From mboxrd@z Thu Jan 1 00:00:00 1970 From: Simon Horman Subject: Re: [PATCH v2 2/2] arm: shmobile: r8a7790: add USB3.0 node to r8a7790.dtsi Date: Wed, 4 Jun 2014 10:06:47 +0900 Message-ID: <20140604010646.GC25936@verge.net.au> References: <538D7124.60709@renesas.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Content-Disposition: inline In-Reply-To: <538D7124.60709@renesas.com> Sender: linux-sh-owner@vger.kernel.org To: Yoshihiro Shimoda Cc: SH-Linux , Rob Herring , "pawel.moll@arm.com" , "mark.rutland@arm.com" , "ijc+devicetree@hellion.org.uk" , "galak@codeaurora.org" , "devicetree@vger.kernel.org" , Magnus Damm , "linux-arm-kernel@lists.infradead.org" List-Id: devicetree@vger.kernel.org On Tue, Jun 03, 2014 at 03:54:28PM +0900, Yoshihiro Shimoda wrote: > This node depends on a generic phy driver of usb. > > Signed-off-by: Yoshihiro Shimoda I think it would be best if you resubmitted this patch once the driver has been accepted. Likewise for the r8a7791 variant of this patch. > --- > arch/arm/boot/dts/r8a7790.dtsi | 10 ++++++++++ > 1 file changed, 10 insertions(+) > > diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi > index e06c486..985c253 100644 > --- a/arch/arm/boot/dts/r8a7790.dtsi > +++ b/arch/arm/boot/dts/r8a7790.dtsi > @@ -902,4 +902,14 @@ > #size-cells = <0>; > status = "disabled"; > }; > + > + xhci: usb@ee000000 { > + compatible = "renesas,xhci-r8a7790"; > + reg = <0 0xee000000 0 0xc00>; > + interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&mstp3_clks R8A7790_CLK_SSUSB>; > + phys = <&usbphy 1 1>; > + phy-names = "usb"; > + status = "disabled"; > + }; > }; > -- > 1.7.9.5 >