[PATCH v7] Add support for the Allwinner A31 DMA Controller

[PATCH v7] Add support for the Allwinner A31 DMA Controller

[Maxime Ripard]

Hi,

This patchset adds support for the DMA controller found in the
Allwinner A31 and A23 SoCs.

This has been tested using the newly introduced SPI driver on an A31
EVK. Support for DMA-driven SPI transfers will be the subject of
another patch serie.

Since this serie has been sent for the first time about 2 monthes ago,
and I never got any comments from the DMA maintainer, yet gathering
some Acked-by, I expect this to be merged quite quickly.

Thanks,
Maxime

Changes from v6:
  - Dropped the merged patches and the clock patches that are pretty
    orthogonal to this driver

Changes from v5:
  - Rebased on top of 3.15-rc1

Changes from v4:
  - Removed the packed attribute on the LLI
  - Switched to using a NULL device pointer in clk_get on PLL6 and
    AHB1 mux to make explicit that we are getting global clocks
  - Switched from spin_lock_irqsave to spin_lock in the interrupt
    handler
  - Various nitpicks from Andy Shevchenko:
    + Switched to using %p printk formats for pointers
    + Inverted some tests to lose a level of indentation
    + Dropped ifdef DEBUG protecting calls to dev_dbg

Changes from v3:
  - A few other comments made by Andy Shevchenko were fixed:
    + Used references in %pa* printk formats
    + Used is_slave_direction in prep_slave_sg to make sure we were
      actually called for something, and to avoid making assumptions
      that we were actually called with the expected directions
    + A few others minor fixes: s/pr_err/dev_err/, etc.

Changes from v2:
  - Removed the clk_put calls in the clock protection functions
  - Splitted out the sunxi machines into several files
  - Moved the clock protection code into these new machine files
  - Moved the PLL6 reparenting to the DMA driver
  - Addressed various comments from Andy Shevchenko: switched to using
    devm_kcalloc, used correct printk formats for physical and DMA
    addresses, etc.

Changes from v1:
  - Removed the clk_put call in the clocks protecting patches
  - Minor fixes here and there as suggested by Andy Shevchenko: switch
    to dmam_pool_create, switch to dev_dbg instead of pr_debug, etc.


Maxime Ripard (1):
  DMA: sun6i: Add driver for the Allwinner A31 DMA controller

 .../devicetree/bindings/dma/sun6i-dma.txt          |  45 +
 drivers/dma/Kconfig                                |   8 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/sun6i-dma.c                            | 987 +++++++++++++++++++++
 4 files changed, 1041 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt
 create mode 100644 drivers/dma/sun6i-dma.c

-- 
1.9.1

[PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Maxime Ripard]

The Allwinner A31 has a 16 channels DMA controller that it shares with the
newer A23. Although sharing some similarities with the DMA controller of the
older Allwinner SoCs, it's significantly different, I don't expect it to be
possible to share the driver for these two.

The A31 Controller is able to memory-to-memory or memory-to-device transfers on
the 16 channels in parallel.

Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
---
 .../devicetree/bindings/dma/sun6i-dma.txt          |  45 +
 drivers/dma/Kconfig                                |   8 +
 drivers/dma/Makefile                               |   1 +
 drivers/dma/sun6i-dma.c                            | 987 +++++++++++++++++++++
 4 files changed, 1041 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/dma/sun6i-dma.txt
 create mode 100644 drivers/dma/sun6i-dma.c

diff --git a/Documentation/devicetree/bindings/dma/sun6i-dma.txt b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
new file mode 100644
index 000000000000..5d7c86d52665
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/sun6i-dma.txt
@@ -0,0 +1,45 @@
+Allwinner A31 DMA Controller
+
+This driver follows the generic DMA bindings defined in dma.txt.
+
+Required properties:
+
+- compatible:	Must be "allwinner,sun6i-a31-dma"
+- reg:		Should contain the registers base address and length
+- interrupts:	Should contain a reference to the interrupt used by this device
+- clocks:	Should contain a reference to the parent AHB clock
+- resets:	Should contain a reference to the reset controller asserting
+	  	this device in reset
+- #dma-cells :	Should be 1, a single cell holding a line request number
+
+Example:
+	dma: dma-controller@01c02000 {
+		compatible = "allwinner,sun6i-a31-dma";
+		reg = <0x01c02000 0x1000>;
+		interrupts = <0 50 4>;
+		clocks = <&ahb1_gates 6>;
+		resets = <&ahb1_rst 6>;
+		#dma-cells = <1>;
+	};
+
+Clients:
+
+DMA clients connected to the A31 DMA controller must use the format
+described in the dma.txt file, using a two-cell specifier for each
+channel: a phandle plus one integer cells.
+The two cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The port ID as specified in the datasheet
+
+Example:
+spi2: spi@01c6a000 {
+	compatible = "allwinner,sun6i-a31-spi";
+	reg = <0x01c6a000 0x1000>;
+	interrupts = <0 67 4>;
+	clocks = <&ahb1_gates 22>, <&spi2_clk>;
+	clock-names = "ahb", "mod";
+	dmas = <&dma 25>, <&dma 25>;
+	dma-names = "rx", "tx";
+	resets = <&ahb1_rst 22>;
+};
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 5c5863842de9..360a10c71388 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -361,6 +361,14 @@ config FSL_EDMA
 	  multiplexing capability for DMA request sources(slot).
 	  This module can be found on Freescale Vybrid and LS-1 SoCs.
 
+config DMA_SUN6I
+	tristate "Allwinner A31 SoCs DMA support"
+	depends on ARCH_SUNXI
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Support for the DMA engine for Allwinner A31 SoCs.
+
 config DMA_ENGINE
 	bool
 
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index 5150c82c9caf..136a86f20c67 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -46,3 +46,4 @@ obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
 obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
 obj-$(CONFIG_QCOM_BAM_DMA) += qcom_bam_dma.o
+obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
diff --git a/drivers/dma/sun6i-dma.c b/drivers/dma/sun6i-dma.c
new file mode 100644
index 000000000000..b9db8594565c
--- /dev/null
+++ b/drivers/dma/sun6i-dma.c
@@ -0,0 +1,987 @@
+/*
+ * Copyright (C) 2013-2014 Allwinner Tech Co., Ltd
+ * Author: Sugar <shuge-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org>
+ *
+ * Copyright (C) 2014 Maxime Ripard
+ * Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dmaengine.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of_dma.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#include "virt-dma.h"
+
+/*
+ * There's 16 physical channels that can work in parallel.
+ *
+ * However we have 30 different endpoints for our requests.
+ *
+ * Since the channels are able to handle only an unidirectional
+ * transfer, we need to allocate more virtual channels so that
+ * everyone can grab one channel.
+ *
+ * Some devices can't work in both direction (mostly because it
+ * wouldn't make sense), so we have a bit fewer virtual channels than
+ * 2 channels per endpoints.
+ */
+
+#define NR_MAX_CHANNELS		16
+#define NR_MAX_REQUESTS		30
+#define NR_MAX_VCHANS		53
+
+/*
+ * Common registers
+ */
+#define DMA_IRQ_EN(x)		((x) * 0x04)
+#define DMA_IRQ_HALF			BIT(0)
+#define DMA_IRQ_PKG			BIT(1)
+#define DMA_IRQ_QUEUE			BIT(2)
+
+#define DMA_IRQ_CHAN_NR			8
+#define DMA_IRQ_CHAN_WIDTH		4
+
+
+#define DMA_IRQ_STAT(x)		((x) * 0x04 + 0x10)
+
+#define DMA_STAT		0x30
+
+/*
+ * Channels specific registers
+ */
+#define DMA_CHAN_ENABLE		0x00
+#define DMA_CHAN_ENABLE_START		BIT(0)
+#define DMA_CHAN_ENABLE_STOP		0
+
+#define DMA_CHAN_PAUSE		0x04
+#define DMA_CHAN_PAUSE_PAUSE		BIT(1)
+#define DMA_CHAN_PAUSE_RESUME		0
+
+#define DMA_CHAN_LLI_ADDR	0x08
+
+#define DMA_CHAN_CUR_CFG	0x0c
+#define DMA_CHAN_CFG_SRC_DRQ(x)		((x) & 0x1f)
+#define DMA_CHAN_CFG_SRC_IO_MODE	BIT(5)
+#define DMA_CHAN_CFG_SRC_LINEAR_MODE	(0 << 5)
+#define DMA_CHAN_CFG_SRC_BURST(x)	(((x) & 0x3) << 7)
+#define DMA_CHAN_CFG_SRC_WIDTH(x)	(((x) & 0x3) << 9)
+
+#define DMA_CHAN_CFG_DST_DRQ(x)		(DMA_CHAN_CFG_SRC_DRQ(x) << 16)
+#define DMA_CHAN_CFG_DST_IO_MODE	(DMA_CHAN_CFG_SRC_IO_MODE << 16)
+#define DMA_CHAN_CFG_DST_LINEAR_MODE	(DMA_CHAN_CFG_SRC_LINEAR_MODE << 16)
+#define DMA_CHAN_CFG_DST_BURST(x)	(DMA_CHAN_CFG_SRC_BURST(x) << 16)
+#define DMA_CHAN_CFG_DST_WIDTH(x)	(DMA_CHAN_CFG_SRC_WIDTH(x) << 16)
+
+#define DMA_CHAN_CUR_SRC	0x10
+
+#define DMA_CHAN_CUR_DST	0x14
+
+#define DMA_CHAN_CUR_CNT	0x18
+
+#define DMA_CHAN_CUR_PARA	0x1c
+
+
+/*
+ * Various hardware related defines
+ */
+#define LLI_LAST_ITEM	0xfffff800
+#define NORMAL_WAIT	8
+#define DRQ_SDRAM	1
+
+/*
+ * Hardware representation of the LLI
+ *
+ * The hardware will be fed the physical address of this structure,
+ * and read its content in order to start the transfer.
+ */
+struct sun6i_dma_lli {
+	u32			cfg;
+	u32			src;
+	u32			dst;
+	u32			len;
+	u32			para;
+	u32			p_lli_next;
+
+	/*
+	 * This field is not used by the DMA controller, but will be
+	 * used by the CPU to go through the list (mostly for dumping
+	 * or freeing it).
+	 */
+	struct sun6i_dma_lli	*v_lli_next;
+};
+
+
+struct sun6i_desc {
+	struct virt_dma_desc	vd;
+	dma_addr_t		p_lli;
+	struct sun6i_dma_lli	*v_lli;
+};
+
+struct sun6i_pchan {
+	u32			idx;
+	void __iomem		*base;
+	struct sun6i_vchan	*vchan;
+	struct sun6i_desc	*desc;
+	struct sun6i_desc	*done;
+};
+
+struct sun6i_vchan {
+	struct virt_dma_chan	vc;
+	struct list_head	node;
+	struct dma_slave_config	cfg;
+	struct sun6i_pchan	*phy;
+	u8			port;
+};
+
+struct sun6i_dma_dev {
+	struct dma_device	slave;
+	void __iomem		*base;
+	struct clk		*clk;
+	struct reset_control	*rstc;
+	spinlock_t		lock;
+	struct tasklet_struct	task;
+	struct list_head	pending;
+	struct dma_pool		*pool;
+	struct sun6i_pchan	*pchans;
+	struct sun6i_vchan	*vchans;
+};
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+
+static inline struct sun6i_dma_dev *to_sun6i_dma_dev(struct dma_device *d)
+{
+	return container_of(d, struct sun6i_dma_dev, slave);
+}
+
+static inline struct sun6i_vchan *to_sun6i_vchan(struct dma_chan *chan)
+{
+	return container_of(chan, struct sun6i_vchan, vc.chan);
+}
+
+static inline struct sun6i_desc *
+to_sun6i_desc(struct dma_async_tx_descriptor *tx)
+{
+	return container_of(tx, struct sun6i_desc, vd.tx);
+}
+
+static inline void sun6i_dma_dump_com_regs(struct sun6i_dma_dev *sdev)
+{
+	dev_dbg(sdev->slave.dev, "Common register:\n"
+		"\tmask0(%04x): 0x%08x\n"
+		"\tmask1(%04x): 0x%08x\n"
+		"\tpend0(%04x): 0x%08x\n"
+		"\tpend1(%04x): 0x%08x\n"
+		"\tstats(%04x): 0x%08x\n",
+		DMA_IRQ_EN(0), readl(sdev->base + DMA_IRQ_EN(0)),
+		DMA_IRQ_EN(1), readl(sdev->base + DMA_IRQ_EN(1)),
+		DMA_IRQ_STAT(0), readl(sdev->base + DMA_IRQ_STAT(0)),
+		DMA_IRQ_STAT(1), readl(sdev->base + DMA_IRQ_STAT(1)),
+		DMA_STAT, readl(sdev->base + DMA_STAT));
+}
+
+static inline void sun6i_dma_dump_chan_regs(struct sun6i_dma_dev *sdev,
+					    struct sun6i_pchan *pchan)
+{
+	phys_addr_t reg = __virt_to_phys((unsigned long)pchan->base);
+
+	dev_dbg(sdev->slave.dev, "Chan %d reg: %pa\n"
+		"\t___en(%04x): \t0x%08x\n"
+		"\tpause(%04x): \t0x%08x\n"
+		"\tstart(%04x): \t0x%08x\n"
+		"\t__cfg(%04x): \t0x%08x\n"
+		"\t__src(%04x): \t0x%08x\n"
+		"\t__dst(%04x): \t0x%08x\n"
+		"\tcount(%04x): \t0x%08x\n"
+		"\t_para(%04x): \t0x%08x\n\n",
+		pchan->idx, &reg,
+		DMA_CHAN_ENABLE,
+		readl(pchan->base + DMA_CHAN_ENABLE),
+		DMA_CHAN_PAUSE,
+		readl(pchan->base + DMA_CHAN_PAUSE),
+		DMA_CHAN_LLI_ADDR,
+		readl(pchan->base + DMA_CHAN_LLI_ADDR),
+		DMA_CHAN_CUR_CFG,
+		readl(pchan->base + DMA_CHAN_CUR_CFG),
+		DMA_CHAN_CUR_SRC,
+		readl(pchan->base + DMA_CHAN_CUR_SRC),
+		DMA_CHAN_CUR_DST,
+		readl(pchan->base + DMA_CHAN_CUR_DST),
+		DMA_CHAN_CUR_CNT,
+		readl(pchan->base + DMA_CHAN_CUR_CNT),
+		DMA_CHAN_CUR_PARA,
+		readl(pchan->base + DMA_CHAN_CUR_PARA));
+}
+
+static inline u8 convert_burst(u8 maxburst)
+{
+	if (maxburst == 1 || maxburst > 16)
+		return 0;
+
+	return fls(maxburst) - 1;
+}
+
+static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
+{
+	switch (addr_width) {
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		return 1;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		return 2;
+	default:
+		return 0;
+	}
+}
+
+static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
+			       struct sun6i_dma_lli *next,
+			       dma_addr_t next_phy,
+			       struct sun6i_desc *txd)
+{
+	if ((!prev && !txd) || !next)
+		return NULL;
+
+	if (!prev) {
+		txd->p_lli = next_phy;
+		txd->v_lli = next;
+	} else {
+		prev->p_lli_next = next_phy;
+		prev->v_lli_next = next;
+	}
+
+	next->p_lli_next = LLI_LAST_ITEM;
+	next->v_lli_next = NULL;
+
+	return next;
+}
+
+static inline void sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
+				     dma_addr_t src,
+				     dma_addr_t dst, u32 len,
+				     struct dma_slave_config *config)
+{
+	u32 src_width, dst_width, src_burst, dst_burst;
+
+	if (!config)
+		return;
+
+	src_burst = convert_burst(config->src_maxburst);
+	dst_burst = convert_burst(config->dst_maxburst);
+
+	src_width = convert_buswidth(config->src_addr_width);
+	dst_width = convert_buswidth(config->dst_addr_width);
+
+	lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
+		DMA_CHAN_CFG_SRC_WIDTH(src_width) |
+		DMA_CHAN_CFG_DST_BURST(dst_burst) |
+		DMA_CHAN_CFG_DST_WIDTH(dst_width);
+
+	lli->src = src;
+	lli->dst = dst;
+	lli->len = len;
+	lli->para = NORMAL_WAIT;
+}
+
+static inline void sun6i_dma_dump_lli(struct sun6i_vchan *vchan,
+				      struct sun6i_dma_lli *lli)
+{
+	phys_addr_t p_lli = __virt_to_phys((unsigned long)lli);
+
+	dev_dbg(chan2dev(&vchan->vc.chan),
+		"\n\tdesc:   p - %pa v - 0x%p\n"
+		"\t\tc - 0x%08x s - 0x%08x d - 0x%08x\n"
+		"\t\tl - 0x%08x p - 0x%08x n - 0x%08x\n",
+		&p_lli, lli,
+		lli->cfg, lli->src, lli->dst,
+		lli->len, lli->para, lli->p_lli_next);
+}
+
+static void sun6i_dma_free_desc(struct virt_dma_desc *vd)
+{
+	struct sun6i_desc *txd = to_sun6i_desc(&vd->tx);
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vd->tx.chan->device);
+	struct sun6i_dma_lli *v_lli, *v_next;
+	dma_addr_t p_lli, p_next;
+
+	if (unlikely(!txd))
+		return;
+
+	p_lli = txd->p_lli;
+	v_lli = txd->v_lli;
+
+	while (v_lli) {
+		v_next = v_lli->v_lli_next;
+		p_next = v_lli->p_lli_next;
+
+		dma_pool_free(sdev->pool, v_lli, p_lli);
+
+		v_lli = v_next;
+		p_lli = p_next;
+	}
+
+	kfree(txd);
+}
+
+static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
+	struct sun6i_pchan *pchan = vchan->phy;
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock(&sdev->lock);
+	list_del_init(&vchan->node);
+	spin_unlock(&sdev->lock);
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+
+	vchan_get_all_descriptors(&vchan->vc, &head);
+
+	if (pchan) {
+		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
+		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
+
+		vchan->phy = NULL;
+		pchan->vchan = NULL;
+		pchan->desc = NULL;
+		pchan->done = NULL;
+	}
+
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+	vchan_dma_desc_free_list(&vchan->vc, &head);
+
+	return 0;
+}
+
+static int sun6i_dma_start_desc(struct sun6i_vchan *vchan)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
+	struct virt_dma_desc *desc = vchan_next_desc(&vchan->vc);
+	struct sun6i_pchan *pchan = vchan->phy;
+	u32 irq_val, irq_reg, irq_offset;
+
+	if (!pchan)
+		return -EAGAIN;
+
+	if (!desc) {
+		pchan->desc = NULL;
+		pchan->done = NULL;
+		return -EAGAIN;
+	}
+
+	list_del(&desc->node);
+
+	pchan->desc = to_sun6i_desc(&desc->tx);
+	pchan->done = NULL;
+
+	sun6i_dma_dump_lli(vchan, pchan->desc->v_lli);
+
+	irq_reg = pchan->idx / DMA_IRQ_CHAN_NR;
+	irq_offset = pchan->idx % DMA_IRQ_CHAN_NR;
+
+	irq_val = readl(sdev->base + DMA_IRQ_EN(irq_offset));
+	irq_val |= DMA_IRQ_QUEUE << (irq_offset * DMA_IRQ_CHAN_WIDTH);
+	writel(irq_val, sdev->base + DMA_IRQ_EN(irq_offset));
+
+	writel(pchan->desc->p_lli, pchan->base + DMA_CHAN_LLI_ADDR);
+	writel(DMA_CHAN_ENABLE_START, pchan->base + DMA_CHAN_ENABLE);
+
+	sun6i_dma_dump_com_regs(sdev);
+	sun6i_dma_dump_chan_regs(sdev, pchan);
+
+	return 0;
+}
+
+static void sun6i_dma_tasklet(unsigned long data)
+{
+	struct sun6i_dma_dev *sdev = (struct sun6i_dma_dev *)data;
+	struct sun6i_vchan *vchan;
+	struct sun6i_pchan *pchan;
+	unsigned int pchan_alloc = 0;
+	unsigned int pchan_idx;
+
+	list_for_each_entry(vchan, &sdev->slave.channels, vc.chan.device_node) {
+		spin_lock_irq(&vchan->vc.lock);
+
+		pchan = vchan->phy;
+
+		if (pchan && pchan->done) {
+			if (sun6i_dma_start_desc(vchan)) {
+				/*
+				 * No current txd associated with this channel
+				 */
+				dev_dbg(sdev->slave.dev, "pchan %u: free\n",
+					pchan->idx);
+
+				/* Mark this channel free */
+				vchan->phy = NULL;
+				pchan->vchan = NULL;
+			}
+		}
+		spin_unlock_irq(&vchan->vc.lock);
+	}
+
+	spin_lock_irq(&sdev->lock);
+	for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
+		pchan = &sdev->pchans[pchan_idx];
+
+		if (pchan->vchan || list_empty(&sdev->pending))
+			continue;
+
+		vchan = list_first_entry(&sdev->pending,
+					 struct sun6i_vchan, node);
+
+		/* Remove from pending channels */
+		list_del_init(&vchan->node);
+		pchan_alloc |= BIT(pchan_idx);
+
+		/* Mark this channel allocated */
+		pchan->vchan = vchan;
+		vchan->phy = pchan;
+		dev_dbg(sdev->slave.dev, "pchan %u: alloc vchan %p\n",
+			pchan->idx, &vchan->vc);
+	}
+	spin_unlock_irq(&sdev->lock);
+
+	for (pchan_idx = 0; pchan_idx < NR_MAX_CHANNELS; pchan_idx++) {
+		if (!(pchan_alloc & BIT(pchan_idx)))
+			continue;
+
+		pchan = sdev->pchans + pchan_idx;
+		vchan = pchan->vchan;
+		if (vchan) {
+			spin_lock_irq(&vchan->vc.lock);
+			sun6i_dma_start_desc(vchan);
+			spin_unlock_irq(&vchan->vc.lock);
+		}
+	}
+}
+
+static irqreturn_t sun6i_dma_interrupt(int irq, void *dev_id)
+{
+	struct sun6i_dma_dev *sdev = dev_id;
+	struct sun6i_vchan *vchan;
+	struct sun6i_pchan *pchan;
+	int i, j, ret = IRQ_NONE;
+	u32 status;
+
+	for (i = 0; i < 2; i++) {
+		status = readl(sdev->base + DMA_IRQ_STAT(i));
+		if (!status)
+			continue;
+
+		dev_dbg(sdev->slave.dev, "DMA irq status %s: 0x%x\n",
+			i ? "high" : "low", status);
+
+		writel(status, sdev->base + DMA_IRQ_STAT(i));
+
+		for (j = 0; (j < 8) && status; j++) {
+			if (status & DMA_IRQ_QUEUE) {
+				pchan = sdev->pchans + j;
+				vchan = pchan->vchan;
+
+				if (vchan) {
+					spin_lock(&vchan->vc.lock);
+					vchan_cookie_complete(&pchan->desc->vd);
+					pchan->done = pchan->desc;
+					spin_unlock(&vchan->vc.lock);
+				}
+			}
+
+			status = status >> 4;
+		}
+
+		tasklet_schedule(&sdev->task);
+		ret = IRQ_HANDLED;
+	}
+
+	return ret;
+}
+
+static struct dma_async_tx_descriptor *sun6i_dma_prep_dma_memcpy(
+		struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	struct dma_slave_config *sconfig = &vchan->cfg;
+	struct sun6i_dma_lli *v_lli;
+	struct sun6i_desc *txd;
+	dma_addr_t p_lli;
+
+	dev_dbg(chan2dev(chan),
+		"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
+		__func__, vchan->vc.chan.chan_id, &dest, &src, len, flags);
+
+	if (!len)
+		return NULL;
+
+	txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+	if (!txd)
+		return NULL;
+
+	v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+	if (!v_lli) {
+		dev_err(sdev->slave.dev, "Failed to alloc lli memory\n");
+		kfree(txd);
+		return NULL;
+	}
+
+	sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig);
+	v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
+		DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
+		DMA_CHAN_CFG_DST_LINEAR_MODE |
+		DMA_CHAN_CFG_SRC_LINEAR_MODE;
+
+	sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
+
+	sun6i_dma_dump_lli(vchan, v_lli);
+
+	return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *sun6i_dma_prep_slave_sg(
+		struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_transfer_direction dir,
+		unsigned long flags, void *context)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	struct dma_slave_config *sconfig = &vchan->cfg;
+	struct sun6i_dma_lli *v_lli, *prev = NULL;
+	struct sun6i_desc *txd;
+	struct scatterlist *sg;
+	dma_addr_t p_lli;
+	int i;
+
+	if (!sgl)
+		return NULL;
+
+	if (!is_slave_direction(dir)) {
+		dev_err(chan2dev(chan), "Invalid DMA direction\n");
+		return NULL;
+	}
+
+	txd = kzalloc(sizeof(*txd), GFP_NOWAIT);
+	if (!txd)
+		return NULL;
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		v_lli = dma_pool_alloc(sdev->pool, GFP_NOWAIT, &p_lli);
+		if (!v_lli) {
+			kfree(txd);
+			return NULL;
+		}
+
+		if (dir == DMA_MEM_TO_DEV) {
+			sun6i_dma_cfg_lli(v_lli, sg_dma_address(sg),
+					  sconfig->dst_addr, sg_dma_len(sg),
+					  sconfig);
+			v_lli->cfg |= DMA_CHAN_CFG_DST_IO_MODE |
+				DMA_CHAN_CFG_SRC_LINEAR_MODE |
+				DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
+				DMA_CHAN_CFG_DST_DRQ(vchan->port);
+
+			dev_dbg(chan2dev(chan),
+				"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
+				__func__, vchan->vc.chan.chan_id,
+				&sconfig->dst_addr, &sg_dma_address(sg),
+				sg_dma_len(sg), flags);
+
+		} else {
+			sun6i_dma_cfg_lli(v_lli, sconfig->src_addr,
+					  sg_dma_address(sg), sg_dma_len(sg),
+					  sconfig);
+			v_lli->cfg |= DMA_CHAN_CFG_DST_LINEAR_MODE |
+				DMA_CHAN_CFG_SRC_IO_MODE |
+				DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
+				DMA_CHAN_CFG_SRC_DRQ(vchan->port);
+
+			dev_dbg(chan2dev(chan),
+				"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
+				__func__, vchan->vc.chan.chan_id,
+				&sg_dma_address(sg), &sconfig->src_addr,
+				sg_dma_len(sg), flags);
+		}
+
+		prev = sun6i_dma_lli_add(prev, v_lli, p_lli, txd);
+	}
+
+	dev_dbg(chan2dev(chan), "First: %pad\n", &txd->p_lli);
+	for (prev = txd->v_lli; prev; prev = prev->v_lli_next)
+		sun6i_dma_dump_lli(vchan, prev);
+
+	return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
+}
+
+static int sun6i_dma_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd,
+		       unsigned long arg)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	struct sun6i_pchan *pchan = vchan->phy;
+	unsigned long flags;
+	int ret = 0;
+
+	switch (cmd) {
+	case DMA_RESUME:
+		dev_dbg(chan2dev(chan), "vchan %p: resume\n", &vchan->vc);
+
+		spin_lock_irqsave(&vchan->vc.lock, flags);
+
+		if (pchan) {
+			writel(DMA_CHAN_PAUSE_RESUME,
+			       pchan->base + DMA_CHAN_PAUSE);
+		} else if (!list_empty(&vchan->vc.desc_issued)) {
+			spin_lock(&sdev->lock);
+			list_add_tail(&vchan->node, &sdev->pending);
+			spin_unlock(&sdev->lock);
+		}
+
+		spin_unlock_irqrestore(&vchan->vc.lock, flags);
+		break;
+
+	case DMA_PAUSE:
+		dev_dbg(chan2dev(chan), "vchan %p: pause\n", &vchan->vc);
+
+		if (pchan) {
+			writel(DMA_CHAN_PAUSE_PAUSE,
+			       pchan->base + DMA_CHAN_PAUSE);
+		} else {
+			spin_lock(&sdev->lock);
+			list_del_init(&vchan->node);
+			spin_unlock(&sdev->lock);
+		}
+		break;
+
+	case DMA_TERMINATE_ALL:
+		ret = sun6i_dma_terminate_all(vchan);
+		break;
+	case DMA_SLAVE_CONFIG:
+		memcpy(&vchan->cfg, (void *)arg, sizeof(struct dma_slave_config));
+		break;
+	default:
+		ret = -ENXIO;
+		break;
+	}
+	return ret;
+}
+
+static enum dma_status sun6i_dma_tx_status(struct dma_chan *chan,
+					   dma_cookie_t cookie,
+					   struct dma_tx_state *state)
+{
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	struct sun6i_pchan *pchan = vchan->phy;
+	struct sun6i_dma_lli *lli;
+	struct virt_dma_desc *vd;
+	struct sun6i_desc *txd;
+	enum dma_status ret;
+	unsigned long flags;
+	size_t bytes = 0;
+
+	ret = dma_cookie_status(chan, cookie, state);
+	if (ret == DMA_COMPLETE)
+		return ret;
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+
+	vd = vchan_find_desc(&vchan->vc, cookie);
+	txd = to_sun6i_desc(&vd->tx);
+
+	if (vd) {
+		for (lli = txd->v_lli; lli != NULL; lli = lli->v_lli_next)
+			bytes += lli->len;
+	} else if (!pchan || !pchan->desc) {
+		bytes = 0;
+	} else {
+		bytes = readl(pchan->base + DMA_CHAN_CUR_CNT);
+	}
+
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+
+	dma_set_residue(state, bytes);
+
+	return ret;
+}
+
+static void sun6i_dma_issue_pending(struct dma_chan *chan)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&vchan->vc.lock, flags);
+
+	if (vchan_issue_pending(&vchan->vc)) {
+		spin_lock(&sdev->lock);
+
+		if (!vchan->phy && list_empty(&vchan->node)) {
+			list_add_tail(&vchan->node, &sdev->pending);
+			tasklet_schedule(&sdev->task);
+			dev_dbg(chan2dev(chan), "vchan %p: issued\n",
+				&vchan->vc);
+		}
+
+		spin_unlock(&sdev->lock);
+	} else {
+		dev_dbg(chan2dev(chan), "vchan %p: nothing to issue\n",
+			&vchan->vc);
+	}
+
+	spin_unlock_irqrestore(&vchan->vc.lock, flags);
+}
+
+static int sun6i_dma_alloc_chan_resources(struct dma_chan *chan)
+{
+	return 0;
+}
+
+static void sun6i_dma_free_chan_resources(struct dma_chan *chan)
+{
+	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
+	struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&sdev->lock, flags);
+	list_del_init(&vchan->node);
+	spin_unlock_irqrestore(&sdev->lock, flags);
+
+	vchan_free_chan_resources(&vchan->vc);
+}
+
+static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
+{
+	int i;
+
+	for (i = 0; i < NR_MAX_VCHANS; i++) {
+		struct sun6i_vchan *vchan = &sdc->vchans[i];
+
+		list_del(&vchan->vc.chan.device_node);
+		tasklet_kill(&vchan->vc.task);
+	}
+
+	tasklet_kill(&sdc->task);
+}
+
+static struct dma_chan *sun6i_dma_of_xlate(struct of_phandle_args *dma_spec,
+					   struct of_dma *ofdma)
+{
+	struct sun6i_dma_dev *sdev = ofdma->of_dma_data;
+	struct sun6i_vchan *vchan;
+	struct dma_chan *chan;
+	u8 port = dma_spec->args[0];
+
+	if (port > NR_MAX_REQUESTS)
+		return NULL;
+
+	chan = dma_get_any_slave_channel(&sdev->slave);
+	if (!chan)
+		return NULL;
+
+	vchan = to_sun6i_vchan(chan);
+	vchan->port = port;
+
+	return chan;
+}
+
+static int sun6i_dma_probe(struct platform_device *pdev)
+{
+	struct sun6i_dma_dev *sdc;
+	struct resource *res;
+	struct clk *mux, *pll6;
+	int irq;
+	int ret, i;
+
+	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
+	if (!sdc)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	sdc->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(sdc->base))
+		return PTR_ERR(sdc->base);
+
+	irq = platform_get_irq(pdev, 0);
+	ret = devm_request_irq(&pdev->dev, irq, sun6i_dma_interrupt, 0,
+			       dev_name(&pdev->dev), sdc);
+	if (ret) {
+		dev_err(&pdev->dev, "Cannot request IRQ\n");
+		return ret;
+	}
+
+	sdc->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(sdc->clk)) {
+		dev_err(&pdev->dev, "No clock specified\n");
+		return PTR_ERR(sdc->clk);
+	}
+
+	mux = clk_get(NULL, "ahb1_mux");
+	if (IS_ERR(mux)) {
+		dev_err(&pdev->dev, "Couldn't get AHB1 Mux\n");
+		return PTR_ERR(mux);
+	}
+
+	pll6 = clk_get(NULL, "pll6");
+	if (IS_ERR(pll6)) {
+		dev_err(&pdev->dev, "Couldn't get PLL6\n");
+		clk_put(mux);
+		return PTR_ERR(pll6);
+	}
+
+	ret = clk_set_parent(mux, pll6);
+	clk_put(pll6);
+	clk_put(mux);
+
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't reparent AHB1 on PLL6\n");
+		return ret;
+	}
+
+	sdc->rstc = devm_reset_control_get(&pdev->dev, NULL);
+	if (IS_ERR(sdc->rstc)) {
+		dev_err(&pdev->dev, "No reset controller specified\n");
+		return PTR_ERR(sdc->rstc);
+	}
+
+	sdc->pool = dmam_pool_create(dev_name(&pdev->dev), &pdev->dev,
+				     sizeof(struct sun6i_dma_lli), 4, 0);
+	if (!sdc->pool) {
+		dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+		return -ENOMEM;
+	}
+
+	platform_set_drvdata(pdev, sdc);
+	INIT_LIST_HEAD(&sdc->pending);
+	spin_lock_init(&sdc->lock);
+
+	dma_cap_set(DMA_PRIVATE, sdc->slave.cap_mask);
+	dma_cap_set(DMA_MEMCPY, sdc->slave.cap_mask);
+	dma_cap_set(DMA_SLAVE, sdc->slave.cap_mask);
+
+	INIT_LIST_HEAD(&sdc->slave.channels);
+	sdc->slave.device_alloc_chan_resources	= sun6i_dma_alloc_chan_resources;
+	sdc->slave.device_free_chan_resources	= sun6i_dma_free_chan_resources;
+	sdc->slave.device_tx_status		= sun6i_dma_tx_status;
+	sdc->slave.device_issue_pending		= sun6i_dma_issue_pending;
+	sdc->slave.device_prep_slave_sg		= sun6i_dma_prep_slave_sg;
+	sdc->slave.device_prep_dma_memcpy	= sun6i_dma_prep_dma_memcpy;
+	sdc->slave.device_control		= sun6i_dma_control;
+	sdc->slave.chancnt			= NR_MAX_VCHANS;
+
+	sdc->slave.dev = &pdev->dev;
+
+	sdc->pchans = devm_kcalloc(&pdev->dev, NR_MAX_CHANNELS,
+				   sizeof(struct sun6i_pchan), GFP_KERNEL);
+	if (!sdc->pchans)
+		return -ENOMEM;
+
+	sdc->vchans = devm_kcalloc(&pdev->dev, NR_MAX_VCHANS,
+				   sizeof(struct sun6i_vchan), GFP_KERNEL);
+	if (!sdc->vchans)
+		return -ENOMEM;
+
+	tasklet_init(&sdc->task, sun6i_dma_tasklet, (unsigned long)sdc);
+
+	for (i = 0; i < NR_MAX_CHANNELS; i++) {
+		struct sun6i_pchan *pchan = &sdc->pchans[i];
+
+		pchan->idx = i;
+		pchan->base = sdc->base + 0x100 + i * 0x40;
+	}
+
+	for (i = 0; i < NR_MAX_VCHANS; i++) {
+		struct sun6i_vchan *vchan = &sdc->vchans[i];
+
+		INIT_LIST_HEAD(&vchan->node);
+		vchan->vc.desc_free = sun6i_dma_free_desc;
+		vchan_init(&vchan->vc, &sdc->slave);
+	}
+
+	ret = reset_control_deassert(sdc->rstc);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't deassert the device from reset\n");
+		goto err_chan_free;
+	}
+
+	ret = clk_prepare_enable(sdc->clk);
+	if (ret) {
+		dev_err(&pdev->dev, "Couldn't enable the clock\n");
+		goto err_reset_assert;
+	}
+
+	ret = dma_async_device_register(&sdc->slave);
+	if (ret) {
+		dev_warn(&pdev->dev, "Failed to register DMA engine device\n");
+		goto err_clk_disable;
+	}
+
+	ret = of_dma_controller_register(pdev->dev.of_node, sun6i_dma_of_xlate,
+					 sdc);
+	if (ret) {
+		dev_err(&pdev->dev, "of_dma_controller_register failed\n");
+		goto err_dma_unregister;
+	}
+
+	return 0;
+
+err_dma_unregister:
+	dma_async_device_unregister(&sdc->slave);
+err_clk_disable:
+	clk_disable_unprepare(sdc->clk);
+err_reset_assert:
+	reset_control_assert(sdc->rstc);
+err_chan_free:
+	sun6i_dma_free(sdc);
+	return ret;
+}
+
+static int sun6i_dma_remove(struct platform_device *pdev)
+{
+	struct sun6i_dma_dev *sdc = platform_get_drvdata(pdev);
+
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&sdc->slave);
+
+	clk_disable_unprepare(sdc->clk);
+	reset_control_assert(sdc->rstc);
+
+	sun6i_dma_free(sdc);
+
+	return 0;
+}
+
+static struct of_device_id sun6i_dma_match[] = {
+	{ .compatible = "allwinner,sun6i-a31-dma" }
+};
+
+static struct platform_driver sun6i_dma_driver = {
+	.probe		= sun6i_dma_probe,
+	.remove		= sun6i_dma_remove,
+	.driver = {
+		.name		= "sun6i-dma",
+		.of_match_table	= sun6i_dma_match,
+	},
+};
+module_platform_driver(sun6i_dma_driver);
+
+MODULE_DESCRIPTION("Allwinner A31 DMA Controller Driver");
+MODULE_AUTHOR("Sugar <shuge-0TFLnhJekD6UEPyfVivIlAC/G2K4zDHf@public.gmane.org>");
+MODULE_AUTHOR("Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>");
+MODULE_LICENSE("GPL");
-- 
1.9.1

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Vinod Koul]

On Thu, Apr 24, 2014 at 04:22:44PM +0200, Maxime Ripard wrote:
> The Allwinner A31 has a 16 channels DMA controller that it shares with the
> newer A23. Although sharing some similarities with the DMA controller of the
> older Allwinner SoCs, it's significantly different, I don't expect it to be
> possible to share the driver for these two.
> 
> The A31 Controller is able to memory-to-memory or memory-to-device transfers on
> the 16 channels in parallel.

Overall driver looks in good shape, few comments though...

> +This driver follows the generic DMA bindings defined in dma.txt.
> +
> +Required properties:
> +
> +- compatible:	Must be "allwinner,sun6i-a31-dma"
> +- reg:		Should contain the registers base address and length
> +- interrupts:	Should contain a reference to the interrupt used by this device
> +- clocks:	Should contain a reference to the parent AHB clock
> +- resets:	Should contain a reference to the reset controller asserting
> +	  	this device in reset
> +- #dma-cells :	Should be 1, a single cell holding a line request number
> +
> +Example:
> +	dma: dma-controller@01c02000 {
> +		compatible = "allwinner,sun6i-a31-dma";
> +		reg = <0x01c02000 0x1000>;
> +		interrupts = <0 50 4>;
> +		clocks = <&ahb1_gates 6>;
> +		resets = <&ahb1_rst 6>;
> +		#dma-cells = <1>;
> +	};
> +
> +Clients:
> +
> +DMA clients connected to the A31 DMA controller must use the format
> +described in the dma.txt file, using a two-cell specifier for each
> +channel: a phandle plus one integer cells.
> +The two cells in order are:
> +
> +1. A phandle pointing to the DMA controller.
> +2. The port ID as specified in the datasheet
> +
> +Example:
> +spi2: spi@01c6a000 {
> +	compatible = "allwinner,sun6i-a31-spi";
> +	reg = <0x01c6a000 0x1000>;
> +	interrupts = <0 67 4>;
> +	clocks = <&ahb1_gates 22>, <&spi2_clk>;
> +	clock-names = "ahb", "mod";
> +	dmas = <&dma 25>, <&dma 25>;
> +	dma-names = "rx", "tx";
> +	resets = <&ahb1_rst 22>;
> +};
Ideally binding should be a separate patch

> +static inline u8 convert_burst(u8 maxburst)
> +{
> +	if (maxburst == 1 || maxburst > 16)
> +		return 0;
are these valid configurations?

> +
> +	return fls(maxburst) - 1;
> +}
> +
> +static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
> +{
> +	switch (addr_width) {
> +	case DMA_SLAVE_BUSWIDTH_2_BYTES:
> +		return 1;
> +	case DMA_SLAVE_BUSWIDTH_4_BYTES:
> +		return 2;
return (addr_width >> 1); ..??
since DMA_SLAVE_BUSWIDTH_2_BYTES is numeric 2 and DMA_SLAVE_BUSWIDTH_4_BYTES
numeric 4. 
> +	default:
> +		return 0;
error?

> +static inline void sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
> +				     dma_addr_t src,
> +				     dma_addr_t dst, u32 len,
> +				     struct dma_slave_config *config)
> +{
> +	u32 src_width, dst_width, src_burst, dst_burst;
> +
> +	if (!config)
> +		return;
> +
> +	src_burst = convert_burst(config->src_maxburst);
> +	dst_burst = convert_burst(config->dst_maxburst);
> +
> +	src_width = convert_buswidth(config->src_addr_width);
> +	dst_width = convert_buswidth(config->dst_addr_width);
is 0 a valid case then?

> +
> +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> +{
> +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> +	struct sun6i_pchan *pchan = vchan->phy;
> +	unsigned long flags;
> +	LIST_HEAD(head);
> +
> +	spin_lock(&sdev->lock);
> +	list_del_init(&vchan->node);
> +	spin_unlock(&sdev->lock);
> +
> +	spin_lock_irqsave(&vchan->vc.lock, flags);
> +
> +	vchan_get_all_descriptors(&vchan->vc, &head);
> +
> +	if (pchan) {
> +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> +
> +		vchan->phy = NULL;
> +		pchan->vchan = NULL;
> +		pchan->desc = NULL;
> +		pchan->done = NULL;
> +	}
> +
> +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> +
> +	vchan_dma_desc_free_list(&vchan->vc, &head);

shouldn't you kill the tasklet as well here?

> +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
> +{
> +	int i;
> +
> +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> +
> +		list_del(&vchan->vc.chan.device_node);
> +		tasklet_kill(&vchan->vc.task);
> +	}
> +
> +	tasklet_kill(&sdc->task);
This is again not good. see http://lwn.net/Articles/588457/
At this point HW can still generate interrupts or you can have irq running!

> +
> +static int sun6i_dma_probe(struct platform_device *pdev)
> +{
> +	struct sun6i_dma_dev *sdc;
> +	struct resource *res;
> +	struct clk *mux, *pll6;
> +	int irq;
> +	int ret, i;
> +
> +	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
> +	if (!sdc)
> +		return -ENOMEM;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	sdc->base = devm_ioremap_resource(&pdev->dev, res);
> +	if (IS_ERR(sdc->base))
> +		return PTR_ERR(sdc->base);
> +
> +	irq = platform_get_irq(pdev, 0);
> +	ret = devm_request_irq(&pdev->dev, irq, sun6i_dma_interrupt, 0,
> +			       dev_name(&pdev->dev), sdc);
> +	if (ret) {
> +		dev_err(&pdev->dev, "Cannot request IRQ\n");
> +		return ret;
> +	}
this is not good. You have registered for irq, so your irq handlers can be
invoked but you initialization is not complete yet.

-- 
~Vinod
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 6856 bytes --]

Hi Vinod,

On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> On Thu, Apr 24, 2014 at 04:22:44PM +0200, Maxime Ripard wrote:
> > The Allwinner A31 has a 16 channels DMA controller that it shares with the
> > newer A23. Although sharing some similarities with the DMA controller of the
> > older Allwinner SoCs, it's significantly different, I don't expect it to be
> > possible to share the driver for these two.
> > 
> > The A31 Controller is able to memory-to-memory or memory-to-device transfers on
> > the 16 channels in parallel.
> 
> Overall driver looks in good shape, few comments though...
> 
> > +This driver follows the generic DMA bindings defined in dma.txt.
> > +
> > +Required properties:
> > +
> > +- compatible:	Must be "allwinner,sun6i-a31-dma"
> > +- reg:		Should contain the registers base address and length
> > +- interrupts:	Should contain a reference to the interrupt used by this device
> > +- clocks:	Should contain a reference to the parent AHB clock
> > +- resets:	Should contain a reference to the reset controller asserting
> > +	  	this device in reset
> > +- #dma-cells :	Should be 1, a single cell holding a line request number
> > +
> > +Example:
> > +	dma: dma-controller@01c02000 {
> > +		compatible = "allwinner,sun6i-a31-dma";
> > +		reg = <0x01c02000 0x1000>;
> > +		interrupts = <0 50 4>;
> > +		clocks = <&ahb1_gates 6>;
> > +		resets = <&ahb1_rst 6>;
> > +		#dma-cells = <1>;
> > +	};
> > +
> > +Clients:
> > +
> > +DMA clients connected to the A31 DMA controller must use the format
> > +described in the dma.txt file, using a two-cell specifier for each
> > +channel: a phandle plus one integer cells.
> > +The two cells in order are:
> > +
> > +1. A phandle pointing to the DMA controller.
> > +2. The port ID as specified in the datasheet
> > +
> > +Example:
> > +spi2: spi@01c6a000 {
> > +	compatible = "allwinner,sun6i-a31-spi";
> > +	reg = <0x01c6a000 0x1000>;
> > +	interrupts = <0 67 4>;
> > +	clocks = <&ahb1_gates 22>, <&spi2_clk>;
> > +	clock-names = "ahb", "mod";
> > +	dmas = <&dma 25>, <&dma 25>;
> > +	dma-names = "rx", "tx";
> > +	resets = <&ahb1_rst 22>;
> > +};
> Ideally binding should be a separate patch

Ok

> > +static inline u8 convert_burst(u8 maxburst)
> > +{
> > +	if (maxburst == 1 || maxburst > 16)
> > +		return 0;
> are these valid configurations?

The only valid burst values are 1 (0) and 8 (2).

> > +
> > +	return fls(maxburst) - 1;
> > +}
> > +
> > +static inline u8 convert_buswidth(enum dma_slave_buswidth addr_width)
> > +{
> > +	switch (addr_width) {
> > +	case DMA_SLAVE_BUSWIDTH_2_BYTES:
> > +		return 1;
> > +	case DMA_SLAVE_BUSWIDTH_4_BYTES:
> > +		return 2;
> return (addr_width >> 1); ..??
> since DMA_SLAVE_BUSWIDTH_2_BYTES is numeric 2 and DMA_SLAVE_BUSWIDTH_4_BYTES
> numeric 4. 

Yes, it would work.

> > +	default:
> > +		return 0;
> error?

Ok.

> > +static inline void sun6i_dma_cfg_lli(struct sun6i_dma_lli *lli,
> > +				     dma_addr_t src,
> > +				     dma_addr_t dst, u32 len,
> > +				     struct dma_slave_config *config)
> > +{
> > +	u32 src_width, dst_width, src_burst, dst_burst;
> > +
> > +	if (!config)
> > +		return;
> > +
> > +	src_burst = convert_burst(config->src_maxburst);
> > +	dst_burst = convert_burst(config->dst_maxburst);
> > +
> > +	src_width = convert_buswidth(config->src_addr_width);
> > +	dst_width = convert_buswidth(config->dst_addr_width);
> is 0 a valid case then?

Yes, it is. 0 is a burst of 1, and a width of a byte.

> > +
> > +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> > +{
> > +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> > +	struct sun6i_pchan *pchan = vchan->phy;
> > +	unsigned long flags;
> > +	LIST_HEAD(head);
> > +
> > +	spin_lock(&sdev->lock);
> > +	list_del_init(&vchan->node);
> > +	spin_unlock(&sdev->lock);
> > +
> > +	spin_lock_irqsave(&vchan->vc.lock, flags);
> > +
> > +	vchan_get_all_descriptors(&vchan->vc, &head);
> > +
> > +	if (pchan) {
> > +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> > +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> > +
> > +		vchan->phy = NULL;
> > +		pchan->vchan = NULL;
> > +		pchan->desc = NULL;
> > +		pchan->done = NULL;
> > +	}
> > +
> > +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> > +
> > +	vchan_dma_desc_free_list(&vchan->vc, &head);
> 
> shouldn't you kill the tasklet as well here?

Hmm, yes.

> > +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
> > +{
> > +	int i;
> > +
> > +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> > +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> > +
> > +		list_del(&vchan->vc.chan.device_node);
> > +		tasklet_kill(&vchan->vc.task);
> > +	}
> > +
> > +	tasklet_kill(&sdc->task);
> This is again not good. see http://lwn.net/Articles/588457/
> At this point HW can still generate interrupts or you can have irq running!

I'm not sure to fully understand the issue here, but what is not good?
the first or the second tasklet_kill calls, or both?

From what I understood, the issue is only there whenever you are
calling tasklet_disable without making sure that no one will schedule
your tasklet before disabling it.

But the point is I don't actually use either _enable/_disable. I might
be wrong in not using those functions, but I don't really see how I
can be impacted.

> > +static int sun6i_dma_probe(struct platform_device *pdev)
> > +{
> > +	struct sun6i_dma_dev *sdc;
> > +	struct resource *res;
> > +	struct clk *mux, *pll6;
> > +	int irq;
> > +	int ret, i;
> > +
> > +	sdc = devm_kzalloc(&pdev->dev, sizeof(*sdc), GFP_KERNEL);
> > +	if (!sdc)
> > +		return -ENOMEM;
> > +
> > +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > +	sdc->base = devm_ioremap_resource(&pdev->dev, res);
> > +	if (IS_ERR(sdc->base))
> > +		return PTR_ERR(sdc->base);
> > +
> > +	irq = platform_get_irq(pdev, 0);
> > +	ret = devm_request_irq(&pdev->dev, irq, sun6i_dma_interrupt, 0,
> > +			       dev_name(&pdev->dev), sdc);
> > +	if (ret) {
> > +		dev_err(&pdev->dev, "Cannot request IRQ\n");
> > +		return ret;
> > +	}
> this is not good. You have registered for irq, so your irq handlers can be
> invoked but you initialization is not complete yet.

Not really, the device is maintained in reset, we deassert it only
later, and we're only deasserting it from reset later on in the
probe. And since it was kept in reset, you will only get interrupts
whenever you actually enable them, in the tasklet, that is only
scheduled from _issue_pending (and the interrupt handler, which would
not happen)

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 1437 bytes --]

On Wed, Apr 30, 2014 at 02:53:22PM -0700, Maxime Ripard wrote:
> Hi Vinod,
> 
> On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > On Thu, Apr 24, 2014 at 04:22:44PM +0200, Maxime Ripard wrote:
> > > +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
> > > +{
> > > +	int i;
> > > +
> > > +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> > > +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> > > +
> > > +		list_del(&vchan->vc.chan.device_node);
> > > +		tasklet_kill(&vchan->vc.task);
> > > +	}
> > > +
> > > +	tasklet_kill(&sdc->task);
> > This is again not good. see http://lwn.net/Articles/588457/
> > At this point HW can still generate interrupts or you can have irq running!
> 
> I'm not sure to fully understand the issue here, but what is not good?
> the first or the second tasklet_kill calls, or both?
> 
> From what I understood, the issue is only there whenever you are
> calling tasklet_disable without making sure that no one will schedule
> your tasklet before disabling it.
> 
> But the point is I don't actually use either _enable/_disable. I might
> be wrong in not using those functions, but I don't really see how I
> can be impacted.

Well that was one part of it. How do you ensure the tasklet is not scheduled
while and after you are killing it. You need to ensure irq is disabled and pending irqs
have finished processing. I dont see that bit.

-- 
~Vinod


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1775 bytes --]

On Fri, May 02, 2014 at 10:04:29PM +0530, Vinod Koul wrote:
> On Wed, Apr 30, 2014 at 02:53:22PM -0700, Maxime Ripard wrote:
> > Hi Vinod,
> > 
> > On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > > On Thu, Apr 24, 2014 at 04:22:44PM +0200, Maxime Ripard wrote:
> > > > +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
> > > > +{
> > > > +	int i;
> > > > +
> > > > +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> > > > +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> > > > +
> > > > +		list_del(&vchan->vc.chan.device_node);
> > > > +		tasklet_kill(&vchan->vc.task);
> > > > +	}
> > > > +
> > > > +	tasklet_kill(&sdc->task);
> > > This is again not good. see http://lwn.net/Articles/588457/
> > > At this point HW can still generate interrupts or you can have irq running!
> > 
> > I'm not sure to fully understand the issue here, but what is not good?
> > the first or the second tasklet_kill calls, or both?
> > 
> > From what I understood, the issue is only there whenever you are
> > calling tasklet_disable without making sure that no one will schedule
> > your tasklet before disabling it.
> > 
> > But the point is I don't actually use either _enable/_disable. I might
> > be wrong in not using those functions, but I don't really see how I
> > can be impacted.
> 
> Well that was one part of it. How do you ensure the tasklet is not scheduled
> while and after you are killing it. You need to ensure irq is disabled and pending irqs
> have finished processing. I dont see that bit.

Ok. I'll change that.

Do you want me to use tasklet_enable and tasklet_disable as well?

Thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 1216 bytes --]

Hi Vinod,

On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > +
> > +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> > +{
> > +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> > +	struct sun6i_pchan *pchan = vchan->phy;
> > +	unsigned long flags;
> > +	LIST_HEAD(head);
> > +
> > +	spin_lock(&sdev->lock);
> > +	list_del_init(&vchan->node);
> > +	spin_unlock(&sdev->lock);
> > +
> > +	spin_lock_irqsave(&vchan->vc.lock, flags);
> > +
> > +	vchan_get_all_descriptors(&vchan->vc, &head);
> > +
> > +	if (pchan) {
> > +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> > +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> > +
> > +		vchan->phy = NULL;
> > +		pchan->vchan = NULL;
> > +		pchan->desc = NULL;
> > +		pchan->done = NULL;
> > +	}
> > +
> > +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> > +
> > +	vchan_dma_desc_free_list(&vchan->vc, &head);
> 
> shouldn't you kill the tasklet as well here?

Just to be clear, which tasklet? vchan's or the driver's?

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Emilio López]

Hi Maxime,

El 24/04/14 11:22, Maxime Ripard escribió:
> The Allwinner A31 has a 16 channels DMA controller that it shares with the
> newer A23. Although sharing some similarities with the DMA controller of the
> older Allwinner SoCs, it's significantly different, I don't expect it to be
> possible to share the driver for these two.
>
> The A31 Controller is able to memory-to-memory or memory-to-device transfers on
> the 16 channels in parallel.
>
> Signed-off-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
> Acked-by: Arnd Bergmann <arnd-r2nGTMty4D4@public.gmane.org>
> ---
(snip)
> diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> index 5c5863842de9..360a10c71388 100644
> --- a/drivers/dma/Kconfig
> +++ b/drivers/dma/Kconfig
> @@ -361,6 +361,14 @@ config FSL_EDMA
>   	  multiplexing capability for DMA request sources(slot).
>   	  This module can be found on Freescale Vybrid and LS-1 SoCs.
>
> +config DMA_SUN6I
> +	tristate "Allwinner A31 SoCs DMA support"
> +	depends on ARCH_SUNXI
> +	select DMA_ENGINE
> +	select DMA_VIRTUAL_CHANNELS

I think you also need to select DMA_OF here as you are using 
of_dma_controller_register

> +	help
> +	  Support for the DMA engine for Allwinner A31 SoCs.
> +
>   config DMA_ENGINE
>   	bool

Cheers,

Emilio

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Shevchenko, Andriy]

On Tue, 2014-05-20 at 09:40 -0300, Emilio López wrote:
> El 24/04/14 11:22, Maxime Ripard escribió:
> > The Allwinner A31 has a 16 channels DMA controller that it shares with the
> > newer A23. Although sharing some similarities with the DMA controller of the
> > older Allwinner SoCs, it's significantly different, I don't expect it to be
> > possible to share the driver for these two.
> >
> > The A31 Controller is able to memory-to-memory or memory-to-device transfers on
> > the 16 channels in parallel.

...

> > diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
> > index 5c5863842de9..360a10c71388 100644
> > --- a/drivers/dma/Kconfig
> > +++ b/drivers/dma/Kconfig
> > @@ -361,6 +361,14 @@ config FSL_EDMA
> >   	  multiplexing capability for DMA request sources(slot).
> >   	  This module can be found on Freescale Vybrid and LS-1 SoCs.
> >
> > +config DMA_SUN6I
> > +	tristate "Allwinner A31 SoCs DMA support"
> > +	depends on ARCH_SUNXI
> > +	select DMA_ENGINE
> > +	select DMA_VIRTUAL_CHANNELS
> 
> I think you also need to select DMA_OF here as you are using 
> of_dma_controller_register

of_dma_controller_register should have a stub (which it does).
No need to have such a dependency.

-- 
Andy Shevchenko <andriy.shevchenko-ral2JQCrhuEAvxtiuMwx3w@public.gmane.org>
Intel Finland Oy
---------------------------------------------------------------------
Intel Finland Oy
Registered Address: PL 281, 00181 Helsinki 
Business Identity Code: 0357606 - 4 
Domiciled in Helsinki 

This e-mail and any attachments may contain confidential material for
the sole use of the intended recipient(s). Any review or distribution
by others is strictly prohibited. If you are not the intended
recipient, please contact the sender and delete all copies.

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 1842 bytes --]

On Wed, May 07, 2014 at 10:19:49PM -0500, Maxime Ripard wrote:
> On Fri, May 02, 2014 at 10:04:29PM +0530, Vinod Koul wrote:
> > On Wed, Apr 30, 2014 at 02:53:22PM -0700, Maxime Ripard wrote:
> > > Hi Vinod,
> > > 
> > > On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > > > On Thu, Apr 24, 2014 at 04:22:44PM +0200, Maxime Ripard wrote:
> > > > > +static inline void sun6i_dma_free(struct sun6i_dma_dev *sdc)
> > > > > +{
> > > > > +	int i;
> > > > > +
> > > > > +	for (i = 0; i < NR_MAX_VCHANS; i++) {
> > > > > +		struct sun6i_vchan *vchan = &sdc->vchans[i];
> > > > > +
> > > > > +		list_del(&vchan->vc.chan.device_node);
> > > > > +		tasklet_kill(&vchan->vc.task);
> > > > > +	}
> > > > > +
> > > > > +	tasklet_kill(&sdc->task);
> > > > This is again not good. see http://lwn.net/Articles/588457/
> > > > At this point HW can still generate interrupts or you can have irq running!
> > > 
> > > I'm not sure to fully understand the issue here, but what is not good?
> > > the first or the second tasklet_kill calls, or both?
> > > 
> > > From what I understood, the issue is only there whenever you are
> > > calling tasklet_disable without making sure that no one will schedule
> > > your tasklet before disabling it.
> > > 
> > > But the point is I don't actually use either _enable/_disable. I might
> > > be wrong in not using those functions, but I don't really see how I
> > > can be impacted.
> > 
> > Well that was one part of it. How do you ensure the tasklet is not scheduled
> > while and after you are killing it. You need to ensure irq is disabled and pending irqs
> > have finished processing. I dont see that bit.
> 
> Ok. I'll change that.
> 
> Do you want me to use tasklet_enable and tasklet_disable as well?
I dont think it will help in this usage.

-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 1584 bytes --]

On Tue, May 13, 2014 at 03:42:58PM +0200, Maxime Ripard wrote:
> Hi Vinod,
> 
> On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > > +
> > > +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> > > +{
> > > +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> > > +	struct sun6i_pchan *pchan = vchan->phy;
> > > +	unsigned long flags;
> > > +	LIST_HEAD(head);
> > > +
> > > +	spin_lock(&sdev->lock);
> > > +	list_del_init(&vchan->node);
> > > +	spin_unlock(&sdev->lock);
> > > +
> > > +	spin_lock_irqsave(&vchan->vc.lock, flags);
> > > +
> > > +	vchan_get_all_descriptors(&vchan->vc, &head);
> > > +
> > > +	if (pchan) {
> > > +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> > > +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> > > +
> > > +		vchan->phy = NULL;
> > > +		pchan->vchan = NULL;
> > > +		pchan->desc = NULL;
> > > +		pchan->done = NULL;
> > > +	}
> > > +
> > > +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> > > +
> > > +	vchan_dma_desc_free_list(&vchan->vc, &head);
> > 
> > shouldn't you kill the tasklet as well here?
> 
> Just to be clear, which tasklet? vchan's or the driver's?
You need to take care of both. But I suspect if we ensure irq is not triggered
and any pending ones are completed you can simply kill both of the tasklets
happily. See the fixes merged in dmaengine last cycle (hint: patchlog shows what
we need to do)

Btw just noticed, you *should* use dmaengine: as the subsytem name on the patch
series...

-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Maxime Ripard]

[-- Attachment #1: Type: text/plain, Size: 2345 bytes --]

On Wed, May 21, 2014 at 11:01:05AM +0530, Vinod Koul wrote:
> On Tue, May 13, 2014 at 03:42:58PM +0200, Maxime Ripard wrote:
> > Hi Vinod,
> > 
> > On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > > > +
> > > > +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> > > > +{
> > > > +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> > > > +	struct sun6i_pchan *pchan = vchan->phy;
> > > > +	unsigned long flags;
> > > > +	LIST_HEAD(head);
> > > > +
> > > > +	spin_lock(&sdev->lock);
> > > > +	list_del_init(&vchan->node);
> > > > +	spin_unlock(&sdev->lock);
> > > > +
> > > > +	spin_lock_irqsave(&vchan->vc.lock, flags);
> > > > +
> > > > +	vchan_get_all_descriptors(&vchan->vc, &head);
> > > > +
> > > > +	if (pchan) {
> > > > +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> > > > +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> > > > +
> > > > +		vchan->phy = NULL;
> > > > +		pchan->vchan = NULL;
> > > > +		pchan->desc = NULL;
> > > > +		pchan->done = NULL;
> > > > +	}
> > > > +
> > > > +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> > > > +
> > > > +	vchan_dma_desc_free_list(&vchan->vc, &head);
> > > 
> > > shouldn't you kill the tasklet as well here?
> > 
> > Just to be clear, which tasklet? vchan's or the driver's?
> You need to take care of both. But I suspect if we ensure irq is not triggered
> and any pending ones are completed you can simply kill both of the tasklets
> happily. See the fixes merged in dmaengine last cycle (hint: patchlog shows what
> we need to do)

I still don't get why I should kill the driver tasklet in terminate_all.

The tasklet is common to all the channels, if you kill it, you'll
prevent it from scheduling while other channels might have had a need
for it to actually run.

About the commits themselves, I guess you talk about 9068b032 and
ccc7aad0. Both these commits only fix the remove path, not the
terminate_all one, and both these drivers are not doing anything
related to the tasklet in terminate_all.

> Btw just noticed, you *should* use dmaengine: as the subsytem name on the patch
> series...

Ok, I will.

Thanks,
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

Re: [PATCH v7] DMA: sun6i: Add driver for the Allwinner A31 DMA controller

[Vinod Koul]

[-- Attachment #1: Type: text/plain, Size: 2616 bytes --]

On Wed, May 21, 2014 at 10:58:29AM +0200, Maxime Ripard wrote:
> On Wed, May 21, 2014 at 11:01:05AM +0530, Vinod Koul wrote:
> > On Tue, May 13, 2014 at 03:42:58PM +0200, Maxime Ripard wrote:
> > > Hi Vinod,
> > > 
> > > On Wed, Apr 30, 2014 at 12:34:08PM +0530, Vinod Koul wrote:
> > > > > +
> > > > > +static int sun6i_dma_terminate_all(struct sun6i_vchan *vchan)
> > > > > +{
> > > > > +	struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(vchan->vc.chan.device);
> > > > > +	struct sun6i_pchan *pchan = vchan->phy;
> > > > > +	unsigned long flags;
> > > > > +	LIST_HEAD(head);
> > > > > +
> > > > > +	spin_lock(&sdev->lock);
> > > > > +	list_del_init(&vchan->node);
> > > > > +	spin_unlock(&sdev->lock);
> > > > > +
> > > > > +	spin_lock_irqsave(&vchan->vc.lock, flags);
> > > > > +
> > > > > +	vchan_get_all_descriptors(&vchan->vc, &head);
> > > > > +
> > > > > +	if (pchan) {
> > > > > +		writel(DMA_CHAN_ENABLE_STOP, pchan->base + DMA_CHAN_ENABLE);
> > > > > +		writel(DMA_CHAN_PAUSE_RESUME, pchan->base + DMA_CHAN_PAUSE);
> > > > > +
> > > > > +		vchan->phy = NULL;
> > > > > +		pchan->vchan = NULL;
> > > > > +		pchan->desc = NULL;
> > > > > +		pchan->done = NULL;
> > > > > +	}
> > > > > +
> > > > > +	spin_unlock_irqrestore(&vchan->vc.lock, flags);
> > > > > +
> > > > > +	vchan_dma_desc_free_list(&vchan->vc, &head);
> > > > 
> > > > shouldn't you kill the tasklet as well here?
> > > 
> > > Just to be clear, which tasklet? vchan's or the driver's?
> > You need to take care of both. But I suspect if we ensure irq is not triggered
> > and any pending ones are completed you can simply kill both of the tasklets
> > happily. See the fixes merged in dmaengine last cycle (hint: patchlog shows what
> > we need to do)
> 
> I still don't get why I should kill the driver tasklet in terminate_all.
> 
> The tasklet is common to all the channels, if you kill it, you'll
> prevent it from scheduling while other channels might have had a need
> for it to actually run.
I think I was under the impression that your tasklet is per channel, If that is
not the case it makes no sense then for this case
> 
> About the commits themselves, I guess you talk about 9068b032 and
> ccc7aad0. Both these commits only fix the remove path, not the
> terminate_all one, and both these drivers are not doing anything
> related to the tasklet in terminate_all.
Yup as you would have noticed these were not per channel as well

> 
> > Btw just noticed, you *should* use dmaengine: as the subsytem name on the patch
> > series...
> 
> Ok, I will.
Thanks

-- 
~Vinod

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]