devicetree.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Felipe Balbi <balbi@ti.com>
To: Keerthy <j-keerthy@ti.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, mark.rutland@arm.com,
	galak@codeaurora.org, robh+dt@kernel.org, linux@arm.linux.org.uk,
	balbi@ti.com, tony@atomide.com, kishon@ti.com
Subject: Re: [PATCH 4/5] ARM: dts: AM437x: Add TPS65218 device tree nodes
Date: Thu, 3 Jul 2014 09:23:47 -0500	[thread overview]
Message-ID: <20140703142347.GJ5814@saruman.home> (raw)
In-Reply-To: <1404395102-21469-5-git-send-email-j-keerthy@ti.com>

[-- Attachment #1: Type: text/plain, Size: 2128 bytes --]

On Thu, Jul 03, 2014 at 07:15:01PM +0530, Keerthy wrote:
> Add TPS65218 device tree nodes.
> 
> Signed-off-by: Keerthy <j-keerthy@ti.com>
> ---
>  arch/arm/boot/dts/am437x-gp-evm.dts |   38 +++++++++++++++++++++++++++++++++++
>  1 file changed, 38 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts
> index 003766c..fc35d24 100644
> --- a/arch/arm/boot/dts/am437x-gp-evm.dts
> +++ b/arch/arm/boot/dts/am437x-gp-evm.dts
> @@ -260,6 +260,44 @@
>          status = "okay";
>          pinctrl-names = "default";
>          pinctrl-0 = <&i2c0_pins>;
> +	clock-frequency = <400000>;

same as before, also indentation is wrong, but I see indentation was
already wrong on this file, perhaps add a patch before this one fixing
that so this file is indented with tabs only ?

> +
> +	tps65218: tps65218@24 {
> +		reg = <0x24>;
> +		compatible = "ti,tps65218";
> +		interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
> +		interrupt-parent = <&gic>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +
> +		dcdc1: regulator-dcdc1 {
> +			compatible = "ti,tps65218-dcdc1";
> +			/* VDD_CORE voltage limits min of OPP50 and max of OPP100 */
> +			regulator-name = "vdd_core";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <1144000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +
> +		dcdc2: regulator-dcdc2 {
> +			compatible = "ti,tps65218-dcdc2";
> +			/* VDD_MPU voltage limits min of OPP50 and max of OPP_NITRO */
> +			regulator-name = "vdd_mpu";
> +			regulator-min-microvolt = <912000>;
> +			regulator-max-microvolt = <1378000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};

also missing dcdc3/4/5. (6 has a non-populated 0 ohm resistor, so it
should be turned off).

> +		ldo1: regulator-ldo1 {
> +			compatible = "ti,tps65218-ldo1";
> +			regulator-min-microvolt = <1800000>;
> +			regulator-max-microvolt = <1800000>;
> +			regulator-boot-on;
> +			regulator-always-on;
> +		};
> +	};
>  };
>  
>  &i2c1 {
> -- 
> 1.7.9.5
> 

-- 
balbi

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]

  reply	other threads:[~2014-07-03 14:23 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2014-07-03 13:44 [PATCH 0/5] ARM: dts: AM43x: Add devcice tree nodes Keerthy
2014-07-03 13:44 ` [PATCH 1/5] mfd: Add DT bindings for tps65218 PMIC Keerthy
2014-07-03 14:15   ` Felipe Balbi
2014-07-03 13:44 ` [PATCH 2/5] regulator: Add DT bindings for tps65218 PMIC regulators Keerthy
2014-07-03 14:16   ` Felipe Balbi
2014-07-03 13:45 ` [PATCH 3/5] ARM: dts: AM43x: Add TPS65218 device tree nodes Keerthy
2014-07-03 14:20   ` Felipe Balbi
2014-07-03 13:45 ` [PATCH 4/5] ARM: dts: AM437x: " Keerthy
2014-07-03 14:23   ` Felipe Balbi [this message]
2014-07-03 13:45 ` [PATCH 5/5] ARM: configs: omap2plus_defconfig: enable TPS65218 configs Keerthy
2014-07-03 14:24   ` Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20140703142347.GJ5814@saruman.home \
    --to=balbi@ti.com \
    --cc=devicetree@vger.kernel.org \
    --cc=galak@codeaurora.org \
    --cc=j-keerthy@ti.com \
    --cc=kishon@ti.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux@arm.linux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).