp[0] = 0x5A5A5A5A;
> +	ptemp[1] = 0xA5A5A5A5;
> +	regmap_write(drvdata->mc_vbase,	CTLCFG, read_reg);
> +	/* Ensure it has been written out */
> +	wmb();
> +
> +	reg = ptemp[0];
> +	read_reg = ptemp[1];
> +	/* Force Read */
> +	rmb();

Have you checked whether those reads don't get optimized away by the
compiler? I know, you need them for triggering the error condition.

Also, you should add a comment here to explain why the reads are being
done.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Thor Thayer]

On Thu, May 8, 2014 at 7:05 AM, Borislav Petkov <bp@alien8.de> wrote:
> On Mon, May 05, 2014 at 05:52:17PM -0500, tthayer@altera.com wrote:
>> From: Thor Thayer <tthayer@altera.com>
>
> Missing commit message.

Whoops. I don't know what happened there. I'll fix it.

>
>> ---
>> v2: Use the SDRAM controller registers to calculate memory size
>>     instead of the Device Tree. Update To & Cc list. Add maintainer
>>     information.
>>
>> v3: EDAC driver cleanup based on comments from Mailing list.
>>
>> Signed-off-by: Thor Thayer <tthayer@altera.com>
>> ---
>>  MAINTAINERS                |    5 +
>>  drivers/edac/Kconfig       |    9 +
>>  drivers/edac/Makefile      |    2 +
>>  drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
>>  4 files changed, 427 insertions(+)
>>  create mode 100644 drivers/edac/altera_edac.c
>>

<snip>

>> --- /dev/null
>> +++ b/drivers/edac/altera_edac.c
>> @@ -0,0 +1,411 @@
>> +/*
>> + *  Copyright Altera Corporation (C) 2014. All rights reserved.
>> + *  Copyright 2011-2012 Calxeda, Inc.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms and conditions of the GNU General Public License,
>> + * version 2, as published by the Free Software Foundation.
>> + *
>> + * This program is distributed in the hope it will be useful, but WITHOUT
>> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
>> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
>> + * more details.
>> + *
>> + * This file is subject to the terms and conditions of the GNU General Public
>> + * License.  See the file "COPYING" in the main directory of this archive
>> + * for more details.
>
> I'm guessing your lawyers want this boilerplate after all?
>

Yes. Their reasoning is that they want to retain the rights and
warranty language with the file (just in case the COPYING file
changes).

> ...
>
>> +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
>> +{
>> +     struct mem_ctl_info *mci = dev_id;
>> +     struct altr_sdram_mc_data *drvdata = mci->pvt_info;
>> +     u32 status = 0, err_count = 0, err_addr = 0;
>> +
>> +     /* Error Address is shared by both SBE & DBE */
>> +     regmap_read(drvdata->mc_vbase, ERRADDR, &err_addr);
>> +
>> +     regmap_read(drvdata->mc_vbase, DRAMSTS, &status);
>> +
>> +     if (status & DRAMSTS_DBEERR) {
>> +             regmap_read(drvdata->mc_vbase, DBECOUNT, &err_count);
>> +             edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, err_count,
>> +                                  err_addr >> PAGE_SHIFT,
>> +                                  err_addr & ~PAGE_MASK, 0,
>> +                                  0, 0, -1, mci->ctl_name, "");
>
> So, are we setting edac_mc_panic_on_ue now or what are we planning to do
> for uncorrectable errors?

Yes. I tested using edac_core.edac_mc_panic_on_ue=1 from the command
line and it worked fine. I'll add a comment to clarify. BTW, thanks
for your help on that.

>
>> +     if (status & DRAMSTS_SBEERR) {
>> +             regmap_read(drvdata->mc_vbase, SBECOUNT, &err_count);

<snip>

>> +     if (count == 3) {
>> +             edac_printk(KERN_ALERT, EDAC_MC,
>> +                         "EDAC Inject Double bit error\n");
>> +             regmap_write(drvdata->mc_vbase, CTLCFG,
>> +                          (read_reg | CTLCFG_GEN_DB_ERR));
>> +     } else {
>> +             edac_printk(KERN_ALERT, EDAC_MC,
>> +                         "EDAC Inject Single bit error\n");
>> +             regmap_write(drvdata->mc_vbase, CTLCFG,
>> +                          (read_reg | CTLCFG_GEN_SB_ERR));
>
> You can remove the "EDAC " string from those printks above as
> edac_printk already adds the prefix.

Great. Will do.

>
>> +     }
>> +
>> +     ptemp[0] = 0x5A5A5A5A;
>> +     ptemp[1] = 0xA5A5A5A5;
>> +     regmap_write(drvdata->mc_vbase, CTLCFG, read_reg);
>> +     /* Ensure it has been written out */
>> +     wmb();
>> +
>> +     reg = ptemp[0];
>> +     read_reg = ptemp[1];
>> +     /* Force Read */
>> +     rmb();
>
> Have you checked whether those reads don't get optimized away by the
> compiler? I know, you need them for triggering the error condition.
>
> Also, you should add a comment here to explain why the reads are being
> done.

I considered using "volatile" variables, but decided against it after
I read Documentation/volatile-considered-harmful.txt and my situation
doesn't fit into the exemptions. Is there a better way to handle this?

I'll add the comment.

Thanks for reviewing and your comments.

Thor

>
> --
> Regards/Gruss,
>     Boris.
>
> Sent from a fat crate under my desk. Formatting is fine.
> --

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Borislav Petkov]

On Thu, May 08, 2014 at 03:37:19PM -0500, Thor Thayer wrote:
> Yes. Their reasoning is that they want to retain the rights and
> warranty language with the file (just in case the COPYING file
> changes).

Ok, thanks for checking up on this.

> Yes. I tested using edac_core.edac_mc_panic_on_ue=1 from the command
> line and it worked fine. I'll add a comment to clarify. BTW, thanks
> for your help on that.

Sure, but the question still remains: do you want to panic on
uncorrectable errors by default or want the user to decide? I guess this
is something you can answer for your hardware...

> I considered using "volatile" variables, but decided against it after
> I read Documentation/volatile-considered-harmful.txt and my situation
> doesn't fit into the exemptions. Is there a better way to handle this?

Off the top of my head, I'd first look at compiler asm output to
check what my compiler does with those writes and then take a look at
employing the ACCESS_ONCE macro or something similar where we use the
asm volatile() as an optimization stop for the compiler, among others.

And then I'll look at asm again to make sure it does what it is supposed
to do. Something to that effect, in any case...

HTH.

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Thor Thayer]

On Fri, May 9, 2014 at 8:52 AM, Borislav Petkov <bp-Gina5bIWoIWzQB+pC5nmwQ@public.gmane.org> wrote:
> On Thu, May 08, 2014 at 03:37:19PM -0500, Thor Thayer wrote:
>> Yes. Their reasoning is that they want to retain the rights and
>> warranty language with the file (just in case the COPYING file
>> changes).
>
> Ok, thanks for checking up on this.
>
>> Yes. I tested using edac_core.edac_mc_panic_on_ue=1 from the command
>> line and it worked fine. I'll add a comment to clarify. BTW, thanks
>> for your help on that.
>
> Sure, but the question still remains: do you want to panic on
> uncorrectable errors by default or want the user to decide? I guess this
> is something you can answer for your hardware...

Yes, good point. Our hardware can't recover from Double Bit Errors so
I'll go back to the panic() in that path. I like the flexibility of
the command line parameter though...

>
>> I considered using "volatile" variables, but decided against it after
>> I read Documentation/volatile-considered-harmful.txt and my situation
>> doesn't fit into the exemptions. Is there a better way to handle this?
>
> Off the top of my head, I'd first look at compiler asm output to
> check what my compiler does with those writes and then take a look at
> employing the ACCESS_ONCE macro or something similar where we use the
> asm volatile() as an optimization stop for the compiler, among others.
>
> And then I'll look at asm again to make sure it does what it is supposed
> to do. Something to that effect, in any case...
>
> HTH.

The reads aren't optimized out now but I'd like to protect against
future optimization changes. I implemented ACCESS_ONCE and checked the
resulting asm output - it looks clean. Thanks.

>
> --
> Regards/Gruss,
>     Boris.
>
> Sent from a fat crate under my desk. Formatting is fine.
> --
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Borislav Petkov]

On Fri, May 09, 2014 at 03:31:53PM -0500, Thor Thayer wrote:
> Yes, good point. Our hardware can't recover from Double Bit Errors so
> I'll go back to the panic() in that path. I like the flexibility of
> the command line parameter though...

Like to panic by default when the machine is booted normally but to be
able to turn off the panicking with a module parameter?

If so, then you could probably implement a trivial setter called

edac_mc_set_panic_on_ue() in a separate patch.

Then, you call it at the end of altr_sdram_probe().

If you want to turn it off again, you do

echo "0" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue

Something like that...

-- 
Regards/Gruss,
    Boris.

Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Thor Thayer]

On Fri, May 9, 2014 at 3:52 PM, Borislav Petkov <bp@alien8.de> wrote:
> On Fri, May 09, 2014 at 03:31:53PM -0500, Thor Thayer wrote:
>> Yes, good point. Our hardware can't recover from Double Bit Errors so
>> I'll go back to the panic() in that path. I like the flexibility of
>> the command line parameter though...
>
> Like to panic by default when the machine is booted normally but to be
> able to turn off the panicking with a module parameter?
>
> If so, then you could probably implement a trivial setter called
>
> edac_mc_set_panic_on_ue() in a separate patch.
>
> Then, you call it at the end of altr_sdram_probe().
>
> If you want to turn it off again, you do
>
> echo "0" > /sys/module/edac_core/parameters/edac_mc_panic_on_ue
>
> Something like that...
>
> --
> Regards/Gruss,
>     Boris.
>
> Sent from a fat crate under my desk. Formatting is fine.
> --

Hi Boris. Yes. this would be a nice solution. I'll use the panic for
now in my next revision of the patch - we know a DBE is bad news.
Thanks!

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Dinh Nguyen]

On 5/5/14 5:52 PM, tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org wrote:
> From: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>
> ---
> v2: Use the SDRAM controller registers to calculate memory size
>     instead of the Device Tree. Update To & Cc list. Add maintainer
>     information.
>
> v3: EDAC driver cleanup based on comments from Mailing list.
>
> Signed-off-by: Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> ---
>  MAINTAINERS                |    5 +
>  drivers/edac/Kconfig       |    9 +
>  drivers/edac/Makefile      |    2 +
>  drivers/edac/altera_edac.c |  411 ++++++++++++++++++++++++++++++++++++++++++++
>  4 files changed, 427 insertions(+)
>  create mode 100644 drivers/edac/altera_edac.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index e67ea24..ecd1277 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -1290,6 +1290,11 @@ M:	Dinh Nguyen <dinguyen-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
>  S:	Maintained
>  F:	drivers/clk/socfpga/
>  
> +ARM/SOCFPGA SDRAM EDAC SUPPORT
> +M:	Thor Thayer <tthayer-EIB2kfCEclfQT0dZR+AlfA@public.gmane.org>
> +S:	Maintained
> +F:	drivers/edac/altera_edac.c
> +
>  ARM/STI ARCHITECTURE
>  M:	Srinivas Kandagatla <srinivas.kandagatla-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>  M:	Maxime Coquelin <maxime.coquelin-qxv4g6HH51o@public.gmane.org>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 878f090..4f4d379 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -368,4 +368,13 @@ config EDAC_OCTEON_PCI
>  	  Support for error detection and correction on the
>  	  Cavium Octeon family of SOCs.
>  
> +config EDAC_ALTERA_MC
> +	bool "Altera SDRAM Memory Controller EDAC"
> +	depends on EDAC_MM_EDAC && ARCH_SOCFPGA
> +	help
> +	  Support for error detection and correction on the
> +	  Altera SDRAM memory controller. Note that the
> +	  preloader must initialize the SDRAM before loading
> +	  the kernel.
> +
>  endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 4154ed6..9741336 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC)		+= octeon_edac-pc.o
>  obj-$(CONFIG_EDAC_OCTEON_L2C)		+= octeon_edac-l2c.o
>  obj-$(CONFIG_EDAC_OCTEON_LMC)		+= octeon_edac-lmc.o
>  obj-$(CONFIG_EDAC_OCTEON_PCI)		+= octeon_edac-pci.o
> +
> +obj-$(CONFIG_EDAC_ALTERA_MC)	        += altera_edac.o
> diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
> new file mode 100644
> index 0000000..e8a3de7
> --- /dev/null
> +++ b/drivers/edac/altera_edac.c
> @@ -0,0 +1,411 @@
> +/*
> + *  Copyright Altera Corporation (C) 2014. All rights reserved.
> + *  Copyright 2011-2012 Calxeda, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms and conditions of the GNU General Public License,
> + * version 2, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * This file is subject to the terms and conditions of the GNU General Public
> + * License.  See the file "COPYING" in the main directory of this archive
> + * for more details.
> +
> + *
> + * Adapted from the highbank_mc_edac driver
> + *
> + */
> +#include <linux/types.h>
> +#include <linux/kernel.h>
> +#include <linux/ctype.h>
> +#include <linux/edac.h>
> +#include <linux/interrupt.h>
> +#include <linux/platform_device.h>
> +#include <linux/of_platform.h>
> +#include <linux/uaccess.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/regmap.h>
> +
> +#include "edac_core.h"
> +#include "edac_module.h"
> +
> +#define EDAC_MOD_STR		"altera_edac"
> +#define EDAC_VERSION		"1"
> +
> +/* SDRAM Controller CtrlCfg Register */
> +#define CTLCFG			0x00
> +
> +/* SDRAM Controller CtrlCfg Register Bit Masks */
> +#define CTLCFG_ECC_EN		0x400
> +#define CTLCFG_ECC_CORR_EN	0x800
> +#define CTLCFG_GEN_SB_ERR	0x2000
> +#define CTLCFG_GEN_DB_ERR	0x4000
> +
> +#define CTLCFG_ECC_AUTO_EN	(CTLCFG_ECC_EN | \
> +				 CTLCFG_ECC_CORR_EN)
> +
> +/* SDRAM Controller Address Width Register */
> +#define DRAMADDRW		0x2C
> +
> +/* SDRAM Controller Address Widths Field Register */
> +#define DRAMADDRW_COLBIT_MASK	0x001F
> +#define DRAMADDRW_COLBIT_LSB	0
> +#define DRAMADDRW_ROWBIT_MASK	0x03E0
> +#define DRAMADDRW_ROWBIT_LSB	5
> +#define DRAMADDRW_BANKBIT_MASK	0x1C00
> +#define DRAMADDRW_BANKBIT_LSB	10
> +#define DRAMADDRW_CSBIT_MASK	0xE000
> +#define DRAMADDRW_CSBIT_LSB	13
> +
> +/* SDRAM Controller Interface Data Width Register */
> +#define DRAMIFWIDTH		0x30
> +
> +/* SDRAM Controller Interface Data Width Defines */
> +#define DRAMIFWIDTH_16B_ECC	24
> +#define DRAMIFWIDTH_32B_ECC	40
> +
> +/* SDRAM Controller DRAM Status Register */
> +#define DRAMSTS		0x38
> +
> +/* SDRAM Controller DRAM Status Register Bit Masks */
> +#define DRAMSTS_SBEERR		0x04
> +#define DRAMSTS_DBEERR		0x08
> +#define DRAMSTS_CORR_DROP	0x10
> +
> +/* SDRAM Controller DRAM IRQ Register */
> +#define DRAMINTR		0x3C
> +
> +/* SDRAM Controller DRAM IRQ Register Bit Masks */
> +#define DRAMINTR_INTREN	0x01
> +#define DRAMINTR_SBEMASK	0x02
> +#define DRAMINTR_DBEMASK	0x04
> +#define DRAMINTR_CORRDROPMASK	0x08
> +#define DRAMINTR_INTRCLR	0x10
> +
> +/* SDRAM Controller Single Bit Error Count Register */
> +#define SBECOUNT		0x40
> +
> +/* SDRAM Controller Single Bit Error Count Register Bit Masks */
> +#define SBECOUNT_MASK		0x0F
> +
> +/* SDRAM Controller Double Bit Error Count Register */
> +#define DBECOUNT		0x44
> +
> +/* SDRAM Controller Double Bit Error Count Register Bit Masks */
> +#define DBECOUNT_MASK		0x0F
> +
> +/* SDRAM Controller ECC Error Address Register */
> +#define ERRADDR		0x48
> +
> +/* SDRAM Controller ECC Error Address Register Bit Masks */
> +#define ERRADDR_MASK		0xFFFFFFFF
> +
> +/* SDRAM Controller ECC Autocorrect Drop Count Register */
> +#define DROPCOUNT		0x4C
> +
> +/* SDRAM Controller ECC Autocorrect Drop Count Register Bit Masks */
> +#define DROPCOUNT_MASK		0x0F
> +
> +/* SDRAM Controller ECC AutoCorrect Address Register */
> +#define DROPADDR		0x50
> +
> +/* SDRAM Controller ECC AutoCorrect Error Address Register Bit Masks */
> +#define DROPADDR_MASK		0xFFFFFFFF
> +
> +/* Altera SDRAM Memory Controller data */
> +struct altr_sdram_mc_data {
> +	struct regmap *mc_vbase;
> +};
> +
> +static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
> +{
> +	struct mem_ctl_info *mci = dev_id;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 status = 0, err_count = 0, err_addr = 0;
> +
> +	/* Error Address is shared by both SBE & DBE */
> +	regmap_read(drvdata->mc_vbase, ERRADDR, &err_addr);
> +
> +	regmap_read(drvdata->mc_vbase, DRAMSTS, &status);
> +
> +	if (status & DRAMSTS_DBEERR) {
> +		regmap_read(drvdata->mc_vbase, DBECOUNT, &err_count);
> +		edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, err_count,
> +				     err_addr >> PAGE_SHIFT,
> +				     err_addr & ~PAGE_MASK, 0,
> +				     0, 0, -1, mci->ctl_name, "");
> +	}
> +	if (status & DRAMSTS_SBEERR) {
> +		regmap_read(drvdata->mc_vbase, SBECOUNT, &err_count);
> +		edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
> +				     err_addr >> PAGE_SHIFT,
> +				     err_addr & ~PAGE_MASK, 0,
> +				     0, 0, -1, mci->ctl_name, "");
> +	}
> +
> +	regmap_write(drvdata->mc_vbase,	DRAMINTR,
> +		     (DRAMINTR_INTRCLR | DRAMINTR_INTREN));
> +
> +	return IRQ_HANDLED;
> +}
> +
> +#ifdef CONFIG_EDAC_DEBUG
> +static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
> +					    const char __user *data,
> +					    size_t count, loff_t *ppos)
> +{
> +	struct mem_ctl_info *mci = file->private_data;
> +	struct altr_sdram_mc_data *drvdata = mci->pvt_info;
> +	u32 *ptemp;
> +	dma_addr_t dma_handle;
> +	u32 reg, read_reg = 0;
> +
> +	ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
> +	if (IS_ERR(ptemp)) {
> +		dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "EDAC Inject: Buffer Allocation error\n");
> +		return -ENOMEM;
> +	}
> +
> +	regmap_read(drvdata->mc_vbase, CTLCFG, &read_reg);
> +	read_reg &= ~(CTLCFG_GEN_SB_ERR | CTLCFG_GEN_DB_ERR);
> +
> +	if (count == 3) {
> +		edac_printk(KERN_ALERT, EDAC_MC,
> +			    "EDAC Inject Double bit error\n");
> +		regmap_write(drvdata->mc_vbase, CTLCFG,
> +			     (read_reg | CTLCFG_GEN_DB_ERR));
> +	} else {
> +		edac_printk(KERN_ALERT, EDAC_MC,
> +			    "EDAC Inject Single bit error\n");
> +		regmap_write(drvdata->mc_vbase,	CTLCFG,
> +			     (read_reg | CTLCFG_GEN_SB_ERR));
> +	}
> +
> +	ptemp[0] = 0x5A5A5A5A;
> +	ptemp[1] = 0xA5A5A5A5;
> +	regmap_write(drvdata->mc_vbase,	CTLCFG, read_reg);
> +	/* Ensure it has been written out */
> +	wmb();
> +
> +	reg = ptemp[0];
> +	read_reg = ptemp[1];
> +	/* Force Read */
> +	rmb();
> +
> +	dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);
> +
> +	return count;
> +}
> +
> +static const struct file_operations altr_sdr_mc_debug_inject_fops = {
> +	.open = simple_open,
> +	.write = altr_sdr_mc_err_inject_write,
> +	.llseek = generic_file_llseek,
> +};
> +
> +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
> +{
> +	if (mci->debugfs)
> +		debugfs_create_file("inject_ctrl", S_IWUSR, mci->debugfs, mci,
> +				    &altr_sdr_mc_debug_inject_fops);
> +}
> +#else
> +static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
> +{}
> +#endif
> +
> +/* Get total memory size in bytes */
> +static u32 altr_sdram_get_total_mem_size(struct regmap *mc_vbase)
> +{
> +	u32 size;
> +	u32 read_reg, row, bank, col, cs, width;
> +
> +	if (regmap_read(mc_vbase, DRAMADDRW, &read_reg) < 0)
> +		return 0;
> +
> +	if (regmap_read(mc_vbase, DRAMIFWIDTH, &width) < 0)
> +		return 0;
> +
> +	col = (read_reg & DRAMADDRW_COLBIT_MASK) >>
> +		DRAMADDRW_COLBIT_LSB;
> +	row = (read_reg & DRAMADDRW_ROWBIT_MASK) >>
> +		DRAMADDRW_ROWBIT_LSB;
> +	bank = (read_reg & DRAMADDRW_BANKBIT_MASK) >>
> +		DRAMADDRW_BANKBIT_LSB;
> +	cs = (read_reg & DRAMADDRW_CSBIT_MASK) >>
> +		DRAMADDRW_CSBIT_LSB;
> +
> +	/* Correct for ECC as its not addressible */
> +	if (width == DRAMIFWIDTH_32B_ECC)
> +		width = 32;
> +	if (width == DRAMIFWIDTH_16B_ECC)
> +		width = 16;
> +
> +	/* calculate the SDRAM size base on this info */
> +	size = 1 << (row + bank + col);
> +	size = size * cs * (width / 8);
> +	return size;
> +}
> +
> +static int altr_sdram_probe(struct platform_device *pdev)
> +{
> +	struct edac_mc_layer layers[2];
> +	struct mem_ctl_info *mci;
> +	struct altr_sdram_mc_data *drvdata;
> +	struct regmap *mc_vbase;
> +	struct dimm_info *dimm;
> +	u32 read_reg, mem_size;
> +	int irq;
> +	int res = 0;
> +
> +	/* Validate the SDRAM controller has ECC enabled */
> +	/* Grab the register values from the sdr-ctl in device tree */
> +	mc_vbase = syscon_regmap_lookup_by_compatible("altr,sdr-ctl");
> +	if (IS_ERR(mc_vbase)) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "regmap for altr,sdr-ctl lookup failed.\n");
> +		return -ENODEV;
> +	}
> +
> +	if (regmap_read(mc_vbase, CTLCFG, &read_reg) ||
> +	    ((read_reg & CTLCFG_ECC_AUTO_EN) !=	CTLCFG_ECC_AUTO_EN)) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "No ECC/ECC disabled [0x%08X]\n", read_reg);
> +		return -ENODEV;
> +	}
> +
> +	/* Grab memory size from device tree. */
> +	mem_size = altr_sdram_get_total_mem_size(mc_vbase);
> +	if (mem_size <= 0) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "Unable to calculate memory size\n");
> +		return -ENODEV;
> +	}
> +
> +	/* Ensure the SDRAM Interrupt is disabled and cleared */
> +	if (regmap_write(mc_vbase, DRAMINTR, DRAMINTR_INTRCLR)) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "Error clearing SDRAM ECC IRQ\n");
> +		return -ENODEV;
> +	}
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		edac_printk(KERN_ERR, EDAC_MC,
> +			    "No irq %d in DT\n", irq);
> +		return -ENODEV;
> +	}
> +
> +	layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
> +	layers[0].size = 1;
> +	layers[0].is_virt_csrow = true;
> +	layers[1].type = EDAC_MC_LAYER_CHANNEL;
> +	layers[1].size = 1;
> +	layers[1].is_virt_csrow = false;
> +	mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
> +			    sizeof(struct altr_sdram_mc_data));
> +	if (!mci)
> +		return -ENOMEM;
> +
> +	mci->pdev = &pdev->dev;
> +	drvdata = mci->pvt_info;
> +	drvdata->mc_vbase = mc_vbase;
> +	platform_set_drvdata(pdev, mci);
> +
> +	if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
> +		res = -ENOMEM;
> +		goto free;
> +	}
> +
> +	mci->mtype_cap = MEM_FLAG_DDR3;
> +	mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
> +	mci->edac_cap = EDAC_FLAG_SECDED;
> +	mci->mod_name = EDAC_MOD_STR;
> +	mci->mod_ver = EDAC_VERSION;
> +	mci->ctl_name = dev_name(&pdev->dev);
> +	mci->scrub_mode = SCRUB_SW_SRC;
> +	mci->dev_name = dev_name(&pdev->dev);
> +
> +	dimm = *mci->dimms;
> +	dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
> +	dimm->grain = 8;
> +	dimm->dtype = DEV_X8;
> +	dimm->mtype = MEM_DDR3;
> +	dimm->edac_mode = EDAC_SECDED;
> +
> +	res = edac_mc_add_mc(mci);
> +	if (res < 0)
> +		goto err;
> +
> +	res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
> +			       0, dev_name(&pdev->dev), mci);
> +	if (res < 0) {
> +		edac_mc_printk(mci, KERN_ERR,
> +			       "Unable to request irq %d\n", irq);
> +		res = -ENODEV;
> +		goto err2;
> +	}
> +
> +	if (regmap_write(drvdata->mc_vbase, DRAMINTR,
> +			 (DRAMINTR_INTRCLR | DRAMINTR_INTREN))) {
> +		edac_mc_printk(mci, KERN_ERR,
> +			       "Error enabling SDRAM ECC IRQ\n");
> +		res = -ENODEV;
> +		goto err2;
> +	}
> +
> +	altr_sdr_mc_create_debugfs_nodes(mci);
> +
> +	devres_close_group(&pdev->dev, NULL);
> +
> +	return 0;
> +
> +err2er altr_sdram_edac_driver = {
> +	.probe = altr_sdram_probe,
> +	.remove = altr_sdram_remove,
> +	.driver = {
> +		.name = "altr_sdram_edac",
> +		.of_match_table = of_match_ptr(altr_sdram_ctrl_of_match),
I don't think you need of_match_ptr here for this platform as SOCFPGA is
only a DT platform. All that of_match_ptr() does for a CONFIG_OF platform
is just return the pointer.

Dinh
> +	},
> +};
> +
> +module_platform_driver(altr_sdram_edac_driver);
> +
> +MODULE_LICENSE("GPL v2");
> +MODULE_AUTHOR("Altera Corporation");
> +MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller");

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCHv3 3/3] edac: altera: Add EDAC support for Altera SDRAM

[Thor Thayer]

On Thu, May 8, 2014 at 5:44 PM, Dinh Nguyen <dinh.linux@gmail.com> wrote:
>
> On 5/5/14 5:52 PM, tthayer@altera.com wrote:
>> From: Thor Thayer <tthayer@altera.com>
>>
>> ---
>> v2: Use the SDRAM controller registers to calculate memory size
>>     instead of the Device Tree. Update To & Cc list. Add maintainer
>>     information.

<snip>

>> +
>> +err2er altr_sdram_edac_driver = {
>> +     .probe = altr_sdram_probe,
>> +     .remove = altr_sdram_remove,
>> +     .driver = {
>> +             .name = "altr_sdram_edac",
>> +             .of_match_table = of_match_ptr(altr_sdram_ctrl_of_match),
> I don't think you need of_match_ptr here for this platform as SOCFPGA is
> only a DT platform. All that of_match_ptr() does for a CONFIG_OF platform
> is just return the pointer.
>
> Dinh

Thanks Dinh. I'll remove it in my next submission.

>> +     },
>> +};
>> +
>> +module_platform_driver(altr_sdram_edac_driver);
>> +
>> +MODULE_LICENSE("GPL v2");
>> +MODULE_AUTHOR("Altera Corporation");
>> +MODULE_DESCRIPTION("EDAC Driver for Altera SDRAM Controller");
>