Re: [PATCH 1/2] I2C: EMMA Mobile I2C master driver

[Wolfram Sang <wsa@the-dreams.de>]

[-- Attachment #1: Type: text/plain, Size: 1245 bytes --]

On Tue, Jun 17, 2014 at 11:57:24AM +0200, Wolfram Sang wrote:
> On Tue, Feb 18, 2014 at 06:38:43PM +0100, Wolfram Sang wrote:
> > On Tue, Sep 03, 2013 at 05:49:29PM +0100, Ian Molton wrote:
> > > Add a driver for the EMMA mobile I2C block.
> > > 
> > > The driver supports low and high-speed interrupt driven PIO transfers.
> > > 
> > > Signed-off-by: Ian Molton <ian.molton@codethink.co.uk>
> > 
> > > --- a/drivers/i2c/busses/Kconfig
> > > +++ b/drivers/i2c/busses/Kconfig
> > > @@ -777,6 +777,16 @@ config I2C_RCAR
> > >  	  This driver can also be built as a module.  If so, the module
> > >  	  will be called i2c-rcar.
> > >  
> > > +config I2C_EM
> > > +	tristate "EMMA Mobile series I2C adapter"
> > > +	depends on I2C && HAVE_CLK
> > > +	help
> > > +	  If you say yes to this option, support will be included for the
> > > +	  I2C interface on the Renesas Electronics EM/EV family of processors.
> > > +
> > > +	  This driver can also be built as a module.  If so, the module
> > > +	  will be called i2c-em
> > > +
> > 
> > Please keep it sorted.
> 
> Ping. Still any interest in this one?

I happen to have access to a kzm9d board meanwhile. Do you have the
board enablement patches still somewhere?


[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 819 bytes --]