Re: [PATCH v2 11/20] clk: sunxi: Add A23 clocks support

[Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 11223 bytes --]

On Tue, Jun 17, 2014 at 10:52:48PM +0800, Chen-Yu Tsai wrote:
> The clock control unit on the A23 is similar to the one found on the A31.
> 
> The AHB1, APB1, APB2 gates on the A23 are almost identical to the ones
> on the A31, but some outputs are missing.
> 
> The main CPU PLL (PLL1) however is like that on older Allwinner SoCs, such
> as the A10 or A20, but the N factor starts from 1 instead of 0.
> 
> This patch adds support for PLL1 and all the basic clock gates.
> 
> Signed-off-by: Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>

Except for the minor comment below, you have my 

Acked-by: Maxime Ripard <maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

> ---
>  Documentation/devicetree/bindings/clock/sunxi.txt |   5 +
>  drivers/clk/sunxi/clk-sunxi.c                     | 115 ++++++++++++++++++++++
>  2 files changed, 120 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt
> index 7b2ba41..af9e47d 100644
> --- a/Documentation/devicetree/bindings/clock/sunxi.txt
> +++ b/Documentation/devicetree/bindings/clock/sunxi.txt
> @@ -9,11 +9,13 @@ Required properties:
>  	"allwinner,sun4i-a10-osc-clk" - for a gatable oscillator
>  	"allwinner,sun4i-a10-pll1-clk" - for the main PLL clock and PLL4
>  	"allwinner,sun6i-a31-pll1-clk" - for the main PLL clock on A31
> +	"allwinner,sun8i-a23-pll1-clk" - for the main PLL clock on A23
>  	"allwinner,sun4i-a10-pll5-clk" - for the PLL5 clock
>  	"allwinner,sun4i-a10-pll6-clk" - for the PLL6 clock
>  	"allwinner,sun6i-a31-pll6-clk" - for the PLL6 clock on A31
>  	"allwinner,sun4i-a10-cpu-clk" - for the CPU multiplexer clock
>  	"allwinner,sun4i-a10-axi-clk" - for the AXI clock
> +	"allwinner,sun8i-a23-axi-clk" - for the AXI clock on A23
>  	"allwinner,sun4i-a10-axi-gates-clk" - for the AXI gates
>  	"allwinner,sun4i-a10-ahb-clk" - for the AHB clock
>  	"allwinner,sun4i-a10-ahb-gates-clk" - for the AHB gates on A10
> @@ -23,6 +25,7 @@ Required properties:
>  	"allwinner,sun6i-a31-ar100-clk" - for the AR100 on A31
>  	"allwinner,sun6i-a31-ahb1-mux-clk" - for the AHB1 multiplexer on A31
>  	"allwinner,sun6i-a31-ahb1-gates-clk" - for the AHB1 gates on A31
> +	"allwinner,sun8i-a23-ahb1-gates-clk" - for the AHB1 gates on A23
>  	"allwinner,sun4i-a10-apb0-clk" - for the APB0 clock
>  	"allwinner,sun6i-a31-apb0-clk" - for the APB0 clock on A31
>  	"allwinner,sun4i-a10-apb0-gates-clk" - for the APB0 gates on A10
> @@ -37,8 +40,10 @@ Required properties:
>  	"allwinner,sun5i-a10s-apb1-gates-clk" - for the APB1 gates on A10s
>  	"allwinner,sun6i-a31-apb1-gates-clk" - for the APB1 gates on A31
>  	"allwinner,sun7i-a20-apb1-gates-clk" - for the APB1 gates on A20
> +	"allwinner,sun8i-a23-apb1-gates-clk" - for the APB1 gates on A23
>  	"allwinner,sun6i-a31-apb2-div-clk" - for the APB2 gates on A31
>  	"allwinner,sun6i-a31-apb2-gates-clk" - for the APB2 gates on A31
> +	"allwinner,sun8i-a23-apb2-gates-clk" - for the APB2 gates on A23
>  	"allwinner,sun4i-a10-mod0-clk" - for the module 0 family of clocks
>  	"allwinner,sun6i-a31-mbus-clk" - for the MBUS clocks on A31 / A23
>  	"allwinner,sun7i-a20-out-clk" - for the external output clocks
> diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c
> index 7e2f015..f418392 100644
> --- a/drivers/clk/sunxi/clk-sunxi.c
> +++ b/drivers/clk/sunxi/clk-sunxi.c
> @@ -164,6 +164,54 @@ static void sun6i_a31_get_pll1_factors(u32 *freq, u32 parent_rate,
>  }
>  
>  /**
> + * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1
> + * PLL1 rate is calculated as follows
> + * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1);
> + * parent_rate is always 24Mhz
> + */
> +
> +static void sun8i_a23_get_pll1_factors(u32 *freq, u32 parent_rate,
> +				   u8 *n, u8 *k, u8 *m, u8 *p)
> +{
> +	u8 div;
> +
> +	/* Normalize value to a 6M multiple */
> +	div = *freq / 6000000;
> +	*freq = 6000000 * div;
> +
> +	/* we were called to round the frequency, we can now return */
> +	if (n == NULL)
> +		return;
> +
> +	/* m is always zero for pll1 */
> +	*m = 0;
> +
> +	/* k is 1 only on these cases */
> +	if (*freq >= 768000000 || *freq == 42000000 || *freq == 54000000)
> +		*k = 1;
> +	else
> +		*k = 0;
> +
> +	/* p will be 2 for divs under 20 and odd divs under 32 */
> +	if (div < 20 || (div < 32 && (div & 1)))
> +		*p = 2;
> +
> +	/* p will be 1 for even divs under 32, divs under 40 and odd pairs
> +	 * of divs between 40-62 */
> +	else if (div < 40 || (div < 64 && (div & 2)))
> +		*p = 1;
> +
> +	/* any other entries have p = 0 */
> +	else
> +		*p = 0;
> +
> +	/* calculate a suitable n based on k and p */
> +	div <<= *p;
> +	div /= (*k + 1);
> +	*n = div / 4 - 1;
> +}
> +
> +/**
>   * sun4i_get_pll5_factors() - calculates n, k factors for PLL5
>   * PLL5 rate is calculated as follows
>   * rate = parent_rate * n * (k + 1)
> @@ -448,6 +496,18 @@ static struct clk_factors_config sun6i_a31_pll1_config = {
>  	.n_from_one = 1,
>  };
>  
> +static struct clk_factors_config sun8i_a23_pll1_config = {
> +	.nshift = 8,
> +	.nwidth = 5,
> +	.kshift = 4,
> +	.kwidth = 2,
> +	.mshift = 0,
> +	.mwidth = 2,
> +	.pshift = 16,
> +	.pwidth = 2,
> +	.n_from_one = 1,
> +};
> +
>  static struct clk_factors_config sun4i_pll5_config = {
>  	.nshift = 8,
>  	.nwidth = 5,
> @@ -503,6 +563,12 @@ static const struct factors_data sun6i_a31_pll1_data __initconst = {
>  	.getter = sun6i_a31_get_pll1_factors,
>  };
>  
> +static const struct factors_data sun8i_a23_pll1_data __initconst = {
> +	.enable = 31,
> +	.table = &sun8i_a23_pll1_config,
> +	.getter = sun8i_a23_get_pll1_factors,
> +};
> +
>  static const struct factors_data sun7i_a20_pll4_data __initconst = {
>  	.enable = 31,
>  	.table = &sun4i_pll5_config,
> @@ -712,6 +778,25 @@ static const struct div_data sun4i_axi_data __initconst = {
>  	.width	= 2,
>  };
>  
> +static const struct clk_div_table sun8i_a23_axi_table[] __initconst = {
> +	{ .val = 0, .div = 1 },
> +	{ .val = 1, .div = 2 },
> +	{ .val = 2, .div = 3 },
> +	{ .val = 3, .div = 4 },
> +	{ .val = 4, .div = 4 },
> +	{ .val = 5, .div = 4 },
> +	{ .val = 6, .div = 4 },
> +	{ .val = 7, .div = 4 },
> +	{ } /* sentinel */
> +};
> +
> +static const struct div_data sun8i_a23_axi_data __initconst = {
> +	.shift	= 0,
> +	.pow	= 0,
> +	.width	= 8,
> +	.table	= sun8i_a23_axi_table,
> +};
> +
>  static const struct div_data sun4i_ahb_data __initconst = {
>  	.shift	= 4,
>  	.pow	= 1,
> @@ -844,6 +929,10 @@ static const struct gates_data sun7i_a20_ahb_gates_data __initconst = {
>  	.mask = { 0x12f77fff, 0x16ff3f },
>  };
>  
> +static const struct gates_data sun8i_a23_ahb1_gates_data __initconst = {
> +	.mask = {0x25386742, 0x2505111},
> +};
> +
>  static const struct gates_data sun4i_apb0_gates_data __initconst = {
>  	.mask = {0x4EF},
>  };
> @@ -876,6 +965,10 @@ static const struct gates_data sun6i_a31_apb1_gates_data __initconst = {
>  	.mask = {0x3031},
>  };
>  
> +static const struct gates_data sun8i_a23_apb1_gates_data __initconst = {
> +	.mask = {0x3021},
> +};
> +
>  static const struct gates_data sun6i_a31_apb2_gates_data __initconst = {
>  	.mask = {0x3F000F},
>  };
> @@ -884,6 +977,10 @@ static const struct gates_data sun7i_a20_apb1_gates_data __initconst = {
>  	.mask = { 0xff80ff },
>  };
>  
> +static const struct gates_data sun8i_a23_apb2_gates_data __initconst = {
> +	.mask = {0x1F0007},
> +};
> +
>  static const struct gates_data sun4i_a10_usb_gates_data __initconst = {
>  	.mask = {0x1C0},
>  	.reset_mask = 0x07,
> @@ -1139,6 +1236,7 @@ free_clkdata:
>  static const struct of_device_id clk_factors_match[] __initconst = {
>  	{.compatible = "allwinner,sun4i-a10-pll1-clk", .data = &sun4i_pll1_data,},
>  	{.compatible = "allwinner,sun6i-a31-pll1-clk", .data = &sun6i_a31_pll1_data,},
> +	{.compatible = "allwinner,sun8i-a23-pll1-clk", .data = &sun8i_a23_pll1_data,},
>  	{.compatible = "allwinner,sun7i-a20-pll4-clk", .data = &sun7i_a20_pll4_data,},
>  	{.compatible = "allwinner,sun6i-a31-pll6-clk", .data = &sun6i_a31_pll6_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb1-clk", .data = &sun4i_apb1_data,},
> @@ -1151,6 +1249,7 @@ static const struct of_device_id clk_factors_match[] __initconst = {
>  /* Matches for divider clocks */
>  static const struct of_device_id clk_div_match[] __initconst = {
>  	{.compatible = "allwinner,sun4i-a10-axi-clk", .data = &sun4i_axi_data,},
> +	{.compatible = "allwinner,sun8i-a23-axi-clk", .data = &sun8i_a23_axi_data,},
>  	{.compatible = "allwinner,sun4i-a10-ahb-clk", .data = &sun4i_ahb_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb0-clk", .data = &sun4i_apb0_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb2-div-clk", .data = &sun6i_a31_apb2_div_data,},
> @@ -1180,6 +1279,7 @@ static const struct of_device_id clk_gates_match[] __initconst = {
>  	{.compatible = "allwinner,sun5i-a13-ahb-gates-clk", .data = &sun5i_a13_ahb_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-ahb1-gates-clk", .data = &sun6i_a31_ahb1_gates_data,},
>  	{.compatible = "allwinner,sun7i-a20-ahb-gates-clk", .data = &sun7i_a20_ahb_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-ahb1-gates-clk", .data = &sun8i_a23_ahb1_gates_data,},
>  	{.compatible = "allwinner,sun4i-a10-apb0-gates-clk", .data = &sun4i_apb0_gates_data,},
>  	{.compatible = "allwinner,sun5i-a10s-apb0-gates-clk", .data = &sun5i_a10s_apb0_gates_data,},
>  	{.compatible = "allwinner,sun5i-a13-apb0-gates-clk", .data = &sun5i_a13_apb0_gates_data,},
> @@ -1189,7 +1289,9 @@ static const struct of_device_id clk_gates_match[] __initconst = {
>  	{.compatible = "allwinner,sun5i-a13-apb1-gates-clk", .data = &sun5i_a13_apb1_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb1-gates-clk", .data = &sun6i_a31_apb1_gates_data,},
>  	{.compatible = "allwinner,sun7i-a20-apb1-gates-clk", .data = &sun7i_a20_apb1_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-apb1-gates-clk", .data = &sun8i_a23_apb1_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-apb2-gates-clk", .data = &sun6i_a31_apb2_gates_data,},
> +	{.compatible = "allwinner,sun8i-a23-apb2-gates-clk", .data = &sun8i_a23_apb2_gates_data,},
>  	{.compatible = "allwinner,sun4i-a10-usb-clk", .data = &sun4i_a10_usb_gates_data,},
>  	{.compatible = "allwinner,sun5i-a13-usb-clk", .data = &sun5i_a13_usb_gates_data,},
>  	{.compatible = "allwinner,sun6i-a31-usb-clk", .data = &sun6i_a31_usb_gates_data,},
> @@ -1276,3 +1378,16 @@ static void __init sun6i_init_clocks(struct device_node *node)
>  			  ARRAY_SIZE(sun6i_critical_clocks));
>  }
>  CLK_OF_DECLARE(sun6i_a31_clk_init, "allwinner,sun6i-a31", sun6i_init_clocks);
> +
> +static const char *sun8i_critical_clocks[] __initdata = {
> +	"cpu",
> +	"ahb1_sdram",
> +	"mbus",
> +};
> +
> +static void __init sun8i_init_clocks(void)

This has the wrong prototype and will trigger a warning.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]