devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Maxime Ripard <maxime.ripard@free-electrons.com>
To: Matthias Brugger <matthias.bgg@gmail.com>
Cc: linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	pawel.moll@arm.com, mark.rutland@arm.com,
	ijc+devicetree@hellion.org.uk, galak@codeaurora.org,
	rdunlap@infradead.org, linux@arm.linux.org.uk,
	daniel.lezcano@linaro.org, tglx@linutronix.de,
	thierry.reding@gmail.com, florian.vaussard@epfl.ch,
	jic23@kernel.org, jason@lakedaemon.net, andrew@lunn.ch,
	silvio.fricke@gmail.com, heiko.stuebner@bq.com, olof@lixom.net,
	sebastian.hesselbarth@gmail.com, sboyd@codeaurora.org,
	gregory.clement@free-electrons.com, arnd@arndb.de,
	robherring2@gmail.com, marc.zyngier@arm.com,
	devicetree@vger.kernel.org, linux-doc@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH v2 3/4] arm: add basic support for Mediatek MT6589 boards
Date: Sun, 11 May 2014 06:56:27 +0200	[thread overview]
Message-ID: <20140511045627.GS7047@lukather> (raw)
In-Reply-To: <1399772463-859-4-git-send-email-matthias.bgg@gmail.com>

[-- Attachment #1: Type: text/plain, Size: 8204 bytes --]

Hi,

On Sun, May 11, 2014 at 03:41:02AM +0200, Matthias Brugger wrote:
> This adds a generic devicetree board file and a dtsi for boards
> based on the MT6589 SoCs from Mediatek.
> 
> Apart from the generic parts (gic, clocks) the only component
> currently supported are the timers.
> 
> Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
> ---
>  .../devicetree/bindings/arm/mediatek-mt65xx.txt    |  8 ++
>  .../devicetree/bindings/vendor-prefixes.txt        |  1 +
>  arch/arm/Kconfig                                   |  2 +
>  arch/arm/Makefile                                  |  1 +
>  arch/arm/boot/dts/mt6589.dtsi                      | 93 ++++++++++++++++++++++
>  arch/arm/mach-mediatek/Kconfig                     |  6 ++
>  arch/arm/mach-mediatek/Makefile                    |  1 +
>  arch/arm/mach-mediatek/mediatek.c                  | 38 +++++++++
>  8 files changed, 150 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/arm/mediatek-mt65xx.txt
>  create mode 100644 arch/arm/boot/dts/mt6589.dtsi
>  create mode 100644 arch/arm/mach-mediatek/Kconfig
>  create mode 100644 arch/arm/mach-mediatek/Makefile
>  create mode 100644 arch/arm/mach-mediatek/mediatek.c

This probably should belong into different patches.

Something like:
  - one to document the prefix
  - one to add mach-mediatek
  - one to add the DTSI

> 
> diff --git a/Documentation/devicetree/bindings/arm/mediatek-mt65xx.txt b/Documentation/devicetree/bindings/arm/mediatek-mt65xx.txt
> new file mode 100644
> index 0000000..d6ac71f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/mediatek-mt65xx.txt
> @@ -0,0 +1,8 @@
> +Mediatek MT6589 Platforms Device Tree Bindings
> +
> +Boards with a SoC of the Mediatek MT6589 shall have the following property:
> +
> +Required root node property:
> +
> +compatible: must contain "mediatek,mt6589"
> +
> diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
> index abc3080..73f9e4c 100644
> --- a/Documentation/devicetree/bindings/vendor-prefixes.txt
> +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
> @@ -75,6 +75,7 @@ linux	Linux-specific binding
>  lsi	LSI Corp. (LSI Logic)
>  marvell	Marvell Technology Group Ltd.
>  maxim	Maxim Integrated Products
> +mediatek	MediaTek Inc.
>  microchip	Microchip Technology Inc.
>  mosaixtech	Mosaix Technologies, Inc.
>  moxa	Moxa
> diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
> index db3c541..0fc8acd 100644
> --- a/arch/arm/Kconfig
> +++ b/arch/arm/Kconfig
> @@ -997,6 +997,8 @@ source "arch/arm/mach-mv78xx0/Kconfig"
>  
>  source "arch/arm/mach-imx/Kconfig"
>  
> +source "arch/arm/mach-mediatek/Kconfig"
> +
>  source "arch/arm/mach-mxs/Kconfig"
>  
>  source "arch/arm/mach-netx/Kconfig"
> diff --git a/arch/arm/Makefile b/arch/arm/Makefile
> index 41c1931..8ce9774 100644
> --- a/arch/arm/Makefile
> +++ b/arch/arm/Makefile
> @@ -170,6 +170,7 @@ machine-$(CONFIG_ARCH_MSM)		+= msm
>  machine-$(CONFIG_ARCH_MV78XX0)		+= mv78xx0
>  machine-$(CONFIG_ARCH_MVEBU)		+= mvebu
>  machine-$(CONFIG_ARCH_MXC)		+= imx
> +machine-$(CONFIG_ARCH_MEDIATEK)		+= mediatek
>  machine-$(CONFIG_ARCH_MXS)		+= mxs
>  machine-$(CONFIG_ARCH_NETX)		+= netx
>  machine-$(CONFIG_ARCH_NOMADIK)		+= nomadik
> diff --git a/arch/arm/boot/dts/mt6589.dtsi b/arch/arm/boot/dts/mt6589.dtsi
> new file mode 100644
> index 0000000..2af140d
> --- /dev/null
> +++ b/arch/arm/boot/dts/mt6589.dtsi
> @@ -0,0 +1,93 @@
> +/*
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Matthias Brugger <matthias.bgg@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "skeleton.dtsi"
> +
> +/ {
> +	compatible = "mediatek,mt6589";
> +	interrupt-parent = <&gic>;
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x0>;
> +		};
> +		cpu@1 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x1>;
> +		};
> +		cpu@2 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x2>;
> +		};
> +		cpu@3 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a7";
> +			reg = <0x3>;
> +		};
> +
> +	};
> +
> +	clocks {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges;
> +
> +		dummy13m: dummy13m {
> +			compatible = "fixed-clock";
> +			clock-frequency = <13000000>;
> +			#clock-cells = <0>;
> +		};
> +
> +		dummy32k: dummy32k {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	soc {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "simple-bus";
> +		clock-ranges;
> +		ranges;
> +
> +		gic: interrupt-controller@10212000 {
> +			compatible = "arm,cortex-a9-gic";

cortex-a15-gic would probably be more appropriate?

> +			interrupt-controller;
> +			#interrupt-cells = <3>;
> +			reg = <0x10211000 0x1000>,
> +			      <0x10212000 0x1000>,
> +			      <0x10214000 0x2000>,
> +			      <0x10216000 0x2000>;
> +		};
> +
> +		timer: timer@10008000 {
> +			compatible = "mediatek,mtk6589-timer";
> +			reg = <0x10008000 0x80>;
> +			interrupts = <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>;
> +			clocks = <&dummy13m>, <&dummy32k>;
> +		};

Usually, we try to order the nodes by physical addresses in the DT.

> +	};
> +};
> diff --git a/arch/arm/mach-mediatek/Kconfig b/arch/arm/mach-mediatek/Kconfig
> new file mode 100644
> index 0000000..2c043a2
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/Kconfig
> @@ -0,0 +1,6 @@
> +config ARCH_MEDIATEK
> +	bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
> +	select ARM_GIC
> +	select MTK_TIMER
> +	help
> +	  Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
> diff --git a/arch/arm/mach-mediatek/Makefile b/arch/arm/mach-mediatek/Makefile
> new file mode 100644
> index 0000000..43e619f
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/Makefile
> @@ -0,0 +1 @@
> +obj-$(CONFIG_ARCH_MEDIATEK) += mediatek.o
> diff --git a/arch/arm/mach-mediatek/mediatek.c b/arch/arm/mach-mediatek/mediatek.c
> new file mode 100644
> index 0000000..0487fc7
> --- /dev/null
> +++ b/arch/arm/mach-mediatek/mediatek.c
> @@ -0,0 +1,38 @@
> +/*
> + * Device Tree support for Mediatek SoCs
> + *
> + * Copyright (c) 2014 MundoReader S.L.
> + * Author: Matthias Brugger <matthias.bgg@gmail.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/of_platform.h>
> +#include <linux/irqchip.h>
> +#include <asm/mach/arch.h>
> +#include <asm/mach/map.h>
> +
> +static void __init mediatek_dt_init(void)
> +{
> +	of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
> +}

This is the default, you can remove it.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

  reply	other threads:[~2014-05-11  4:56 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-05-11  1:40 [PATCH v2 0/4] arm: Add basic support for Mediatek Cortex-A7 SoCs Matthias Brugger
2014-05-11  1:41 ` [PATCH v2 1/4] clocksource: Add support for the Mediatek SoCs Matthias Brugger
2014-05-11  4:45   ` Maxime Ripard
     [not found]   ` <1399772463-859-2-git-send-email-matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
2014-05-12  9:37     ` Arnd Bergmann
2014-05-11  1:41 ` [PATCH v2 2/4] dt-bindings: add mtk-timer bindings Matthias Brugger
2014-05-11  4:49   ` Maxime Ripard
2014-05-11  1:41 ` [PATCH v2 3/4] arm: add basic support for Mediatek MT6589 boards Matthias Brugger
2014-05-11  4:56   ` Maxime Ripard [this message]
2014-05-12  9:30   ` Arnd Bergmann
2014-05-11  1:41 ` [PATCH v2 4/4] arm: mediatek: add dts for Aquaris5 mobile phone Matthias Brugger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140511045627.GS7047@lukather \
    --to=maxime.ripard@free-electrons.com \
    --cc=andrew@lunn.ch \
    --cc=arnd@arndb.de \
    --cc=daniel.lezcano@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.vaussard@epfl.ch \
    --cc=galak@codeaurora.org \
    --cc=gregory.clement@free-electrons.com \
    --cc=heiko.stuebner@bq.com \
    --cc=ijc+devicetree@hellion.org.uk \
    --cc=jason@lakedaemon.net \
    --cc=jic23@kernel.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=marc.zyngier@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=matthias.bgg@gmail.com \
    --cc=olof@lixom.net \
    --cc=pawel.moll@arm.com \
    --cc=rdunlap@infradead.org \
    --cc=robh+dt@kernel.org \
    --cc=robherring2@gmail.com \
    --cc=sboyd@codeaurora.org \
    --cc=sebastian.hesselbarth@gmail.com \
    --cc=silvio.fricke@gmail.com \
    --cc=tglx@linutronix.de \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).