From mboxrd@z Thu Jan 1 00:00:00 1970 From: Russell King - ARM Linux Subject: Re: [PATCH v3 RESEND] drm/i2c: tda998x: Fix lack of required reg in DT documentation Date: Wed, 2 Jul 2014 16:27:04 +0100 Message-ID: <20140702152704.GL32514@n2100.arm.linux.org.uk> References: <20140619104732.4ae7f6d3@armhf> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: Content-Disposition: inline In-Reply-To: <20140619104732.4ae7f6d3@armhf> List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Errors-To: dri-devel-bounces@lists.freedesktop.org Sender: "dri-devel" To: Jean-Francois Moine Cc: devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org List-Id: devicetree@vger.kernel.org On Thu, Jun 19, 2014 at 10:47:32AM +0200, Jean-Francois Moine wrote: > The I2C address (reg) is required for the TDA998x driver to be loaded > and initialized. > > Signed-off-by: Jean-Francois Moine > --- > - v3 > - change subject to drm/i2c > - v2 > - don't force the I2C address to be 0x70 > This patch applies to linux-next. I had hoped that DT people would pick this up, as it's touching their documentation. However, it seems not, so I've added it to my fixes queue, which I'll send RSN to David. Thanks. -- FTTC broadband for 0.8mile line: now at 9.7Mbps down 460kbps up... slowly improving, and getting towards what was expected from it.