From mboxrd@z Thu Jan 1 00:00:00 1970 From: Shawn Guo Subject: Re: [PATCH 4/4] ARM: dts: imx6qdl: Enable CODA960 VPU Date: Wed, 18 Jun 2014 23:12:30 +0800 Message-ID: <20140618151229.GR8860@dragon> References: <1402679641-868-1-git-send-email-p.zabel@pengutronix.de> <1402679641-868-4-git-send-email-p.zabel@pengutronix.de> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Return-path: Content-Disposition: inline In-Reply-To: <1402679641-868-4-git-send-email-p.zabel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org> Sender: devicetree-owner-u79uwXL29TY76Z2rM5mHXA@public.gmane.org To: Philipp Zabel Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org, linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org, Rob Herring , Pawel Moll , Mark Rutland , Ian Campbell , Kumar Gala , kernel-bIcnvbaLZ9MEGnE8C9+IrQ@public.gmane.org List-Id: devicetree@vger.kernel.org On Fri, Jun 13, 2014 at 07:14:01PM +0200, Philipp Zabel wrote: > This patch adds links to the on-chip SRAM and reset controller nodes > and switches the interrupts. Make the BIT processor interrupt, which exists on > all variants, the first one. The JPEG unit interrupt, which does not exist on > i.MX27 and i.MX5 thus is an optional second interrupt. > Use different compatible strings for i.MX6Q/D and i.MX6S/DL, as they have to > load separate firmware images for some reason. > > Signed-off-by: Philipp Zabel The whole series looks good to me. Rob, Do you want to apply the first patch through DT tree, or may I have your ACK to take the whole series via IMX tree? Shawn > --- > arch/arm/boot/dts/imx6dl.dtsi | 4 ++++ > arch/arm/boot/dts/imx6q.dtsi | 4 ++++ > arch/arm/boot/dts/imx6qdl.dtsi | 10 ++++++++-- > 3 files changed, 16 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi > index 5c5f574..fbbdfca 100644 > --- a/arch/arm/boot/dts/imx6dl.dtsi > +++ b/arch/arm/boot/dts/imx6dl.dtsi > @@ -110,3 +110,7 @@ > "di0_sel", "di1_sel", > "di0", "di1"; > }; > + > +&vpu { > + compatible = "fsl,imx6dl-vpu", "cnm,coda960"; > +}; > diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi > index addd3f8..2c1dbf8 100644 > --- a/arch/arm/boot/dts/imx6q.dtsi > +++ b/arch/arm/boot/dts/imx6q.dtsi > @@ -291,3 +291,7 @@ > }; > }; > }; > + > +&vpu { > + compatible = "fsl,imx6q-vpu", "cnm,coda960"; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi > index eca0971..2052303 100644 > --- a/arch/arm/boot/dts/imx6qdl.dtsi > +++ b/arch/arm/boot/dts/imx6qdl.dtsi > @@ -315,9 +315,15 @@ > }; > > vpu: vpu@02040000 { > + compatible = "cnm,coda960"; > reg = <0x02040000 0x3c000>; > - interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, > - <0 12 IRQ_TYPE_LEVEL_HIGH>; > + interrupts = <0 12 IRQ_TYPE_LEVEL_HIGH>, > + <0 3 IRQ_TYPE_LEVEL_HIGH>; > + interrupt-names = "bit", "jpeg"; > + clocks = <&clks 168>, <&clks 168>; > + clock-names = "per", "ahb"; > + resets = <&src 1>; > + iram = <&ocram>; > }; > > aipstz@0207c000 { /* AIPSTZ1 */ > -- > 2.0.0 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org More majordomo info at http://vger.kernel.org/majordomo-info.html