devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tejun Heo <tj@kernel.org>
To: Suman Tripathi <stripathi@apm.com>
Cc: olof@lixom.net, arnd@arndb.de, linux-scsi@vger.kernel.org,
	linux-ide@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org, ddutile@redhat.com,
	jcm@redhat.com, patches@apm.com, Loc Ho <lho@apm.com>
Subject: Re: [PATCH v3 2/2] ata: Fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command.
Date: Thu, 19 Jun 2014 10:21:20 -0400	[thread overview]
Message-ID: <20140619142120.GC26904@htj.dyndns.org> (raw)
In-Reply-To: <1403160654-31612-1-git-send-email-stripathi@apm.com>

Two more things.

On Thu, Jun 19, 2014 at 12:20:54PM +0530, Suman Tripathi wrote:
>  /**
> + * xgene_ahci_qc_issue - Issue commands to the device
> + * @qc: Command to issue
> + *
> + * Due to H/W errata, for the IENTIFY DEVICE command
> + * controller is unable to clear the BSY bit after
> + * receiving the PIO setup FIS and results the dma
> + * state machine to go into the CMFatalErrorUpdate
> + * state resulting in the dma state machine lockup.
> + * By restarting the dma engine to move it removes
> + * the controller out of lock up state.

Please re-flow it to 75th or so column.

> + */
> +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
> +{
> +	struct ata_port *ap = qc->ap;
> +	void __iomem *port_mmio = ahci_port_base(ap);
> +	struct ahci_port_priv *pp = ap->private_data;
> +	struct ahci_host_priv *hpriv = ap->host->private_data;
> +	struct xgene_ahci_context *ctx = hpriv->plat_data;
> +
> +	/* Keep track of the currently active link.  It will be used
> +	 * in completion path to determine whether NCQ phase is in
> +	 * progress.
> +	 */
> +	pp->active_link = qc->dev->link;
> +
> +	/*
> +	 * Restart the dma engine if the last cmd issued
> +	 * is IDENTIFY DEVICE command
> +	 */
> +	if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA))
> +		ahci_restart_engine(ap);
> +
> +	if (qc->tf.protocol == ATA_PROT_NCQ)
> +		writel(1 << qc->tag, port_mmio + PORT_SCR_ACT);
> +
> +	if (pp->fbs_enabled && pp->fbs_last_dev != qc->dev->link->pmp) {
> +		u32 fbs = readl(port_mmio + PORT_FBS);
> +		fbs &= ~(PORT_FBS_DEV_MASK | PORT_FBS_DEC);
> +		fbs |= qc->dev->link->pmp << PORT_FBS_DEV_OFFSET;
> +		writel(fbs, port_mmio + PORT_FBS);
> +		pp->fbs_last_dev = qc->dev->link->pmp;
> +	}
> +
> +	writel(1 << qc->tag, port_mmio + PORT_CMD_ISSUE);
> +
> +	/* Save the last command issued */
> +	ctx->last_cmd[ap->port_no] = qc->tf.command;
> +
> +	ahci_sw_activity(qc->dev->link);
> +
> +	return 0;
> +}

Why copy the whole function body?  Can't you do the following?

static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc)
{
	unsigned int ret;

	if (unlikely(last_cmd == IDENTIFY))
		ahci_restart_engine(ap);

	ret = ahci_qc_issue(qc);

	last_cmd = qc->tf.command;

	return ret;
}

Thanks.

-- 
tejun

      parent reply	other threads:[~2014-06-19 14:21 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-06-19  6:50 [PATCH v3 2/2] ata: Fix the dma state machine lockup for the IDENTIFY DEVICE PIO mode command Suman Tripathi
2014-06-19 14:10 ` Tejun Heo
     [not found]   ` <CAOHikRAX1NfeCRWVJtv_FTHHheYxU5uKVk_hytdEmb_j-5_wnA@mail.gmail.com>
2014-06-19 14:21     ` Tejun Heo
     [not found]       ` <CAOHikRAaMaMc1zHU3B_Qqg8fRndCqHQTDR7wpCoaS_kafkgzdw@mail.gmail.com>
2014-06-19 14:33         ` Tejun Heo
2014-06-19 14:21 ` Tejun Heo [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140619142120.GC26904@htj.dyndns.org \
    --to=tj@kernel.org \
    --cc=arnd@arndb.de \
    --cc=ddutile@redhat.com \
    --cc=devicetree@vger.kernel.org \
    --cc=jcm@redhat.com \
    --cc=lho@apm.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-ide@vger.kernel.org \
    --cc=linux-scsi@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=patches@apm.com \
    --cc=stripathi@apm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).