devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
To: Johannes Pointner
	<johannes.pointner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
Cc: Jean Delvare <jdelvare-l3A5Bk7waGM@public.gmane.org>,
	Naveen Krishna Chatradhi
	<ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>,
	lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org,
	linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: Re: PATCH 2/2 v2] Adds support for the ntc thermistor B57330V2103 from  EPCOS
Date: Tue, 1 Jul 2014 06:50:56 -0700	[thread overview]
Message-ID: <20140701135056.GA512@roeck-us.net> (raw)
In-Reply-To: <1714701.bPhuGb1mhL@lenovobook>

On Tue, Jul 01, 2014 at 08:05:52AM +0200, Johannes Pointner wrote:
> This patch adds support for the ntc thermistor B57330V2103 from EPCOS.
> 
> Change since v1:
> 1. Rearranged compatible node values alphabetically
> 2. Fixed wrapped line
> 
> Signed-off-by: Johannes Pointner <johannes.pointner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>

Copying the devicetree mailing list.

Looks ok to me, though I'll wait a bit to see if there is feedback
on this or the addition of epcos to the list of manufacturers from
the devicetree group. Unless there is negative feedback, I'll queue
it up for 3.17.

Thanks,
Guenter

> ---
>  .../devicetree/bindings/hwmon/ntc_thermistor.txt   |  1 +
>  Documentation/hwmon/ntc_thermistor                 |  5 +++
>  drivers/hwmon/Kconfig                              |  2 +-
>  drivers/hwmon/ntc_thermistor.c                     | 50 +++++++++++++++++++++-
>  include/linux/platform_data/ntc_thermistor.h       |  1 +
>  5 files changed, 57 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> index b117b2e..2391e5c 100644
> --- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> +++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
> @@ -3,6 +3,7 @@ NTC Thermistor hwmon sensors
>  
>  Requires node properties:
>  - "compatible" value : one of
> +	"epcos,b57330v2103"
>  	"murata,ncp15wb473"
>  	"murata,ncp18wb473"
>  	"murata,ncp21wb473"
> diff --git a/Documentation/hwmon/ntc_thermistor b/Documentation/hwmon/ntc_thermistor
> index 057b770..c5e05e2 100644
> --- a/Documentation/hwmon/ntc_thermistor
> +++ b/Documentation/hwmon/ntc_thermistor
> @@ -6,6 +6,11 @@ Supported thermistors from Murata:
>    Prefixes: 'ncp15wb473', 'ncp18wb473', 'ncp21wb473', 'ncp03wb473', 'ncp15wl333'
>    Datasheet: Publicly available at Murata
>  
> +Supported thermistors from EPCOS:
> +* EPCOS NTC Thermistors B57330V2103
> +  Prefixes: b57330v2103
> +  Datasheet: Publicly available at EPCOS
> +
>  Other NTC thermistors can be supported simply by adding compensation
>  tables; e.g., NCP15WL333 support is added by the table ncpXXwl333.
>  
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index 02d3d85..b34d673 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -1061,7 +1061,7 @@ config SENSORS_NTC_THERMISTOR
>  
>  	  Currently, this driver supports
>  	  NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333
> -	  from Murata.
> +	  from Murata and B57330V2103 from EPCOS.
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called ntc-thermistor.
> diff --git a/drivers/hwmon/ntc_thermistor.c b/drivers/hwmon/ntc_thermistor.c
> index bdfbe91..25c8deb 100644
> --- a/drivers/hwmon/ntc_thermistor.c
> +++ b/drivers/hwmon/ntc_thermistor.c
> @@ -51,6 +51,7 @@ static const struct platform_device_id ntc_thermistor_id[] = {
>  	{ "ncp21wb473", TYPE_NCPXXWB473 },
>  	{ "ncp03wb473", TYPE_NCPXXWB473 },
>  	{ "ncp15wl333", TYPE_NCPXXWL333 },
> +	{ "b57330v2103", TYPE_B57330V2103},
>  	{ },
>  };
>  
> @@ -133,6 +134,47 @@ static const struct ntc_compensation ncpXXwl333[] = {
>  	{ .temp_c	= 125, .ohm	= 707 },
>  };
>  
> +/*
> + * The following compensation table is from the specification of EPCOS NTC
> + * Thermistors Datasheet
> + */
> +static const struct ntc_compensation b57330v2103[] = {
> +	{ .temp_c	= -40, .ohm	= 190030 },
> +	{ .temp_c	= -35, .ohm	= 145360 },
> +	{ .temp_c	= -30, .ohm	= 112060 },
> +	{ .temp_c	= -25, .ohm	= 87041 },
> +	{ .temp_c	= -20, .ohm	= 68104 },
> +	{ .temp_c	= -15, .ohm	= 53665 },
> +	{ .temp_c	= -10, .ohm	= 42576 },
> +	{ .temp_c	= -5, .ohm	= 34001 },
> +	{ .temp_c	= 0, .ohm	= 27326 },
> +	{ .temp_c	= 5, .ohm	= 22096 },
> +	{ .temp_c	= 10, .ohm	= 17973 },
> +	{ .temp_c	= 15, .ohm	= 14703 },
> +	{ .temp_c	= 20, .ohm	= 12090 },
> +	{ .temp_c	= 25, .ohm	= 10000 },
> +	{ .temp_c	= 30, .ohm	= 8311 },
> +	{ .temp_c	= 35, .ohm	= 6941 },
> +	{ .temp_c	= 40, .ohm	= 5825 },
> +	{ .temp_c	= 45, .ohm	= 4911 },
> +	{ .temp_c	= 50, .ohm	= 4158 },
> +	{ .temp_c	= 55, .ohm	= 3536 },
> +	{ .temp_c	= 60, .ohm	= 3019 },
> +	{ .temp_c	= 65, .ohm	= 2588 },
> +	{ .temp_c	= 70, .ohm	= 2227 },
> +	{ .temp_c	= 75, .ohm	= 1924 },
> +	{ .temp_c	= 80, .ohm	= 1668 },
> +	{ .temp_c	= 85, .ohm	= 1451 },
> +	{ .temp_c	= 90, .ohm	= 1266 },
> +	{ .temp_c	= 95, .ohm	= 1108 },
> +	{ .temp_c	= 100, .ohm	= 973 },
> +	{ .temp_c	= 105, .ohm	= 857 },
> +	{ .temp_c	= 110, .ohm	= 757 },
> +	{ .temp_c	= 115, .ohm	= 671 },
> +	{ .temp_c	= 120, .ohm	= 596 },
> +	{ .temp_c	= 125, .ohm	= 531 },
> +};
> +
>  struct ntc_data {
>  	struct device *hwmon_dev;
>  	struct ntc_thermistor_platform_data *pdata;
> @@ -173,6 +215,8 @@ static const struct of_device_id ntc_match[] = {
>  		.data = &ntc_thermistor_id[3] },
>  	{ .compatible = "murata,ncp15wl333",
>  		.data = &ntc_thermistor_id[4] },
> +	{ .compatible = "epcos,b57330v2103",
> +		.data = &ntc_thermistor_id[5]},
>  
>  	/* Usage of vendor name "ntc" is deprecated */
>  	{ .compatible = "ntc,ncp15wb473",
> @@ -490,6 +534,10 @@ static int ntc_thermistor_probe(struct platform_device *pdev)
>  		data->comp = ncpXXwl333;
>  		data->n_comp = ARRAY_SIZE(ncpXXwl333);
>  		break;
> +	case TYPE_B57330V2103:
> +		data->comp = b57330v2103;
> +		data->n_comp = ARRAY_SIZE(b57330v2103);
> +		break;
>  	default:
>  		dev_err(&pdev->dev, "Unknown device type: %lu(%s)\n",
>  				pdev_id->driver_data, pdev_id->name);
> @@ -546,7 +594,7 @@ static struct platform_driver ntc_thermistor_driver = {
>  
>  module_platform_driver(ntc_thermistor_driver);
>  
> -MODULE_DESCRIPTION("NTC Thermistor Driver from Murata");
> +MODULE_DESCRIPTION("NTC Thermistor Driver");
>  MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org>");
>  MODULE_LICENSE("GPL");
>  MODULE_ALIAS("platform:ntc-thermistor");
> diff --git a/include/linux/platform_data/ntc_thermistor.h b/include/linux/platform_data/ntc_thermistor.h
> index c7285b5..0a6de4c 100644
> --- a/include/linux/platform_data/ntc_thermistor.h
> +++ b/include/linux/platform_data/ntc_thermistor.h
> @@ -26,6 +26,7 @@ struct iio_channel;
>  enum ntc_thermistor_type {
>  	TYPE_NCPXXWB473,
>  	TYPE_NCPXXWL333,
> +	TYPE_B57330V2103,
>  };
>  
>  struct ntc_thermistor_platform_data {
> -- 
> 2.0.1
> 

      parent reply	other threads:[~2014-07-01 13:50 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <CAJKbBDDFD294xnqkYq_auW=ppMyPJxigYUF-YAhXZVXw3NN5Xg@mail.gmail.com>
     [not found] ` <53AD7F8F.7070501@roeck-us.net>
     [not found]   ` <2420621.lSeA9X6AqK@lenovobook>
2014-06-29 19:45     ` [PATCH 1/2] Adds the vendor prefix "epcos" to vendor-prefixes.txt Guenter Roeck
     [not found]   ` <1591178.8bErWY6Byk@lenovobook>
     [not found]     ` <1714701.bPhuGb1mhL@lenovobook>
2014-07-01 13:50       ` Guenter Roeck [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140701135056.GA512@roeck-us.net \
    --to=linux-0h96xk9xttrk1umjsbkqmq@public.gmane.org \
    --cc=ch.naveen-Sze3O3UU22JBDgjK7y7TUQ@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=jdelvare-l3A5Bk7waGM@public.gmane.org \
    --cc=johannes.pointner-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-iio-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=lm-sensors-GZX6beZjE8VD60Wz+7aTrA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).