From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lukasz Majewski Subject: Re: [PATCH v5 2/2] Documentation: devicetree: Add boost-frequency binding to list boost mode frequency Date: Fri, 30 May 2014 09:31:49 +0200 Message-ID: <20140530093149.2e41bfb9@amdc2363> References: <1401374319-4480-1-git-send-email-thomas.ab@samsung.com> <1401374319-4480-3-git-send-email-thomas.ab@samsung.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Return-path: In-reply-to: <1401374319-4480-3-git-send-email-thomas.ab@samsung.com> Sender: linux-pm-owner@vger.kernel.org To: Thomas Abraham Cc: linux-pm@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Nishanth Menon , Mark Rutland , kgene.kim@samsung.com, Pawel Moll , Ian Campbell , viresh.kumar@linaro.org, t.figa@samsung.com, rjw@rjwysocki.net, Rob Herring , linux-samsung-soc@vger.kernel.org, Kumar Gala List-Id: devicetree@vger.kernel.org Hi Thomas, > From: Thomas Abraham > > Add a new optional boost-frequency binding for specifying the > frequencies usable in boost mode. > > Cc: Nishanth Menon > Cc: Lukasz Majewski > Cc: Rob Herring > Cc: Pawel Moll > Cc: Mark Rutland > Cc: Ian Campbell > Cc: Kumar Gala > Signed-off-by: Thomas Abraham > Acked-by: Viresh Kumar > --- > .../devicetree/bindings/cpufreq/cpufreq-boost.txt | 38 > ++++++++++++++++++++ 1 file changed, 38 insertions(+) > create mode 100644 > Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > > diff --git > a/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt new > file mode 100644 index 0000000..63ed0fc --- /dev/null > +++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-boost.txt > @@ -0,0 +1,38 @@ > +* Device tree binding for CPU boost frequency (aka over-clocking) > + > +Certain CPU's can be operated in optional 'boost' mode (or sometimes > referred as +overclocking) in which the CPU can operate at > frequencies which are not +specified by the manufacturer as CPU's > operating frequency. + > +Optional Properties: > +- boost-frequencies: list of frequencies in KHz to be used only in > boost mode. > + This list should be a subset of frequencies listed in > "operating-points" > + property. Refer to Documentation/devicetree/bindings/power/opp.txt > for > + details about "operating-points" property. > + > +Example: > + > + cpus { > + #address-cells = <1>; > + #size-cells = <0>; > + cpu@0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + reg = <0>; > + > + operating-points = < > + 1500000 1350000 > + 1400000 1287500 > + 1300000 1250000 > + 1200000 1187500 > + 1100000 1137500 > + 1000000 1087500 > + >; > + boost-frequencies = <1500000 1400000>; > + }; > + cpu@1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a9"; > + reg = <1>; > + }; > + }; Acked-by: Lukasz Majewski -- Best regards, Lukasz Majewski Samsung R&D Institute Poland (SRPOL) | Linux Platform Group