Re: [PATCH v2 1/5] clk: bcm281xx: add an initialized flag

[Mike Turquette <mturquette-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

Quoting Alex Elder (2014-05-20 05:52:38)
> Add a flag that tracks whether a clock has already been initialized.
> This will be used by the next patch to avoid initializing a clock
> more than once when it's listed as a prerequisite.
> 
> Signed-off-by: Alex Elder <elder-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>
> ---
>  drivers/clk/bcm/clk-kona.c | 17 +++++++++++++++--
>  drivers/clk/bcm/clk-kona.h |  7 +++++++
>  2 files changed, 22 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/bcm/clk-kona.c b/drivers/clk/bcm/clk-kona.c
> index d603c4e..d8a7f38 100644
> --- a/drivers/clk/bcm/clk-kona.c
> +++ b/drivers/clk/bcm/clk-kona.c
> @@ -27,6 +27,9 @@
>  #define CCU_ACCESS_PASSWORD      0xA5A500
>  #define CLK_GATE_DELAY_LOOP      2000
>  
> +#define clk_is_initialized(_clk)       FLAG_TEST((_clk), KONA, INITIALIZED)
> +#define clk_set_initialized(_clk)      FLAG_SET((_clk), KONA, INITIALIZED)
> +
>  /* Bitfield operations */
>  
>  /* Produces a mask of set bits covering a range of a 32-bit value */
> @@ -1194,13 +1197,23 @@ static bool __peri_clk_init(struct kona_clk *bcm_clk)
>  
>  static bool __kona_clk_init(struct kona_clk *bcm_clk)
>  {
> +       bool ret;
> +
> +       if (clk_is_initialized(bcm_clk))
> +               return true;
> +
>         switch (bcm_clk->type) {
>         case bcm_clk_peri:
> -               return __peri_clk_init(bcm_clk);
> +               ret = __peri_clk_init(bcm_clk);

Hi Alex,

Going through this code, it's a bit hard to keep up ;-)

Does the call to __peri_clk_init enable the prereq clocks? If so, is
their clk->prepare_count and clk->enable_count properly incremented?

Thanks,
Mike

> +               break;
>         default:
> +               ret = false;
>                 BUG();
>         }
> -       return -EINVAL;
> +       if (ret)
> +               clk_set_initialized(bcm_clk);
> +
> +       return ret;
>  }
>  
>  /* Set a CCU and all its clocks into their desired initial state */
> diff --git a/drivers/clk/bcm/clk-kona.h b/drivers/clk/bcm/clk-kona.h
> index 2537b30..10e238d 100644
> --- a/drivers/clk/bcm/clk-kona.h
> +++ b/drivers/clk/bcm/clk-kona.h
> @@ -406,6 +406,7 @@ struct kona_clk {
>         struct clk_init_data init_data; /* includes name of this clock */
>         struct ccu_data *ccu;   /* ccu this clock is associated with */
>         enum bcm_clk_type type;
> +       u32 flags;              /* BCM_CLK_KONA_FLAGS_* below */
>         union {
>                 void *data;
>                 struct peri_clk_data *peri;
> @@ -414,6 +415,12 @@ struct kona_clk {
>  #define to_kona_clk(_hw) \
>         container_of(_hw, struct kona_clk, hw)
>  
> +/*
> + * Kona clock flags:
> + *   INITIALIZED       clock has been initialized already
> + */
> +#define BCM_CLK_KONA_FLAGS_INITIALIZED ((u32)1 << 0)   /* Clock initialized */
> +
>  /* Initialization macro for an entry in a CCU's kona_clks[] array. */
>  #define KONA_CLK(_ccu_name, _clk_name, _type)                          \
>         {                                                               \
> -- 
> 1.9.1
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html