Re: [PATCH v2 1/3] usb: dwc3: add ST dwc3 glue layer to manage dwc3 HC

[Lee Jones <lee.jones-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>]

On Tue, 22 Jul 2014, Felipe Balbi wrote:

> On Tue, Jul 22, 2014 at 04:45:03PM +0100, Lee Jones wrote:
> > > > > > +static void st_dwc3_init(struct st_dwc3 *dwc3_data)
> > > > > > +{
> > > > > > +	u32 reg = st_dwc3_readl(dwc3_data->glue_base, USB2_CLKRST_CTRL);
> > > > > > +
> > > > > > +	reg |= aux_clk_en(1) | ext_cfg_reset_n(1) | xhci_revision(1);
> > > > > > +	reg &= ~sw_pipew_reset_n(1);
> > > > > 
> > > > > 1?  Better to add defines for these magic numbers.  What is 1 anyway?
> > > > 
> > > > They are just bit setting macros, I've converted them over to use BIT macro now,
> > > > so it no longer takes a parameter.
> > > 
> > > the macros are better, but make them upper case as everybody else.
> > 
> > When you say that the macros are better, what do you mean?
> > 
> > Defines do the job in a manner which is a great deal cleaner:
> > 
> > #define AUX_CLK_EN        BIT(0)
> > #define SW_PIPEW_RESET_N  BIT(4)
> > #define EXT_CFG_RESET_N   BIT(8)
> > #define XHCI_REVISION     BIT(12)
> > 
> > reg = AUX_CLK_EN | SW_PIPEW_RESET_N | XHCI_REVISION;
> > reg &= ~SW_PIPEW_RESET_N
> 
> this is what I meant ;-) I see what I wrote can be very ambiguous :-p

Okay great, thanks for clarifying. :)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html