devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
* [PATCH] ARM: shmobile: henninger: add I2C2 DT support
@ 2014-05-09  0:19 Sergei Shtylyov
  2014-05-11  0:09 ` Simon Horman
  0 siblings, 1 reply; 2+ messages in thread
From: Sergei Shtylyov @ 2014-05-09  0:19 UTC (permalink / raw)
  To: horms, linux-sh, devicetree
  Cc: robh+dt, pawel.moll, mark.rutland, ijc+devicetree, galak,
	magnus.damm, linux, linux-arm-kernel

Define the Henninger board dependent part of the I2C2 device node.
Add device nodes for Analog Devices ADV7180 video decoder and Renesas EEPROM
connected to this I2C bus.

Based on the Koelsch I2C2 device tree patch by Wolfram Sang.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>

---
This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon Horman's
'renesas.git' repo plus SDHI0/2, QSPI, and MSIOF0 DT support patches posted
recently.

 arch/arm/boot/dts/r8a7791-henninger.dts |   24 ++++++++++++++++++++++++
 1 file changed, 24 insertions(+)

Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
===================================================================
--- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
+++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
@@ -110,6 +110,11 @@
 		renesas,function = "sdhi2";
 	};
 
+	i2c2_pins: i2c2 {
+		renesas,groups = "i2c2";
+		renesas,function = "i2c2";
+	};
+
 	qspi_pins: spi0 {
 		renesas,groups = "qspi_ctrl", "qspi_data4";
 		renesas,function = "qspi";
@@ -170,6 +175,25 @@
 	status = "okay";
 };
 
+&i2c2 {
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+	clock-frequency = <400000>;
+
+	video@20 {
+		compatible = "adi,adv7180";
+		reg = <0x20>;
+	};
+
+	eeprom@50 {
+		compatible = "24c02";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
 &qspi {
 	pinctrl-0 = <&qspi_pins>;
 	pinctrl-names = "default";

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: [PATCH] ARM: shmobile: henninger: add I2C2 DT support
  2014-05-09  0:19 [PATCH] ARM: shmobile: henninger: add I2C2 DT support Sergei Shtylyov
@ 2014-05-11  0:09 ` Simon Horman
  0 siblings, 0 replies; 2+ messages in thread
From: Simon Horman @ 2014-05-11  0:09 UTC (permalink / raw)
  To: Sergei Shtylyov
  Cc: linux-sh, devicetree, robh+dt, pawel.moll, mark.rutland,
	ijc+devicetree, galak, magnus.damm, linux, linux-arm-kernel

On Fri, May 09, 2014 at 04:19:41AM +0400, Sergei Shtylyov wrote:
> Define the Henninger board dependent part of the I2C2 device node.
> Add device nodes for Analog Devices ADV7180 video decoder and Renesas EEPROM
> connected to this I2C bus.
> 
> Based on the Koelsch I2C2 device tree patch by Wolfram Sang.
> 
> Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
> 
> ---
> This patch is against 'renesas-devel-v3.15-rc3-20140502' tag of Simon Horman's
> 'renesas.git' repo plus SDHI0/2, QSPI, and MSIOF0 DT support patches posted
> recently.
> 
>  arch/arm/boot/dts/r8a7791-henninger.dts |   24 ++++++++++++++++++++++++
>  1 file changed, 24 insertions(+)
> 
> Index: renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> ===================================================================
> --- renesas.orig/arch/arm/boot/dts/r8a7791-henninger.dts
> +++ renesas/arch/arm/boot/dts/r8a7791-henninger.dts
> @@ -110,6 +110,11 @@
>  		renesas,function = "sdhi2";
>  	};
>  
> +	i2c2_pins: i2c2 {
> +		renesas,groups = "i2c2";
> +		renesas,function = "i2c2";
> +	};
> +
>  	qspi_pins: spi0 {
>  		renesas,groups = "qspi_ctrl", "qspi_data4";
>  		renesas,function = "qspi";
> @@ -170,6 +175,25 @@
>  	status = "okay";
>  };
>  
> +&i2c2 {
> +	pinctrl-0 = <&i2c2_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +	clock-frequency = <400000>;
> +
> +	video@20 {
> +		compatible = "adi,adv7180";
> +		reg = <0x20>;
> +	};
> +
> +	eeprom@50 {
> +		compatible = "24c02";

I am holding off until a conclusion is reached on the discussion
elsewhere on the desired compatible string for the eeprom.

> +		reg = <0x50>;
> +		pagesize = <16>;
> +	};
> +};
> +
>  &qspi {
>  	pinctrl-0 = <&qspi_pins>;
>  	pinctrl-names = "default";
> --
> To unsubscribe from this list: send the line "unsubscribe linux-sh" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
> 

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~2014-05-11  0:09 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2014-05-09  0:19 [PATCH] ARM: shmobile: henninger: add I2C2 DT support Sergei Shtylyov
2014-05-11  0:09 ` Simon Horman

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).